Storage tank double-walled (20.000 ltr.) diesel/heating oil Variant F

Item no.: KTD-F-I-20-F-D

KTD-F-I-20-F-D
Storage tank double-walled, I (indoor installation), 20 (20.000 ltr.), F (inside raw, thermal insulation, earthquake zone 1)
Medium: diesel/bio-diesel/heating oil

- Material: steel S 235 JR
- double-walled, robust, cubic body
- General construction. Approval: Z-38.12-23
- Volume 100%: 20.000 ltr.
- Volume 95%: 19.050 ltr.

Dimensions:

- length: 5.500 mm
- Overall length: 5.690 mm
- width: 2.000 mm
- Overall width: 2.380 mm
- height: 2.000 mm
- Overall height: 2.405 mm
- Weight: 4.955 kg

Category: Thermo / EBZ1 (F)


Prices visible after login
Available

Delivery status: 8-10 weeks



Packing flat

The stated packaging flat rate applies exclusively to standard packaging and exclusively to truck transport. Seaworthy packaging will be charged separately.

Coating (inside) in m

The antistatic inner coating is a corrosion protection for resistance to stress caused by media such as kerosene or other fuels with a low discharge capacity and a tendency to static charging.

Color

* mandatory field

  • RAL-7032 "Pebble gray"
    Standard outside coating color. Other RAL colors are available for an added charge.
Standardfittings und -armaturen
  • Blanking plug 2" screwable PE with seal
    Blanking plug 2" screwable PE with seal
  • Reduction 2 "x 1" PE black, Krampitz
    Reduction 2 "x 1" PE black, Krampitz Attention! Only suitable for electronic components, not for media-carrying cables!
  • Reduction 2 "x 3/4" PE black, Krampitz
    Reducer 2 "x 3/4" PE black, with sealing rubber Krampitz Attention! Only suitable for electronic components, not for media-carrying cables!
  • Ventilation nozzle DN 50 250mm
    Ventilation socket DN 50 with cap
    - Ventilation cap 2" female
    - Ventilation pipe 2" x 250 mm
    - height: 250mm
Leak monitoring device

*mandatory field

  • Vacuum meter static Type KÜR 5
    - General technical approval: Z-65.22-158
    - Connection 1/2 "AG
    - Radial connection (bottom)
  • cover Vacuum meter static Type KÜR 5

    cover Vacuum meter static Type KÜR 5

    - outdoor installation
    - Z-65.22-158
    - Material: steel
  • Vakuum leak detector Eurovac-HV (AC 230V)

    Leak monitoring device Type Eurovac-HV
    Medium: Diesel / heating oil
     

    - Voltage: 230 V
    - with potential free contact
    - KVU-No.: 312.011.15

  • Leak monitoring device Type VL-330
    Leak monitoring device Type VL-330
    • Voltage: 24 V DC
    • for double-walled tanks
Sensors: Level indicator
  • Level sensor (float switch)  (Bio-)Diesel

    - Output: Reed Contact
    - Switching function: 1 closer, falling level
    - Ambient temperature range: -5 C to + 70 C
    - Medium temperature: -5 C to + 70 C
    - with floater made of stainless steel
    - adjustable height 50 - 2.000 mm
    - cable length 5 m
    - dry run protection

  • Level sensor (float switch)  (Bio-)Diesel

    - Output: Reed Contact
    - Switching function: 1 closer, falling level
    - Ambient temperature range: -5 C to + 70 C
    - Medium temperature: -5 C to + 70 C
    - with floater made of stainless steel
    - adjustable height 50 - 2.000 mm
    - cable length 5 m
    - dry run protection

  • Level sensor (float switch)  (Bio-)Diesel

    - Output: Reed Contact
    - Switching function: 1 closer, falling level
    - Ambient temperature range: -5 C to + 70 C
    - Medium temperature: -5 C to + 70 C
    - with floater made of stainless steel
    - adjustable height 50 - 2.000 mm
    - cable length 5 m
    - dry run protection

  • Level indicator (float switch) lubricating oil/H2O
    - floater made of stainless steel
    - adjustable height 50 - 2.000 mm,
    - Cable length: 5,000 mm
    - for lubricating oil and water
    - T: max 40 C
    Only delivery!
  • 1-fold cable screw
    - Reducer G2" male - M16x1.5 female
    - Cable screw M16x1,5 AG PVC
    - 1x Sealing ring
    - Only delivery!
  • 2-fold cable screw

    - Red. "G2" AG
    - 2x M16 x 1.5 IG PE
    - 2x Cable gland M16x1.5 AG PVC
    - 1x seal ring 58 x 2,5 mm
    - Only delivery!

  • 4-fold cable screw

    - Red. "G2" AG
    - 4x M16 x 1.5 IG PE
    - 4x Cable gland M16x1.5 AG PVC
    - 1x seal ring 58 x 2,5 mm
    - 2x Seal plug
    - Only delivery!

Sensors: overfill protection

Equipment required under water law to limit the max. filling level when filled by a tanker or using fixed piping.

  • limiting level transmitter Type GWG 12-K1
    - only for diesel / heating oil with CE-mark
    - with 1,5 m cable
    - Reduction 2" x 1" (AG/IG)
    - Mandatory for tanks with a volume of 1000 litres or more
  • Level Limiter Type: NB 220 H

    Level Limiter Type: NB 220 H

    - with potential free changer
    - Supply: 230 V, 50 Hz
    - not to be mounted directly on the tank for media such as kerosene or bioethanol

    Only delivery!
  • Overfill prevention Type 76 A

    Overfill prevention Sensor

    - Type 76 A, Sensor length 200 mm
    - Connection: G 3/4" male
    Only delivery!
  • Overfill protection confirmation box

    - Mounting plate
    - Voltage 24 V/DC
    - Housing protection grade IP 54
    - switch-off-electronic
    - Receipt key
    - Flash light 1 Joule
    - Horn 95 Decibel
    - Road tanker connection 907-Z
    - not to be mounted directly on the tank for media such as kerosene or bioethanol

    Only Delivery!
  • Extra device Typ 907 Z
    - for automatic shutdown of the tanker pump
    - Additional device for interrupting the filling process
    - Control voltage: 24 V DC
    - steel
Sensors: Tank heating

Plant equipment for reliable prevention of paraffin excretion of the fuel at falling temperatures and maintenance of the pump and nozzle viscosity of the oil in the intake area (frost-free from 8C to 12C).

  • Tank heating system TH 380/3<br/><br/>- Power:      3.00
    Tank heating system TH 380/3

    - Power: 3.000 Watt
    - Voltage: 230/400 V, 50 Hz

    incl. Switch cabinet Typ AE-811
Pumps

Z-PK is a combination of a hand vane pump and a centrifugal pump in one housing. In the event of a complete network failure, refilling of the day tank is also ensured manually with the hand vane pump.

  • Pump set 230 V

    Pumpenkombination für Heizöl und Diesel

    bestehend aus:

    • 1x Kreiselpumpe
    • Förderleistung: 5 bis 50 ltr./min.
    • 1x Handflügelpumpe
    • Förderleistung: 15 ltr./min.
    • Tropfwanne Typ Z-PK-2100
    • Korrosionsschutz
    • Nicht montiert, nur geliefert!
  • Pump set 400 V

    - Medium: diesel / heating oil
    - 1x centrifugal pump:
       - Delivery rate: 5 to 50 ltr./min.
       -Pumping height: 46 to 10 m Fl.s.
       -Pumping pressure: 3 bar
       -setting pressure: 3 bar
       -Suction height: 6 m
       -voltage: 400 V
       -current consumption: 2.0 A
       -frequency: 50 Hz
       -Electric power: 0.6 kW
       -speed: 2,900 rpm
    - 1x hand wing pump:
       - delivery rate: 15 ltr./min.
       - delivery head: approx. 10 m Fl.s.
       - suction height: 4 m
    - 1x twin pump body:
       - 4 pieces mounting holes
       - diameter: 11 mm
       - Two inlets DN 25 / 1" on the suction side
       - Outlet on the pressure side DN 20 / 3/4
       - Connection internal thread for:
       - 2 ball valves 1" for suction side
       - 1 ball valve 3/4" for pressure side
       - 1x drip tray
       - completely assembled and piped on console
    - Corrosion protection 2-component paint in RAL 7032

    Not assembled, only delivered!

  • Centrifugal pump Type PK-80-015

    Kreiselpumpe

    • Fördermenge:
    • 43 ltr./min. bei 5 m FLS
    • 11 ltr./min. bei 30 m FLS
    • Förderhöhe: 46 - 10 mWs
    • Spannung: 230 V
    • Motorleistung: 0,55 kW
    • Nennstrom: 5 A
    • Motorschutzart: IP 44
    • Korrosionsschutz
  • Centrifugal pump 43-11 ltr., 400 V

    Centrifugal pump

    • Flow rate:
      • 43 ltr./min. at 5 m FLS
      • 11 ltr./min. at 30 m FLS
    • Voltage: 400 V
    • Electrical power: 0,6 kW
    • Rated current: 2 A
    • Connections:
      • suction line: 1"
      • pressure line: 1"
    • Weight: 10,8 kg
  • Drip tray for centrifugal pump

    Drip tray for centrifugal pump for separate wall mounting

    Corrosion protection:

    • 2K paint in RAL 7032
  • Hand vane pump K1 3/4" 14 ltr/min

    - Material: cast iron
    - incl. wooden lever
    - Weight: 6,2 kg
    - Connection: 3/4"
    - Flow: 15 ltr/min
    - Flow height: 10 m
    - Suction height: 4 m
    - Corrosion protection: 2-C-coating in RAL 7032

  • Drip tray for hand vane pump
    - for separate wall mounting
    - Corrosion protection K paint in RAL 7032
  • Drip tray for hand vane pump
    - for separate wall mounting
    - Corrosion protection K paint in RAL 7032
  • Drip tray for hand vane pump
    - for separate wall mounting
    - Corrosion protection K paint in RAL 7032
  • Hand crank pump
    - Material: aluminium
    - Connection: 1".
    - Delivery rate: 100 ltr/min
    - Delivery head approx.: 10 m
    - Suction height approx.: 4 m
    - Corrosion protection: 2-component paint in RAL 7032
    - No documentation available!
Special options

additional equipment

  • Suction pipe 1" flanged with foot valve
    - for tank height up to 2000mm
    - flanged
    - diameter: 160mm
    - 4-hole flange with welded 1" socket
    - seal
  • Suction pipe 2" flanged with foot valve

    - foot valve
    - flanged
    - diameter 160mm
    - 4-hole flange with welded bush 1?
    - seal

  • Filling socket DN 50 45°

    Filling socket DN 50

    - filling pipe closure 2" x 2 1/2"
    - 1 x angle 2", 45 female
  • Filling nozzle DN 80 with tank truck coupling

    Filling nozzle DN 80 with tank truck coupling

    -father coupling VK 80Ms. DIN 28450
    -blind cover MK 80M
    -brass tanker chain L=300mm

  • Krampitz Sealfix M 10 ml
    Krampitz Sealfix M
    • Dichtmittel
    • Schraubensicherung
    • 10 ml
Manual

* mandarory field

  • Manual by download
    After delivery you will receive an email with the links for download.
  • Manual by letter at the owner's expense
    The operating instructions, data sheets and certificates are available in paper form delivered by letter.
Price as configured:

Description

KTD-F-I-20-F-D
Storage tank double-walled, I (indoor installation), 20 (20.000 ltr.), F (inside raw, thermal insulation, earthquake zone 1)
Medium: diesel/bio-diesel/heating oil

- Material: steel S 235 JR
- double-walled, robust, cubic body
- General construction. Approval: Z-38.12-23
- Volume 100%: 20.000 ltr.
- Volume 95%: 19.050 ltr.

Dimensions:

- length: 5.500 mm
- Overall length: 5.690 mm
- width: 2.000 mm
- Overall width: 2.380 mm
- height: 2.000 mm
- Overall height: 2.405 mm
- Weight: 4.955 kg

Standard equipment:

- Dome entry DN 600
- Access steps in the tank for revision
- 5 block flanges for flange adapter DN 160 (A 240)
   - 5 flange adapters with 2 sockets 2" each
- 4 heavy-duty crane eyes

Basic package:

-Thermal insulation of tank outside walls
-Prime coating of the steel walls before insulation is installed
-Thickness 80 mm
-Sandwich panels
-Zink sheet plated with insulation wool
-Incl. 2 vent opening with weather- and insect protection at each longitudinal side

The thermal insulation removes the ladder on the tank! Attention, the roof area is not accessible!

- Base assembly with continuous longitudinal beams and integrated forklift pocket
- Nameplate
- Burst protection 115
- Roof assembly dome entrance DN 600
   - Material: Steel S235 JR
   - incl. washers, nuts
   - Sponge rubber square profile 8 x 12mm, self-adhesive
- Surge Wall
   - number of units 1

Corrosion protection:

- inside raw, oiled
- outside coating L-A-1, RAL 7032

Documentation:

- Test documents in German (by mail)
- test certificate
- overview drawing
- Building inspectorate approval
- Tank operating instructions
- Data Sheets / Operating Instructions for Accessories
- Certificates WHG and ISO 9001
- Additional documentation in paper form, on CD or by e-mail will be charged separately.

Volume: 20000 ltr.
Medium: Diesel-biodiesel
Place: Inside
Thermo-Iso: Yes
Earthquakes: Yes