Delivery times
NOTE: As the delivery times of our suppliers are getting longer and longer due to the Covid pandemic, we are forced to adjust any promised delivery dates accordingly.
Day tank single wall, 500 L stainless steel, UREA
Note: The illustrations may also contain accessories and special equipment which are not included in the standardscope of delivery because of example illustration.

Item no.: TTE-500-VA-UR

TTE-500-VA-UR
Single-walled day tank for supplying aggregates with urea.

- material: stainless steel V4A 1.4571
- certified acc. German DIBT: Z-38.11-86
- volume 100% filling height appr.: 500 ltr
- volume 95% filling height appr.: 470 ltr

Standard dimension:

- length appr.: 1,510 mm
- length total appr.: 1,550 mm
- width appr.: 750 mm
- width total appr.: 775 mm
- height appr.: 500 mm
- height total appr.: 530 mm
- weight: 115 kg (appr. without equipment, empty)

Category: day tank single-walled (100 L - 1950 L)

Prices visible after login
incl. Material surcharge
Available

Delivery status: 8-10 weeks

SAFETY CONCEPT

Single-walled tank made of steel. If no on-site collecting space is available, a catch basin made of steel type TW must be used. Protection against fuel leakage by leakage detection of the optional oil warning probe type OM 5 with evaluation unit.

  • Oil trap single-walled for TTE-250

    Drip tray for TTE-250

    • Material: Steel S 235 JR
    • Gen. bauaufs. Approval: Z-38.11-86
    • Volume 100%: 300 ltr.

    Dimensions:

    • Length: 1,260 mm
    • Total length: 1,420 mm
    • Width: 500 mm
    • Total width: 660 mm
    • Height: 500 mm
    • Total height: 700 mm
    • Weight: 85 kg

    Standard equipment:

    • Consoles for attachment to the tank
    • Feet with ground attachment
  • Measuring probe for OM5
    - additional measuring probe
    - evaluation unit is needed
  • Oil-water detector type OM 5 incl. probe
    - For storage rooms, manholes, catch basins, single/double-walled tanks
    - With visual/acoustic alarm
    - Test/acknowledge button and relay output
    - Self-monitoring probe
    - max. 5 probes connectable to evaluation unit
MOUNTING EQUIPMENT

For placing the tank on a pair of feet (square tube), a stand bracket for raised floor installation by up to 1500 mm or for wall mounting (only economically sensible up to TTE-990).

  • Feet (1 pair) for TTE/TTD 50/100/250

    feet (1 pair) for TTE/TTD-50/100/250

    - steel S 235 JR
    - galvanized
    - two-component coating in RAL 7032
    - square pipe 100 x 100 x 3 mm

    measurements:
    - length: 500 mm
    - weight (pair): 9 kg

  • Column for TTE/TTD-250 H=500

    column for TTE/TTD-250 H=500

    - steel S235 JR
    - two-component coating in RAL 7032

    measurements:
    - height: 500 mm
    - width: 500 mm
    - length: 1.250 mm
    - weight: 37 kg

  • Column for TTE/TTD-250 H=1000

    column for TTE/TTD-250 H=1000

    - steel S235 JR
    - two-component coating in RAL 7032

    measurements:
    - height: 1.000 mm
    - width: 500 mm
    - length: 1.250 mm
    - weight: 46 kg

  • Column for TTE/TTD-250 H=1500

    column for TTE/TTD-250 H=1500

    - steel S235 JR
    - two-component coating in RAL 7032

    measurements:
    - height: 1.500 mm
    - width: 500 mm
    - length: 1.250 mm
    - weight: 55 kg

  • Wall bracket for TTE/TTD-100/250/500

    wall bracket for TTE/TTD-100/250/500

    - steel S 235 JRG2
    - two-component coating in RAL 7032
    - incl. reinforcement discs, welded on each tank

    measurements:
    - length: 500 mm
    - weight: 12 kg

CONTENT DISPLAY

Mechanical (float) or electrical (rod probe) content indicators and evaluation units.

  • Float level indicator type 1000

    - adjustable for tank heights from 900 to 2.000 mm
    - Display scale in percent
    - Step thread: 2" and 1½"
    - Display ABS shockproof
    - Float PE

    Delivery only!

  • Float level indicator D/UR/LO
    - Tank heights from 0 to 1.600 mm
    - Display scale in cm
    - Thread 1".
    - Temperature 0 to +40°C
    - Float PE
  • Level Sensor
    Stabsonde LC-Vs (Schwimmer) 500 mm
    Ausgangssignal: 4-20 mA
    Tankhöhe: 500 mm
    • Reduzierung PE 2" auf 1.1/4"
    • Anschlussstecker M12
  • Level probe / Content display
    - 0...0,25 bar
    - 0...250 mbar
    - 0...3.63 psi
    - 0...25 kpa
    - Analogue signal
    - 4...20 mA
    - 5 m FEP cable
    - -10...85 °C
    - IP 68
    - Relative pressure
  • Level control module in percent

    - Display in percent
    - Configuration of up to 4 switching points
    - In addition a  4 - 20 mA sensor is required
    - The 4 - 20 mA signal can also be routed to other analysis modules
    - Not required for container with PLC

LEVEL SENSOR

The level sensor is generally used for the automatic request or shutdown of pumps when predefined fill level points (undercut or exceeded) are monitored in tanks.

  • Level sensor (Bio-)Diesel, heavy oil

    - float switch
    - Output: Reed Contact
    - Switching function: 1 closer, falling level
    - Ambient temperature range: -5 ° C to + 70 ° C
    - Medium temperature: -5 ° C to + 70 ° C
    - with floater made of stainless steel
    - adjustable height 50 - 2.000 mm
    - cable length 5 m
    - dry run protection

  • Level sensor (Bio-)Diesel, heavy oil

    - float switch
    - Output: Reed Contact
    - Switching function: 1 closer, falling level
    - Ambient temperature range: -5 ° C to + 70 ° C
    - Medium temperature: -5 ° C to + 70 ° C
    - with floater made of stainless steel
    - adjustable height 50 - 2.000 mm
    - cable length 5 m
    - dry run protection

  • Level sensor (Bio-)Diesel, heavy oil

    - float switch
    - Output: Reed Contact
    - Switching function: 1 closer, falling level
    - Ambient temperature range: -5 ° C to + 70 ° C
    - Medium temperature: -5 ° C to + 70 ° C
    - with floater made of stainless steel
    - adjustable height 50 - 2.000 mm
    - cable length 5 m
    - dry run protection

  • Level indicator lubricating oil/H2O
    - float switch
    - floater made of stainless steel
    - adjustable height 50 - 2.000 mm,
    - Cable length: 5,000 mm
    - for lubricating oil and water
    - T: max 40 ° C
    Only delivery!
  • Level indicator lubricating oil/H2O
    - float switch
    - floater made of stainless steel
    - adjustable height 50 - 2.000 mm,
    - Cable length: 5,000 mm
    - for lubricating oil and water
    - T: max 40 ° C
    Only delivery!
  • Level indicator lubricating oil/H2O
    - float switch
    - floater made of stainless steel
    - adjustable height 50 - 2.000 mm,
    - Cable length: 5,000 mm
    - for lubricating oil and water
    - T: max 40 ° C
    Only delivery!
  • Level transmitter Urea
    - for 40 % urea solution
    - up to 40°C
    - Cable length 5 m
    - single-stage
    - Connection 3/8"
  • Level switch EX

    - control mini float switch EX
    - made of stainless steel
    - Cable length 2 m-normally open
    - Cable material PVC shielded
    - Temperature -30°C to + 45°C
    - Dry-run protection

  • 1-fold cable screw
    - Reducer G2" male - M16x1.5 female
    - Cable screw M16x1,5 AG PVC
    - 1x Sealing ring
    - Only delivery!
  • 2-fold cable screw

    - Red. "G2" AG
    - 2x M16 x 1.5 IG PE
    - 2x Cable gland M16x1.5 AG PVC
    - 1x seal ring 58 x 2,5 mm
    - Only delivery!

  • 4-fold cable screw

    - Red. "G2" AG
    - 4x M16 x 1.5 IG PE
    - 4x Cable gland M16x1.5 AG PVC
    - 1x seal ring 58 x 2,5 mm
    - 2x Seal plug
    - Only delivery!

  • 1-fold cable gland 2" MS EX
    1x cable screw consists of: - Reduction 2"x 1" AI Ms - red. G1" male - M16x1.5 female - CEAG Ex Leitungseinführung M16x1,5 GHG9601955R0022
OVERFILL PROTECTION

Equipment required under water law to limit the max. filling level when filled by a tanker or using fixed piping.

  • limiting level transmitter Type GWG 12-K1
    - only for diesel / heating oil with CE-mark
    - with 1,5 m cable
    - Reduction 2" x 1" (AG/IG)
    - Mandatory for tanks with a volume of 1000 litres or more
  • Overfill prevention Type 76 A, 200 mm
    - Probe length 200 mm
    - Diameter: 16 mm
    - Connection: G 3/4" AG
  • OFP Level indicator Type 76 AH, 80° C, 200 mm

    - Temperature resistant up to 80°C
    - Probe length 200 mm
     -connection: G 3/4" AG

    Delivery only!

  • Overfill prevention level indicator, UREA, 200 mm

    - aqueous urea solution
    - probe length 200 mm
    - connection: G 3/4" AG

    Delivery only!

  • Level Limiter Type: NB 220 H

    Level Limiter Type: NB 220 H

    - with potential free changer
    - Supply: 230 V, 50 Hz
    - not to be mounted directly on the tank for media such as kerosene or bioethanol

  • OFP Level indicator Type LS300 ATEX

    - ATEX-Approval
    - Sensor length 200 mm
    - Connection: G 3/8" male
    - Material: 1.4571
    - with integrated overvoltage protection
    - Hazard class AI

    Only delivery!

  • OFP Level limiter Type LS500 ATEX

    - Protection class IP 40
    - 230 V, 50 Hz
    - max 5 W
    - -25 °C bis +50 °C
    - 2x potential free changeover contacts
    - Ignition type: (EEx ia/ib) IIB/IIC
    - with test button for testing the level detector in installed condition

    Delivery only!

  • Overfill protection confirmation box

    - Mounting plate
    - Voltage 24 V/DC
    - Housing protection grade IP 54
    - switch-off-electronic
    - Receipt key
    - Flash light 1 Joule
    - Horn 95 Decibel
    - Road tanker connection 907-Z
    - not to be mounted directly on the tank for media such as kerosene or bioethanol

    Only Delivery!
Pumps

Z-PK is a combination of a hand vane pump and a centrifugal pump in one housing. In the event of a complete network failure, refilling of the day tank is also ensured manually with the hand vane pump.

  • Centrifugal pump type PK-80-015 230 V

    - medium: D / HEL
    - flow rate:
       - min: 11 ltr./min. at 30 mWs delivery height
       - max: 43 ltr./min at 5 mWs delivery height
    - suction height: up to 9 m
    - voltage: 230 V
    - current: 5,0 A
    - frequency: 50 Hz
    - electrical power: 0,6 kW
    - connection:
       - 1" on the suction side
       - 1" on the suction side
    - protection: IP 44
    - class F insulation
    - corrosion protection:
       - two-component coating in RAL 7032

  • Centrifugal pump type PK-80-016 400 V

    - medium: D / HEL
    - flow rate:
       - min: 11 ltr./min. at 30 mWs delivery height
       - max: 43 ltr./min at 5 mWs delivery height
    - suction height: up to 9 m
    - voltage: 400 V
    - current: 2,0 A
    - frequency: 50 Hz
    - electrical power: 0,6 kW
    - connection:
       - 1" on the suction side
       - 1" on the suction side
    - protection: IP 44
    - class F insulation
    - corrosion protection:
       - two-component coating in RAL 7032

  • Drip tray for centrifugal pump

    Drip tray for centrifugal pump for separate wall mounting

    Corrosion protection:

    • 2K paint in RAL 7032
  • Hand wing pump K1 3/4" 17 l/min

    - medium: D / HEL
    - flow rate:
       - max: ca. 17 ltr./min. at 10 m delivery height
    - suction height: 4 m
    - connection: 3/4" female thread
    - Corrosion protection:
       - two-component coating in RAL 7032
    - incl. wooden lever
    - suitable for liquids up to 80 °C

  • Drip tray for hand vane pump
    - for separate wall mounting
    - Corrosion protection K paint in RAL 7032
  • Drip tray for hand vane pump
    - for separate wall mounting
    - Corrosion protection K paint in RAL 7032
  • Drip tray for hand vane pump
    - for separate wall mounting
    - Corrosion protection K paint in RAL 7032
OPERATING MANUAL

Manual by letter at the owner's expense

  • Manual by letter at the owner's expense
    The operating instructions, data sheets and certificates are available in paper form delivered by letter.
Price as configured:

Description

TTE-500-VA-UR
Single-walled day tank for supplying aggregates with urea.

- material: stainless steel V4A 1.4571
- certified acc. German DIBT: Z-38.11-86
- volume 100% filling height appr.: 500 ltr
- volume 95% filling height appr.: 470 ltr

Standard dimension:

- length appr.: 1,510 mm
- length total appr.: 1,550 mm
- width appr.: 750 mm
- width total appr.: 775 mm
- height appr.: 500 mm
- height total appr.: 530 mm
- weight: 115 kg (appr. without equipment, empty)

Standard equipment:

1x AM-595 Burst protection Ø 115 mm
1x AM-001-16 Float level indicator D/UR/LO
1x AM-090 Type plate
8x AM-948 Dust cover 2 "yellow conical
4x F-VA-2-001 Blanking plug 2" VA with thread
2x F-A4-2-002 Reducing adapter 2 "x 3/4" AG/IG VA 316
2x F-A4-2-018 Reducing piece 2 "x1" AG/IG VA 316
1x F-A4-34-005 Ball valve 3/4", IA, 2-piece, lever, AISI 316
1x F-A4-34-007 Angle 90° 3/4" IG/AG 1.4571
1x F-A4-12-012 KFE-valve 1/2" AG, stainless steel
1x AM-920-E Suction pipe 1" with foot valve stainless steel flanged
1x AM-911-E Venting connection DN 50 250 mm in stainless steel
1x V-10-001 Krampitz Sealfix M 10 ml
1x BE2 Manual by download

- connection on top: 6x 2"
- connection on the side top: 2x 2" (right/left)
- bottom connection: 1x 3/4" flow / 1x 1/2" residual discharge

Corrosion protection:

- inside: raw
- outside: stainless steel

Documentation:
- Test documents in German (Sending by mail)
- Test certificate
- Overview drawing
- Building inspection approval
- Operating Instructions Tank
- Datasheets / Operating Instructions for accessories
- Certificates WHG and ISO 9001
- additional documentation in Paper, on CD or by mail will be charged extra