Storage tank double-walled (2.500 ltr.) Lubricating Oil Variant A

Item no.: KTD-F-A-2.5-A-LO

KTD-F-A-2.5-A-LO
Storage tank double-walled, A (outdoor installation), 2.5 (2.500 ltr.), A (inside
raw)
Medium: lubricating oil

- Material: mild steel S 235 JR
- double-walled, robust, cubic shape
- General Design Certificate: Z-38.12-23
- Volumen 100%: appr. 2.670 ltr.
- Volumen 95%: appr. 2.510 ltr.

Dimensions appr.:

- Length: 2.000 mm
- Width: 1.000 mm
- Overall width: 1.220 mm
- Height: 1.500 mm
- Overall height: 1.850 mm
- Weight: 1.110 kg

Category: Ohne (A)


Prices visible after login
Available

Delivery status: 10-12 weeks



Packing flat

The stated packaging flat rate applies exclusively to standard packaging and exclusively to truck transport. Seaworthy packaging will be charged separately.

  • without flat-rate packaging fee for exclusive delivery of accessories
  • packaging flat
    Fix costs for packing of of tanks over 2000 ltr. up to 5000 ltr.
Coating (inside) in m

The antistatic inner coating is a corrosion protection for resistance to stress caused by media such as kerosene or other fuels with a low discharge capacity and a tendency to static charging.

  • without inside coating
    raw oiled inside
  • 1 m Coating inside - bottom tray - for oily mediums
    Single or multi-layer color structure  - bottom tray -
    Corrosion protection for endurance because of the use of oily, non-aggressive mediums like lubricant oil, fuel oil, Diesel, Biodiesel, Petrol, or cooling- or lubricating water that dont tend to static charges
    - Coating area: complete floor and 300 mm of the walls
    - Surface preparation: Sandblasting Grit (Sa 2,5; Rz 50-65)
    - Layers 2 ceramic-composite layers
    - Total layer thickness NDFT: 500m
    remaining areas are raw
  • 1 m Coating - inside the tank - for oily mediums
    Single or multi-layer color structure - inside the tank -
    Corrosion protection for endurance because of the use of oily, non-aggressive mediums like lubricant oil, fuel oil, Diesel, Biodiesel, Petrol, or cooling- or lubricating water that dont tend to static charges
    - Surface preparation: Sandblasting Grit (Sa 2,5; Rz 50-65)
    - Layers: 2 ceramic-composite layers
    - Total layer thickness NDFT: 500m
Color

* mandatory field

  • RAL-7032 "Pebble gray"
    Standard outside coating color. Other RAL colors are available for an added charge.
Standardfittings und -armaturen
  • Blanking plug 2" screwable PE with seal
    Blanking plug 2" screwable PE with seal
  • Reduction 2 "x 1" PE black, Krampitz
    Reduction 2 "x 1" PE black, Krampitz Attention! Only suitable for electronic components, not for media-carrying cables!
  • Reduction 2 "x 3/4" PE black, Krampitz
    Reducer 2 "x 3/4" PE black, with sealing rubber Krampitz Attention! Only suitable for electronic components, not for media-carrying cables!
  • Ventilation socket DN 50 with cap
    Ventilation socket DN 50 with cap
    - Ventilation cap 2" female
    - Ventilation pipe 2" x 250 mm
    - height: 250mm
Leak monitoring device

*mandatory field

  • Vacuum meter static Type KÜR 5
    Vacuum meter static Type KR 5
    Z-65.22-158, Connection 1/2"AG
    Radial connector (bottom)
  • Vakuum leak detector Eurovac-HV (AC 230V)

    Leak monitoring device Type Eurovac-HV
    Medium: Diesel / heating oil
     

    - Voltage: 230 V
    - with potential free contact
    - KVU-No.: 312.011.15

  • Leak monitoring device Type VL-330
    Leak monitoring device Type VL-330
    • Voltage: 24 V DC
    • for double-walled tanks
Sensors: Content display
  • Level Sensor

    Elektronische Stabsonde

    • Widerstands-Reedkette mit Schwimmermagnet betätigt
    • Ausgangssignal: 4-20 mA
    • Tankhöhe: 1500 mm
    • Reduzierung PE 2" auf 1.1/4"
    • Anschlussstecker M12"
  • Pressure transducer Type AUR LC-Vs
    • Pressure transducer Type AUR LC-Vs
    • Output signal 4-20 mA
  • Level control module in percent 1K

    Analysis module for the recording of percentage values of the tank level

    - Display in percent
    - Configuration of up to 4 switching points
    - In addition a  4 - 20 mA sensor is required
    - The 4 - 20 mA signal can also be routed to other analysis modules
    - Not required for container with PLC

Sensors: Level indicator
  • Level sensor (float switch)

    Level sensor (float switch) diesel / heating oil

    • Output: Reed Contact
    • Switching function: 1 closer, falling level
    • Ambient temperature range: -5 C to + 70 C
    • Medium temperature: -5 C to + 70 C
    • with floater made of stainless steel
    • adjustable height 50 - 2.000 mm
    • cable length 5 m
    • dry run protection
  • Level sensor (float switch)

    Level sensor (float switch) diesel / heating oil

    • Output: Reed Contact
    • Switching function: 1 closer, falling level
    • Ambient temperature range: -5 C to + 70 C
    • Medium temperature: -5 C to + 70 C
    • with floater made of stainless steel
    • adjustable height 50 - 2.000 mm
    • cable length 5 m
    • dry run protection
  • Level sensor (float switch)

    Level sensor (float switch) diesel / heating oil

    • Output: Reed Contact
    • Switching function: 1 closer, falling level
    • Ambient temperature range: -5 C to + 70 C
    • Medium temperature: -5 C to + 70 C
    • with floater made of stainless steel
    • adjustable height 50 - 2.000 mm
    • cable length 5 m
    • dry run protection
  • 1-fold cable screw

    1-fach Kabelverschraubung 2" PE mit Dichtung

  • 2-fold cable screw

    2-fach Kabelverschraubung 2" PE mit Dichtung

  • 4-fold cable screw
    4-fach Kabelverschraubung 2" PE mit Dichtung
Sensors: overfill protection

Equipment required under water law to limit the max. filling level when filled by a tanker or using fixed piping.

  • limiting level transmitter Type GWG 12-K1
    Limit value transmitter Type GWG 12-K1
    • for diesel / heating oil only
    • with 1,5 m cable and 2" / 1" reducer (OT/IT)
  • Level Limiter Type: NB 220 H

    Level Limiter Type: NB 220 H

    - with potential free changer
    - Supply: 230 V, 50 Hz
    - not to be mounted directly on the tank for media such as kerosene or bioethanol

    Only delivery!
  • Overfill prevention Type 76 A

    Overfill prevention Sensor

    - Type 76 A, Sensor length 200 mm
    - Connection: G 3/4" male
    Only delivery!
  • Overfill protection confirmation box
    Overfill protection confirmation box
    with road tanker switch-off-electronic
    consisting of:
    • Mounting plate
    • Voltage 24 V/DC
    • Housing protection grade IP 54
    • Receipt key
    • Flash light 1 Joule
    • Horn 95 Decibel
    • Road tanker connection 907-Z
    • not to be mounted directly on the tank for media such as kerosene or bioethanol
    Only Delivery!
  • Extra device Typ 907 Z

    Tank Truck Plug Type 907 Z

    - Additional device for interrupting the filling process
    - Control voltage: 24 V DC

    The additional device 907 Z is not allowed to be used in the following cases in particular:
    - Explosive liquids
    - Use in conjunction with an approved limit value transmitter for e.g. heating oil and diesel fuel
Sensors: Tank heating

Plant equipment for reliable prevention of paraffin excretion of the fuel at falling temperatures and maintenance of the pump and nozzle viscosity of the oil in the intake area (frost-free from 8C to 12C).

  • Tank heater

    Tank heater

    • certified for diesel and heating oil
    • with TÜV-certification (Germany)
    • Power: 1,5 kW
    • Voltage: 230 V / 50 Hz,
    • with integrated 1-phase controller (appr. 8-12C)
      (ON below 8C / OFF above 12C)
    • with 1-phase limiter at appr. 55C
    • recommende for tanks up to appr. 8.000 ltr.
    • For better effectiveness of the heater a  tank insulation is strongly recommended
  • Magnetic fixing for tank heating
    Magnetic fixing for tank heating
    consisting of:
    - 2x magnet 42mm x 9mm
    - 2x pipe clamp 40mm - 45mm
    - 2x countersunk screw and nut M6
Pumps

Z-PK is a combination of a hand vane pump and a centrifugal pump in one housing. In the event of a complete network failure, refilling of the day tank is also ensured manually with the hand vane pump.

  • Pump set 230 V

    Pumpenkombination für Heizöl und Diesel

    bestehend aus:

    • 1x Kreiselpumpe
    • Förderleistung: 5 bis 50 ltr./min.
    • 1x Handflügelpumpe
    • Förderleistung: 15 ltr./min.
    • Tropfwanne Typ Z-PK-2100
    • Korrosionsschutz
    • Nicht montiert, nur geliefert!
  • Pump set 400 V
    Pump set
    for heating fuel and diesel
    consisting of:
    • 1x centrifugal pump:
      • pump power: 5 up to 50 ltr./min.
      • pump height: 46 up to 10 m Fl.s.
      • Delivery pressure: 3 bar
      • Set pressure: 3 bar
      • suction height: 6 m
      • voltage: 400 V
      • current: 2,0 A
      • frequency: 50 Hz
      • electric power: 0,6 kW
      • revolution: 2.900 U/min.
    • 1x hand vane pump:
      • pump power: 15 ltr./min.
      • pump height: ca. 10 m Fl.s.
      • suction height: 4 m
    • 1x Twin pump body with
      • 4 fixing points
      • diameter: 11 mm
    • suction side two inlets DN 25 / 1"
    • pressure side one outlet DN 20 / 3/4"
    • Connection with screwing possible
      • 2 ball valves 1" installed on suction side
      • 1 ball valve 3/4" installed on pressure side
    • 1x drip tray
      • completely mounted and tubed on the console
    • Corrosion protection:
      • 2-C-Coating in RAL 7032
    Not mounted, only delivered!
  • Centrifugal pump Type PK-80-015

    Kreiselpumpe

    • Fördermenge:
    • 43 ltr./min. bei 5 m FLS
    • 11 ltr./min. bei 30 m FLS
    • Förderhöhe: 46 - 10 mWs
    • Spannung: 230 V
    • Motorleistung: 0,55 kW
    • Nennstrom: 5 A
    • Motorschutzart: IP 44
    • Korrosionsschutz
  • Centrifugal pump 43-11 ltr., 400 V

    Centrifugal pump

    • Flow rate:
      • 43 ltr./min. at 5 m FLS
      • 11 ltr./min. at 30 m FLS
    • Voltage: 400 V
    • Electrical power: 0,6 kW
    • Rated current: 2 A
    • Connections:
      • suction line: 1"
      • pressure line: 1"
    • Weight: 10,8 kg
  • Drip tray for centrifugal pump

    Drip tray for centrifugal pump for separate wall mounting

    Corrosion protection:

    • 2K paint in RAL 7032
  • packaging flat
    Fix costs for packing Z-PK
Special options

additional equipment

  • Suction pipe 1" with foot valve

    Suction pipe 1" with foot valve

    - flanged
    - diameter 160mm
    - 4-hole flange with welded bush 1?
    -and seal
    Installed!
  • Suction pipe 2" with foot valve

    Suction pipe 2" with foot valve

    - flanged
    - diameter 160mm
    - 4-hole flange with welded bush 1?
    - seal
  • Filling socket DN 50

    Filling socket DN 50

    - filling pipe closure 2" x 2 1/2"
    - 1 x angle 2", 45 female
  • Filling nozzle DN 80 with tank truck coupling

    Filling nozzle DN 80 with tank truck coupling

    -father coupling VK 80Ms. DIN 28450
    -blind cover MK 80M
    -brass tanker chain L=300mm

  • Krampitz Sealfix M 10 ml
    Krampitz Sealfix M
    • Dichtmittel
    • Schraubensicherung
    • 10 ml
Manual

* mandarory field

  • Manual by download
    After delivery you will receive an email with the links for download.
  • Manual by letter at the owner's expense
    Die Bedienungsanleitungen, Datenbltter und Zertifikate werden Ihnen in Papierform per Brief zugestellt.
Price as configured:

Description

KTD-F-A-2.5-A-LO
Storage tank double-walled, A (outdoor installation), 2.5 (2.500 ltr.), A (inside
raw)
Medium: lubricating oil

- Material: mild steel S 235 JR
- double-walled, robust, cubic shape
- General Design Certificate: Z-38.12-23
- Volumen 100%: appr. 2.670 ltr.
- Volumen 95%: appr. 2.510 ltr.

Dimensions appr.:

- Length: 2.000 mm
- Width: 1.000 mm
- Overall width: 1.220 mm
- Height: 1.500 mm
- Overall height: 1.850 mm
- Weight: 1.110 kg

Standard equipment:

- Leackage detector static Type KÜR 5
- Dome entry DN 600
- Access steps inside the tank for revision  
- 5 Connection flanges DN 160 with flange adapters 
   - 5 flanges with 2 sockets, 2" each
- 2 x lifting lugs

Basic Package

- Floor assembly with continuous longitudinal beams and integrated forklift pockets
- Nameplate
- Burst protection 115
- Dome cover DN 600
   - hatch with inside coating
   -Material: Steel S235 JR
   -incl. washers, nuts
   - rubber square sealing profile 8 x 12mm, self-adhesive
- hood element
   - Frame incl. lid
   - 2 x pipe bushings 300 x 100 mm with blind plate
   - incl. screws, washers, nuts
   - gas pressure damper
   - padlock

Corrosion protection:

- inside raw, oiled
- outside: coating L-A-3, RAL 7032

Documentation:

- Test documents in German or English, (by email or download)
- Test certificates
- General overview drawing
- Building inspectorate approval (Germany)
- Tank operating instructions
- Data Sheets / Operating Instructions for Accessories
- Certificates WHG and ISO 9001
- Additional documentation in paper form, on CD or by e-mail will be charged extra


Volume: 2500 ltr.
Place: Outside
Thermo-Iso: No
Earthquakes: No
Medium: Lubricating oil