Delivery times
NOTE: As the delivery times of our suppliers are getting longer and longer due to the Covid pandemic, we are forced to adjust any promised delivery dates accordingly.
Storage tank double-walled (40.000 ltr.) Lubricating Oil Var. A

Item no.: KTD-F-I-40-A-LO

KTD-F-I-40-A-LO
Storage tank double-walled, I (indoor installation), 40 (40.000 ltr.), A (no coating inside)

- Material: mild steel S 235 JR
- double-walled, robust, cubic shape
- General Design Certificate: Z-38.12-312
- Volumen 100%: appr. 40.320 ltr.
- Volumen 95%: appr. 38.390 ltr.

Dimensions appr.:

- Length: 11.000 mm
- Width: 2.000 mm
- Overall width: 2.220 mm
- Height: 2.000 mm
- Overall height: 2.400 mm
- Weight: 6.660 kg

Category: Ohne (A)


Prices visible after login
incl. Material surcharge
Available

Delivery status: 12 weeks



PACKAGING FLAT RATE

The stated packaging flat rate applies exclusively to standard packaging and exclusively to truck transport. Seaworthy packaging will be charged separately.

  • ohne Verpackungspauschale bei Kleinteilen
    Packing costs according to expenses
  • Packing flat rate for tanks more than 2000 ltr.

    - Tanks more than 2000 ltr.
    - Collecting tray more than 2000 ltr.

Coating (inside) in m²

The antistatic inner coating is a corrosion protection for resistance to stress caused by media such as kerosene or other fuels with a low discharge capacity and a tendency to static charging.

Color

* mandatory field

  • RAL-7032 "Pebble gray"
    Standard outside coating color. Other RAL colors are available for an added charge.
Standardfittings und -armaturen
  • Blanking plug 2" screwable PE with seal
    Blanking plug 2" screwable PE with seal
  • Reduction 2 "x 1" PE black, Krampitz
    Reduction 2 "x 1" PE black, Krampitz Attention! Only suitable for electronic components, not for media-carrying cables!
  • Reduction 2 "x 3/4" PE black, Krampitz
    Reducer 2 "x 3/4" PE black, with sealing rubber Krampitz Attention! Only suitable for electronic components, not for media-carrying cables!
  • Ventilation nozzle DN 50 250mm
    Ventilation socket DN 50 with cap
    - Ventilation cap 2" female
    - Ventilation pipe 2" x 250 mm
    - height: 250mm
Leak monitoring device

*mandatory field

  • Vacuum meter static Type KÜR 5
    - General technical approval: Z-65.22-158
    - Connection 1/2 "AG
    - Radial connection (bottom)
  • cover vacuum meter static Type KÜR 5

    cover Vacuum meter static Type KÜR 5

    - outdoor installation
    - Z-65.22-158
    - Material: steel
  • Vacuum leak detector Eurovac-HV (AC 230V)

    Leak monitoring device Type Eurovac-HV
    Medium: Diesel / heating oil
     

    - Voltage: 230 V
    - with potential free contact
    - KVU-No.: 312.011.15

  • Leak monitoring device Type VL-330
    Leak monitoring device Type VL-330
    • Voltage: 24 V DC
    • for double-walled tanks
LEVEL SENSOR

The level sensor is generally used for the automatic request or shutdown of pumps when predefined fill level points (undercut or exceeded) are monitored in tanks.

  • Level sensor  (Bio-)Diesel, heavy oil

    - float switch
    - Output: Reed Contact
    - Switching function: 1 closer, falling level
    - Ambient temperature range: -5 ° C to + 70 ° C
    - Medium temperature: -5 ° C to + 70 ° C
    - with floater made of stainless steel
    - adjustable height 50 - 2.000 mm
    - cable length 5 m
    - dry run protection

  • Level sensor  (Bio-)Diesel, heavy oil

    - float switch
    - Output: Reed Contact
    - Switching function: 1 closer, falling level
    - Ambient temperature range: -5 ° C to + 70 ° C
    - Medium temperature: -5 ° C to + 70 ° C
    - with floater made of stainless steel
    - adjustable height 50 - 2.000 mm
    - cable length 5 m
    - dry run protection

  • Level sensor  (Bio-)Diesel, heavy oil

    - float switch
    - Output: Reed Contact
    - Switching function: 1 closer, falling level
    - Ambient temperature range: -5 ° C to + 70 ° C
    - Medium temperature: -5 ° C to + 70 ° C
    - with floater made of stainless steel
    - adjustable height 50 - 2.000 mm
    - cable length 5 m
    - dry run protection

  • Level indicator  lubricating oil/H2O
    - float switch
    - floater made of stainless steel
    - adjustable height 50 - 2.000 mm,
    - Cable length: 5,000 mm
    - for lubricating oil and water
    - T: max 40 ° C
    Only delivery!
  • Level indicator  lubricating oil/H2O
    - float switch
    - floater made of stainless steel
    - adjustable height 50 - 2.000 mm,
    - Cable length: 5,000 mm
    - for lubricating oil and water
    - T: max 40 ° C
    Only delivery!
  • Level indicator  lubricating oil/H2O
    - float switch
    - floater made of stainless steel
    - adjustable height 50 - 2.000 mm,
    - Cable length: 5,000 mm
    - for lubricating oil and water
    - T: max 40 ° C
    Only delivery!
  • Level transmitter Urea
    - for 40 % urea solution
    - up to 40°C
    - Cable length 5 m
    - single-stage
    - Connection 3/8"
  • Level switch EX

    - control mini float switch EX
    - made of stainless steel
    - Cable length 2 m-normally open
    - Cable material PVC shielded
    - Temperature -30°C to + 45°C
    - Dry-run protection

  • 1-fold cable screw
    - Reducer G2" male - M16x1.5 female
    - Cable screw M16x1,5 AG PVC
    - 1x Sealing ring
    - Only delivery!
  • 2-fold cable screw

    - Red. "G2" AG
    - 2x M16 x 1.5 IG PE
    - 2x Cable gland M16x1.5 AG PVC
    - 1x seal ring 58 x 2,5 mm
    - Only delivery!

  • 4-fold cable screw

    - Red. "G2" AG
    - 4x M16 x 1.5 IG PE
    - 4x Cable gland M16x1.5 AG PVC
    - 1x seal ring 58 x 2,5 mm
    - 2x Seal plug
    - Only delivery!

  • 1-fold cable gland 2" MS EX
    1x cable screw consists of: - Reduction 2"x 1" AI Ms - red. G1" male - M16x1.5 female - CEAG Ex Leitungseinführung M16x1,5 GHG9601955R0022
Sensors: overfill protection

Equipment required under water law to limit the max. filling level when filled by a tanker or using fixed piping.

  • limiting level transmitter Type GWG 12-K1
    - only for diesel / heating oil with CE-mark
    - with 1,5 m cable
    - Reduction 2" x 1" (AG/IG)
    - Mandatory for tanks with a volume of 1000 litres or more
  • Level Limiter Type: NB 220 H

    Level Limiter Type: NB 220 H

    - with potential free changer
    - Supply: 230 V, 50 Hz
    - not to be mounted directly on the tank for media such as kerosene or bioethanol

  • Overfill prevention Type 76 A, 200 mm
    - Probe length 200 mm
    - Diameter: 16 mm
    - Connection: G 3/4" AG
  • Overfill protection confirmation box

    - Mounting plate
    - Voltage 24 V/DC
    - Housing protection grade IP 54
    - switch-off-electronic
    - Receipt key
    - Flash light 1 Joule
    - Horn 95 Decibel
    - Road tanker connection 907-Z
    - not to be mounted directly on the tank for media such as kerosene or bioethanol

    Only Delivery!
  • Extra device Typ 907 Z
    - for automatic shutdown of the tanker pump
    - Additional device for interrupting the filling process
    - Control voltage: 24 V DC
    - steel
Sensors: Tank heating

Plant equipment for reliable prevention of paraffin excretion of the fuel at falling temperatures and maintenance of the pump and nozzle viscosity of the oil in the intake area (frost-free from 8°C to 12°C).

  • frost protection heater working temperature 8°C-12°C tank heater 6000W

    Tank heater

    - certified for diesel and heating oil
    - with TÜV-certification (Germany)
    - Power: 6,0 kW
    - Voltage: 400 V / 50 Hz,
    - additional temperature switch (AE-831) required
    - (ON below 8°C / OFF above 12°C)
    - with 1-phase limiter at appr. 55°C
    - recommende for tanks up to appr. 60.000 ltr.
    - for better effectiveness of the heater a  tank insulation is strongly recommended
Pumps

Z-PK is a combination of a hand vane pump and a centrifugal pump in one housing. In the event of a complete network failure, refilling of the day tank is also ensured manually with the hand vane pump.

  • Centrifugal pump type PK-80-015 230 V

    - medium: D / HEL
    - flow rate:
       - min: 11 ltr./min. at 30 mWs delivery height
       - max: 43 ltr./min at 5 mWs delivery height
    - suction height: up to 9 m
    - voltage: 230 V
    - current: 5,0 A
    - frequency: 50 Hz
    - electrical power: 0,6 kW
    - connection:
       - 1" on the suction side
       - 1" on the suction side
    - protection: IP 44
    - class F insulation
    - corrosion protection:
       - two-component coating in RAL 7032

  • Centrifugal pump type PK-80-016 400 V

    - medium: D / HEL
    - flow rate:
       - min: 11 ltr./min. at 30 mWs delivery height
       - max: 43 ltr./min at 5 mWs delivery height
    - suction height: up to 9 m
    - voltage: 400 V
    - current: 2,0 A
    - frequency: 50 Hz
    - electrical power: 0,6 kW
    - connection:
       - 1" on the suction side
       - 1" on the suction side
    - protection: IP 44
    - class F insulation
    - corrosion protection:
       - two-component coating in RAL 7032

  • Drip tray for centrifugal pump

    Drip tray for centrifugal pump for separate wall mounting

    Corrosion protection:

    • 2K paint in RAL 7032
  • Hand wing pump K1 3/4" 17 l/min

    - medium: D / HEL
    - flow rate:
       - max: ca. 17 ltr./min. at 10 m delivery height
    - suction height: 4 m
    - connection: 3/4" female thread
    - Corrosion protection:
       - two-component coating in RAL 7032
    - incl. wooden lever
    - suitable for liquids up to 80 °C

  • Drip tray for hand vane pump
    - for separate wall mounting
    - Corrosion protection K paint in RAL 7032
  • Drip tray for hand vane pump
    - for separate wall mounting
    - Corrosion protection K paint in RAL 7032
  • Drip tray for hand vane pump
    - for separate wall mounting
    - Corrosion protection K paint in RAL 7032
Special options

additional equipment

  • Suction pipe 1" flanged with foot valve
    - for tank height up to 2000mm
    - flanged
    - diameter: 160mm
    - 4-hole flange with welded 1" socket
    - seal
  • Suction pipe 2" flanged with foot valve

    - foot valve
    - flanged
    - diameter 160mm
    - 4-hole flange with welded bush 2?
    - seal
    - installed

  • Filling socket DN 50 45°
    - Filling tube closure bayonet closure G2
    - father coupling brass
    - Cap made of oil and weather resistant plastic
    - pressure waterproof up to 10 m water column
    - lockable with standard padlock
    - incl. green sign "fuel oil EL low sulfur" and red sign "also for fuel oil EL standard
    - Angle 2", 45° male thread/male thread
  • Filling nozzle DN 80 straight, flanged

    - Filling tube closure bayonet closure G2
    -father coupling brass
    - nut blind cap brass
    - lockable with standard padlock
    - Brass chain with stainless steel hook
    - Double nipple 3"
    - flange Ø240 mm

  • Krampitz Sealfix M 10 ml
    Krampitz Sealfix M
    • Dichtmittel
    • Schraubensicherung
    • 10 ml
Manual

* mandarory field

  • Manual by download
    After delivery you will receive an email with the links for download.
  • Manual by letter at the owner's expense
    The operating instructions, data sheets and certificates are available in paper form delivered by letter.
Price as configured:

Description

KTD-F-I-40-A-LO
Storage tank double-walled, I (indoor installation), 40 (40.000 ltr.), A (no coating inside)

- Material: mild steel S 235 JR
- double-walled, robust, cubic shape
- General Design Certificate: Z-38.12-312
- Volumen 100%: appr. 40.320 ltr.
- Volumen 95%: appr. 38.390 ltr.

Dimensions appr.:

- Length: 11.000 mm
- Width: 2.000 mm
- Overall width: 2.220 mm
- Height: 2.000 mm
- Overall height: 2.400 mm
- Weight: 6.660 kg

Standard equipment:

- Leackage detector static Type KÜR 5
- Dome entry DN 600
- Access steps inside the tank for revision  
- 5 Connection flanges DN 160 with flange adapters 
   - 5 flanges with 2 sockets, 2" each
- 4 x lifting lugs
- Floor assembly with continuous longitudinal beams and integrated forklift pockets
- Access ladder (access rungs mounted in one of the outer stiffening niches)
   - incl. 2x hand grip on the tank roof
- Nameplate
- Burst protection 115
- Dome cover DN 600
   - Material: Steel S235 JR
   - incl. washers, nuts
   - rubber square sealing profile 8 x 12mm, self-adhesive

Corrosion protection:

- inside: raw (not coated), oiled
- outside: coating L-A-1, RAL 7032

Documentation:

- Test documents in German or English, (by email or download)
- Test certificates
- General overview drawing
- Building inspectorate approval (Germany)
- Tank operating instructions
- Data Sheets / Operating Instructions for Accessories
- Certificates WHG and ISO 9001
- Additional documentation in paper form, on CD or by e-mail will be charged extra


Volume: 40000 ltr.
Medium: Diesel-biodiesel Lubricating oil
Place: Inside
Thermo-Iso: No
Earthquakes: No
Product weight: 6.660,00 Kg