Delivery times
NOTE: As the delivery times of our suppliers are getting longer and longer due to the Covid pandemic, we are forced to adjust any promised delivery dates accordingly.
Day tank single wall, 2500 L, diesel, fuel oil, bio diesel

Item no.: TTE-XL-2500-DB-01

TTE-XL-2500-D
Single-walled day tank for supplying aggregates with fuel or lubricating oil.

- material: steel S 235 JR
- certified acc. German DIBT: Z-38.11-127
- volume: 100% filling height approx.: 2,900 ltr
- volume: 95% filling height approx.: 2,800 ltr

Standard dimension:

- length: 2,000 mm
- length total: 2,135 mm
- width: 1,250 mm
- width total: 1,260 mm
- height: 1,250 mm
- height total: 1,450 mm
- weight: 530 kg (appr. without equipment, empty)

Category: Tagestank einwandig (2500 L - 5.000 L)


Prices visible after login
incl. Material surcharge
Available

Delivery status: 8-10 weeks



SAFETY CONCEPT

Single-walled tank made of steel. If no on-site collecting space is available, a catch basin made of steel type TW must be used. Protection against fuel leakage by leakage detection of the optional oil warning probe type OM 5 with evaluation unit.

  • Oil trap single-walled for TTE-XL-2500
    • Material: steel S 235 JR
    • General type approval: Z-38.11-127
    • Volume total: 3.000 ltr.
  • Oil-water detector type OM 5 incl. probe
    - For storage rooms, manholes, catch basins, single/double-walled tanks
    - With visual/acoustic alarm
    - Test/acknowledge button and relay output
    - Self-monitoring probe
    - max. 5 probes connectable to evaluation unit
  • Measuring probe for OM5
    - additional measuring probe
    - evaluation unit is needed
CONTENT DISPLAY

Mechanical (float) or electrical (rod probe) content indicators and evaluation units.

  • Float level indicator type 1000

    - adjustable for tank heights from 900 to 2.000 mm
    - Display scale in percent
    - Step thread: 2" and 1½"
    - Display ABS shockproof
    - Float PE

    Delivery only!

  • Float level indicator D/UR/LO
    - Tank heights from 0 to 1.600 mm
    - Display scale in cm
    - Thread 1".
    - Temperature 0 to +40°C
    - Float PE
  • Stabsonde  für Tanköhe 1250 mm

    Stabsonde NR 56 für Tanköhe 1250 mm

    • Tankinhaltsgeber für hochviskose Medien
    • Einbaulänge: 1270 mm
    • Ausgangssignal: 4-20 mA/3L
    • Betriebsspannug:9-32V DC
    • Anschluss: G1 1/4"
  • Level probe / Content display
    - 0...0,25 bar
    - 0...250 mbar
    - 0...3.63 psi
    - 0...25 kpa
    - Analogue signal
    - 4...20 mA
    - 5 m FEP cable
    - -10...85 °C
    - IP 68
    - Relative pressure
  • Level control module in percent

    - Display in percent
    - Configuration of up to 4 switching points
    - In addition a  4 - 20 mA sensor is required
    - The 4 - 20 mA signal can also be routed to other analysis modules
    - Not required for container with PLC

LEVEL SENSOR

The level sensor is generally used for the automatic request or shutdown of pumps when predefined fill level points (undercut or exceeded) are monitored in tanks.

  • Level sensor  (Bio-)Diesel, heavy oil

    - float switch
    - Output: Reed Contact
    - Switching function: 1 closer, falling level
    - Ambient temperature range: -5 ° C to + 70 ° C
    - Medium temperature: -5 ° C to + 70 ° C
    - with floater made of stainless steel
    - adjustable height 50 - 2.000 mm
    - cable length 5 m
    - dry run protection

  • Level sensor  (Bio-)Diesel, heavy oil

    - float switch
    - Output: Reed Contact
    - Switching function: 1 closer, falling level
    - Ambient temperature range: -5 ° C to + 70 ° C
    - Medium temperature: -5 ° C to + 70 ° C
    - with floater made of stainless steel
    - adjustable height 50 - 2.000 mm
    - cable length 5 m
    - dry run protection

  • Level sensor  (Bio-)Diesel, heavy oil

    - float switch
    - Output: Reed Contact
    - Switching function: 1 closer, falling level
    - Ambient temperature range: -5 ° C to + 70 ° C
    - Medium temperature: -5 ° C to + 70 ° C
    - with floater made of stainless steel
    - adjustable height 50 - 2.000 mm
    - cable length 5 m
    - dry run protection

  • Level indicator  lubricating oil/H2O
    - float switch
    - floater made of stainless steel
    - adjustable height 50 - 2.000 mm,
    - Cable length: 5,000 mm
    - for lubricating oil and water
    - T: max 40 ° C
    Only delivery!
  • Level indicator  lubricating oil/H2O
    - float switch
    - floater made of stainless steel
    - adjustable height 50 - 2.000 mm,
    - Cable length: 5,000 mm
    - for lubricating oil and water
    - T: max 40 ° C
    Only delivery!
  • Level indicator  lubricating oil/H2O
    - float switch
    - floater made of stainless steel
    - adjustable height 50 - 2.000 mm,
    - Cable length: 5,000 mm
    - for lubricating oil and water
    - T: max 40 ° C
    Only delivery!
  • Level transmitter Urea
    - for 40 % urea solution
    - up to 40°C
    - Cable length 5 m
    - single-stage
    - Connection 3/8"
  • Level switch EX

    - control mini float switch EX
    - made of stainless steel
    - Cable length 2 m-normally open
    - Cable material PVC shielded
    - Temperature -30°C to + 45°C
    - Dry-run protection

  • 1-fold cable screw
    - Reducer G2" male - M16x1.5 female
    - Cable screw M16x1,5 AG PVC
    - 1x Sealing ring
    - Only delivery!
  • 2-fold cable screw

    - Red. "G2" AG
    - 2x M16 x 1.5 IG PE
    - 2x Cable gland M16x1.5 AG PVC
    - 1x seal ring 58 x 2,5 mm
    - Only delivery!

  • 4-fold cable screw

    - Red. "G2" AG
    - 4x M16 x 1.5 IG PE
    - 4x Cable gland M16x1.5 AG PVC
    - 1x seal ring 58 x 2,5 mm
    - 2x Seal plug
    - Only delivery!

  • 1-fold cable gland 2" MS EX
    1x cable screw consists of: - Reduction 2"x 1" AI Ms - red. G1" male - M16x1.5 female - CEAG Ex Leitungseinführung M16x1,5 GHG9601955R0022
OVERFILL PROTECTION

Equipment required under water law to limit the max. filling level when filled by a tanker or using fixed piping.

  • limiting level transmitter Type GWG 12-K1
    - only for diesel / heating oil with CE-mark
    - with 1,5 m cable
    - Reduction 2" x 1" (AG/IG)
    - Mandatory for tanks with a volume of 1000 litres or more
  • Overfill prevention Type 76 A, 200 mm
    - Probe length 200 mm
    - Diameter: 16 mm
    - Connection: G 3/4" AG
  • OFP Level indicator Type 76 AH, 80° C, 200 mm

    - Temperature resistant up to 80°C
    - Probe length 200 mm
     -connection: G 3/4" AG

    Delivery only!

  • Overfill prevention level indicator, UREA, 200 mm

    - aqueous urea solution
    - probe length 200 mm
    - connection: G 3/4" AG

    Delivery only!

  • Level Limiter Type: NB 220 H

    Level Limiter Type: NB 220 H

    - with potential free changer
    - Supply: 230 V, 50 Hz
    - not to be mounted directly on the tank for media such as kerosene or bioethanol

  • OFP Level indicator Type LS300 ATEX

    - ATEX-Approval
    - Sensor length 200 mm
    - Connection: G 3/8" male
    - Material: 1.4571
    - with integrated overvoltage protection
    - Hazard class AI

    Only delivery!

  • OFP Level limiter Type LS500 ATEX

    - Protection class IP 40
    - 230 V, 50 Hz
    - max 5 W
    - -25 °C bis +50 °C
    - 2x potential free changeover contacts
    - Ignition type: (EEx ia/ib) IIB/IIC
    - with test button for testing the level detector in installed condition

    Delivery only!

  • Overfill protection confirmation box

    - Mounting plate
    - Voltage 24 V/DC
    - Housing protection grade IP 54
    - switch-off-electronic
    - Receipt key
    - Flash light 1 Joule
    - Horn 95 Decibel
    - Road tanker connection 907-Z
    - not to be mounted directly on the tank for media such as kerosene or bioethanol

    Only Delivery!
Pumps

Z-PK is a combination of a hand vane pump and a centrifugal pump in one housing. In the event of a complete network failure, refilling of the day tank is also ensured manually with the hand vane pump.

  • Centrifugal pump type PK-80-015 230 V

    - medium: D / HEL
    - flow rate:
       - min: 11 ltr./min. at 30 mWs delivery height
       - max: 43 ltr./min at 5 mWs delivery height
    - suction height: up to 9 m
    - voltage: 230 V
    - current: 5,0 A
    - frequency: 50 Hz
    - electrical power: 0,6 kW
    - connection:
       - 1" on the suction side
       - 1" on the suction side
    - protection: IP 44
    - class F insulation
    - corrosion protection:
       - two-component coating in RAL 7032

  • Centrifugal pump type PK-80-016 400 V

    - medium: D / HEL
    - flow rate:
       - min: 11 ltr./min. at 30 mWs delivery height
       - max: 43 ltr./min at 5 mWs delivery height
    - suction height: up to 9 m
    - voltage: 400 V
    - current: 2,0 A
    - frequency: 50 Hz
    - electrical power: 0,6 kW
    - connection:
       - 1" on the suction side
       - 1" on the suction side
    - protection: IP 44
    - class F insulation
    - corrosion protection:
       - two-component coating in RAL 7032

  • Drip tray for centrifugal pump

    Drip tray for centrifugal pump for separate wall mounting

    Corrosion protection:

    • 2K paint in RAL 7032
  • Hand wing pump K1 3/4" 17 l/min

    - medium: D / HEL
    - flow rate:
       - max: ca. 17 ltr./min. at 10 m delivery height
    - suction height: 4 m
    - connection: 3/4" female thread
    - Corrosion protection:
       - two-component coating in RAL 7032
    - incl. wooden lever
    - suitable for liquids up to 80 °C

  • Drip tray for hand vane pump
    - for separate wall mounting
    - Corrosion protection K paint in RAL 7032
  • Drip tray for hand vane pump
    - for separate wall mounting
    - Corrosion protection K paint in RAL 7032
  • Drip tray for hand vane pump
    - for separate wall mounting
    - Corrosion protection K paint in RAL 7032
OPERATING MANUAL

Manual by letter at the owner's expense

  • Manual by letter at the owner's expense
    The operating instructions, data sheets and certificates are available in paper form delivered by letter.
Price as configured:

Description

TTE-XL-2500-D
Single-walled day tank for supplying aggregates with fuel or lubricating oil.

- material: steel S 235 JR
- certified acc. German DIBT: Z-38.11-127
- volume: 100% filling height approx.: 2,900 ltr
- volume: 95% filling height approx.: 2,800 ltr

Standard dimension:

- length: 2,000 mm
- length total: 2,135 mm
- width: 1,250 mm
- width total: 1,260 mm
- height: 1,250 mm
- height total: 1,450 mm
- weight: 530 kg (appr. without equipment, empty)

Standard equipment:

1x AM-595 Burst protection Ø 115 mm
1x AM-001 Float level indicator type 1000
1x AM-090 Type plate
8x AM-948 Dust cover 2 "yellow conical
1x AM-925.2 Filling pipe 2"
6x AM-941 Blanking plug 2" screwable PE with seal
2x AM-960-21P Reduction 2 "x 3/4" PE black, Krampitz
2x AM-960-22P Reduction 2 "x 1" PE black, Krampitz
1x F-MS-1-034 Ball valve 3/4", DN 20, IA thread
1x F-MS-1-016 Bracket 90°, IA, 3/4", Brass
1x F-MS-12-018 KFE ball valve 1/2"
1x AM-911 Ventilation nozzle DN 50 250mm
1x V-10-001 Krampitz Sealfix M 10 ml
1x BE2 Manual by download

- inspection opening DN 500
- entry steps in the tank for inspection
- feet 100 x 100 x 3 mm
- crane eyes
- connection on top: 10x 2"
- connection on the side top: 2x 2" (right/left)
- bottom connection: 1x 1" flow / 1x 1/2" residual discharge

Corrosion protection:
- inside: raw, oiled
- outside: coating L-A-1, RAL 7032

Documentation:
- Test documents in German (Sending by mail)
- Test certificate
- Overview drawing
- Building inspection approval
- Operating Instructions Tank
- Datasheets / Operating Instructions for accessories
- Certificates WHG and ISO 9001
- additional documentation in Paper, on CD or by mail will be charged extra


Volume: 2500 ltr.
Type: Daytank
Medium: Diesel-biodiesel
Place: Inside
Wall Design: single walled
Material: Steel
Level: Level 1
Product weight: 530,00 Kg

PDF-Documents

TW-XL Tank-Catch Sump

TW-XL-A4 Tank-Catch Sump

TTE-XL Day Tank Single Wall XL

TTE-XL-A4 Day Tank Single Wall XL