Day tank double-walled, 700 L, Hybrid-VA, UREA

Item no.: TTD-750-HY-VA-UR

TTD-750-HY-VA-UR Double-walled day tank (hybrid) for supplying with urea.

- Material outside: steel S 235 JR
- Material inside: stainless steel V4A 1.4571
- Certified acc. German DIBT: Z-38.12-23
- Volume: 100% filling height approx.: 730 ltr
- Volume: 95% filling height approx.: 700 ltr

Standard dimension:

- Length: 1,510 mm
- Length total: 1,530 mm
- Width: 750 mm
- Width total: 775 mm
- Height: 755 mm
- Height total: 880 mm
- Weight: 248 kg (appr. without equipment, empty)

Category: day tank double-walled (250 L - 1.950 L)


Prices visible after login
incl. Material surcharge
Available

Delivery status: 6-8 weeks



MOUNTING EQUIPMENT

For placing the tank on a pair of feet (square tube), a stand bracket for raised floor installation by up to 1500 mm or for wall mounting (only economically sensible up to TTE-990).

  • Feet (1 pair) for TTE/TTD-500/750/990

    Feet (1 pair) for TTE/TTD-500/750/990

    Material: steel S 235 JR
    2-C-Coating in RAL 7032
    Square pipe 100 x 100 x 3 mm
    Length: 750 mm
    Weight/Pair: 14kg

  • Column for TTE/TTD-500/750 H=500
    Column for TTE/TTD-500/750 H=500
  • Column for TTE/TTD-500/750 H=1000
    Column for TTE/TTD-500/750 H=1000
  • Column for TTE/TTD-500/750 H=1500
    Column for TTE/TTD-500/750 H=1500
  • Wall bracket for TTE/TTD-750/990
    Wall bracket for TTE/TTD-750/990
    Steel S 235 JRG2
    Length: 750 mm
    Weight/Pair: 18 kg
    (incl. reinforcement discs, welded on each day tank)
CONTENT DISPLAY

Mechanical (float) or electrical (rod probe) content indicators and evaluation units.

  • Float level indicator type 1000

    - adjustable for tank heights from 900 to 2.000 mm
    - Display scale in percent
    - Step thread: 2" and 1"
    - Display ABS shockproof
    - Float PE

    Delivery only!

  • Float level indicator D/UR/LO
    - Tank heights from 0 to 1.600 mm
    - Display scale in cm
    - Thread 1".
    - Temperature 0 to +40C
    - Float PE
  • Level Sensor
    Stabsonde LC-Vs (Schwimmer) 750 mm
    Ausgangssignal: 4-20 mA
    Tankhöhe: 750 mm
    • Reduzierung PE 2" auf 1.1/4"
    • Anschlussstecker M12
  • Level probe / Content display
    - 0...0,25 bar
    - 0...250 mbar
    - 0...3.63 psi
    - 0...25 kpa
    - Analogue signal
    - 4...20 mA
    - 5 m FEP cable
    - -10...85 C
    - IP 68
    - Relative pressure
  • Level control module in percent

    - Display in percent
    - Configuration of up to 4 switching points
    - In addition a  4 - 20 mA sensor is required
    - The 4 - 20 mA signal can also be routed to other analysis modules
    - Not required for container with PLC

LEVEL SENSOR

The level sensor is generally used for the automatic request or shutdown of pumps when predefined fill level points (undercut or exceeded) are monitored in tanks.

  • Level sensor (float switch)  (Bio-)Diesel

    - Output: Reed Contact
    - Switching function: 1 closer, falling level
    - Ambient temperature range: -5 C to + 70 C
    - Medium temperature: -5 C to + 70 C
    - with floater made of stainless steel
    - adjustable height 50 - 2.000 mm
    - cable length 5 m
    - dry run protection

  • Level sensor (float switch)  (Bio-)Diesel

    - Output: Reed Contact
    - Switching function: 1 closer, falling level
    - Ambient temperature range: -5 C to + 70 C
    - Medium temperature: -5 C to + 70 C
    - with floater made of stainless steel
    - adjustable height 50 - 2.000 mm
    - cable length 5 m
    - dry run protection

  • Level sensor (float switch)  (Bio-)Diesel

    - Output: Reed Contact
    - Switching function: 1 closer, falling level
    - Ambient temperature range: -5 C to + 70 C
    - Medium temperature: -5 C to + 70 C
    - with floater made of stainless steel
    - adjustable height 50 - 2.000 mm
    - cable length 5 m
    - dry run protection

  • Level indicator (float switch) lubricating oil/H2O
    - floater made of stainless steel
    - adjustable height 50 - 2.000 mm,
    - Cable length: 5,000 mm
    - for lubricating oil and water
    - T: max 40 C
    Only delivery!
  • Level indicator (float switch) lubricating oil/H2O
    - floater made of stainless steel
    - adjustable height 50 - 2.000 mm,
    - Cable length: 5,000 mm
    - for lubricating oil and water
    - T: max 40 C
    Only delivery!
  • Level indicator (float switch) lubricating oil/H2O
    - floater made of stainless steel
    - adjustable height 50 - 2.000 mm,
    - Cable length: 5,000 mm
    - for lubricating oil and water
    - T: max 40 C
    Only delivery!
  • Level transmitter Urea
    - for 40 % urea solution
    - up to 40C
    - Cable length 5 m
    - single-stage
    - Connection 3/8"
  • 1-fold cable screw
    - Reducer G2" male - M16x1.5 female
    - Cable screw M16x1,5 AG PVC
    - 1x Sealing ring
    - Only delivery!
  • 2-fold cable screw

    - Red. "G2" AG
    - 2x M16 x 1.5 IG PE
    - 2x Cable gland M16x1.5 AG PVC
    - 1x seal ring 58 x 2,5 mm
    - Only delivery!

  • 4-fold cable screw

    - Red. "G2" AG
    - 4x M16 x 1.5 IG PE
    - 4x Cable gland M16x1.5 AG PVC
    - 1x seal ring 58 x 2,5 mm
    - 2x Seal plug
    - Only delivery!

OVERFILL PROTECTION

Equipment required under water law to limit the max. filling level when filled by a tanker or using fixed piping.

  • limiting level transmitter Type GWG 12-K1
    - only for diesel / heating oil with CE-mark
    - with 1,5 m cable
    - Reduction 2" x 1" (AG/IG)
    - Mandatory for tanks with a volume of 1000 litres or more
  • Overfill prevention Type 76 A, 200 mm
    - Probe length 200 mm
    - Diameter: 16 mm
    - Connection: G 3/4" AG
    Delivery only!
  • OFP Level indicator Type 76 AH, 80° C, 200 mm

    - Temperature resistant up to 80C
    - Probe length 200 mm
     -connection: G 3/4" AG

    Delivery only!

  • Overfill prevention level indicator, UREA, 200 mm

    - aqueous urea solution
    - probe length 200 mm
    - connection: G 3/4" AG

    Delivery only!

  • Level Limiter Type: NB 220 H

    Level Limiter Type: NB 220 H

    - with potential free changer
    - Supply: 230 V, 50 Hz
    - not to be mounted directly on the tank for media such as kerosene or bioethanol

    Only delivery!
  • OFP Level indicator Type LS300 ATEX

    - ATEX-Approval
    - Sensor length 200 mm
    - Connection: G 3/8" male
    - Material: 1.4571
    - with integrated overvoltage protection
    - Hazard class AI

    Only delivery!

  • OFP Level limiter Type LS500 ATEX

    - Protection class IP 40
    - 230 V, 50 Hz
    - 2x potential free changeover contacts
    - Ignition type: (EEx ia/ib) IIB/IIC
    - with test button for testing the level detector in installed condition

    Delivery only!

  • Overfill protection confirmation box

    - Mounting plate
    - Voltage 24 V/DC
    - Housing protection grade IP 54
    - switch-off-electronic
    - Receipt key
    - Flash light 1 Joule
    - Horn 95 Decibel
    - Road tanker connection 907-Z
    - not to be mounted directly on the tank for media such as kerosene or bioethanol

    Only Delivery!
Pumps

Z-PK is a combination of a hand vane pump and a centrifugal pump in one housing. In the event of a complete network failure, refilling of the day tank is also ensured manually with the hand vane pump.

  • Pump set 230 V

    Pumpenkombination für Heizöl und Diesel

    bestehend aus:

    • 1x Kreiselpumpe
    • Förderleistung: 5 bis 50 ltr./min.
    • 1x Handflügelpumpe
    • Förderleistung: 15 ltr./min.
    • Tropfwanne Typ Z-PK-2100
    • Korrosionsschutz
    • Nicht montiert, nur geliefert!
  • Pump set 400 V

    - Medium: diesel / heating oil
    - 1x centrifugal pump:
       - Delivery rate: 5 to 50 ltr./min.
       -Pumping height: 46 to 10 m Fl.s.
       -Pumping pressure: 3 bar
       -setting pressure: 3 bar
       -Suction height: 6 m
       -voltage: 400 V
       -current consumption: 2.0 A
       -frequency: 50 Hz
       -Electric power: 0.6 kW
       -speed: 2,900 rpm
    - 1x hand wing pump:
       - delivery rate: 15 ltr./min.
       - delivery head: approx. 10 m Fl.s.
       - suction height: 4 m
    - 1x twin pump body:
       - 4 pieces mounting holes
       - diameter: 11 mm
       - Two inlets DN 25 / 1" on the suction side
       - Outlet on the pressure side DN 20 / 3/4
       - Connection internal thread for:
       - 2 ball valves 1" for suction side
       - 1 ball valve 3/4" for pressure side
       - 1x drip tray
       - completely assembled and piped on console
    - Corrosion protection 2-component paint in RAL 7032

    Not assembled, only delivered!

  • Centrifugal pump Type PK-80-015

    Kreiselpumpe

    • Fördermenge:
    • 43 ltr./min. bei 5 m FLS
    • 11 ltr./min. bei 30 m FLS
    • Förderhöhe: 46 - 10 mWs
    • Spannung: 230 V
    • Motorleistung: 0,55 kW
    • Nennstrom: 5 A
    • Motorschutzart: IP 44
    • Korrosionsschutz
  • Centrifugal pump 43-11 ltr., 400 V

    Centrifugal pump

    • Flow rate:
      • 43 ltr./min. at 5 m FLS
      • 11 ltr./min. at 30 m FLS
    • Voltage: 400 V
    • Electrical power: 0,6 kW
    • Rated current: 2 A
    • Connections:
      • suction line: 1"
      • pressure line: 1"
    • Weight: 10,8 kg
  • Drip tray for centrifugal pump

    Drip tray for centrifugal pump for separate wall mounting

    Corrosion protection:

    • 2K paint in RAL 7032
  • Drip tray for hand vane pump
    - for separate wall mounting
    - Corrosion protection K paint in RAL 7032
  • Drip tray for hand vane pump
    - for separate wall mounting
    - Corrosion protection K paint in RAL 7032
  • Drip tray for hand vane pump
    - for separate wall mounting
    - Corrosion protection K paint in RAL 7032
OPERATING MANUAL

Manual by letter at the owner's expense

  • Manual by letter at the owner's expense
    The operating instructions, data sheets and certificates are available in paper form delivered by letter.
Price as configured:

Description

TTD-750-HY-VA-UR Double-walled day tank (hybrid) for supplying with urea.

- Material outside: steel S 235 JR
- Material inside: stainless steel V4A 1.4571
- Certified acc. German DIBT: Z-38.12-23
- Volume: 100% filling height approx.: 730 ltr
- Volume: 95% filling height approx.: 700 ltr

Standard dimension:

- Length: 1,510 mm
- Length total: 1,530 mm
- Width: 750 mm
- Width total: 775 mm
- Height: 755 mm
- Height total: 880 mm
- Weight: 248 kg (appr. without equipment, empty)

Standard Equipment

1x AM-595 Burst protection 115 mm
1x AM-S-380-002-VA Maintenance opening 380 x 440 mm stainless steel
1x AM-001-16 Float level indicator D/UR/LO
1x AM-359 Vacuum meter static Type KÜR 5
1x F-MS-38-016 Ball valve 3/8" IG/AG wing
1x AM-090 Type plate
6x AM-948 Dust cover 2 "yellow conical
4x F-VA-2-001 Blanking plug 2" VA with thread
2x F-A4-2-002 Reducing adapter 2 "x 3/4" AG/IG VA 316
2x F-A4-2-018 Reducing adapter 2 "x1" AG/IG VA 316
1x AM-911-E Venting connection DN 50 250 mm in stainless steel
1x AM-920-E Suction pipe 1" with foot valve stainless steel
1x BE2 Manual by download

- Maintenance opening 380 x 440 mm
- Connection on top: 6x 2"
- Connection on top: 1x flange 160 mm, 1" socket
- Connection on the side top: 1x 2"
- Connection on top: 1x 3/8" vacuum connection
- Connection on top: 1x " Vacuum leak detector

Corrosion protection:

- inside stainless steel
- outside:L-A-1, RAL 7032

Documentation:

- Test documents in German (Sending by mail)
- Test certificate
- Overview drawing
- Building inspection approval
- Operating Instructions Tank
- Datasheets / Operating Instructions for accessories
- Certificates WHG and ISO 9001
- additional documentation in Paper, on CD or by mail will be charged extra

Volume: 250 ltr.
Type: Daytank
Medium: Diesel-biodiesel
Place: Inside
Material: Steel
Wall Design: double walled
Level: Level 2

PDF-Documents

TTE/TTD Equipment Wand Bracket WK, Foot FS, Stand Column ST

TTD Day Tank Double Wall

TTD-A4 Day Tank Double Wall

TTD-S/A4 Day Tank Double Wall