day tank double wall - TTD-500-LO
Note: The illustrations may also contain accessories and special equipment which are not included in the standardscope of delivery because of example illustration.

Item no.: TTD-500-LO-01

TTD-500-LO
Double-walled day tank for supplying aggregates with fuel or lubricating oil.

- Material: steel S 235 JR
- Certified acc. German DIBT: Z-38.12-23
- Volume: 100% filling height approx.: 470 ltr
- Volume: 95% filling height approx.: 440 ltr

Standard dimension:

- Length: 1,510 mm
- Length total: 1,530 mm
- Width: 750 mm
- Width total: 775 mm
- Height: 505 mm
- Height total: 640 mm
- Weight: 186 kg (appr. without equipment, empty)

Category: Day tank double-walled (250 L - 1.950 L)

Prices visible after login
Available

Delivery status: 6-8 weeks

Mounting equipment
  • Feet (1 pair) for TTE/TTD-500/750/990

    Feet (1 pair) for TTE/TTD-500/750/990

    Material: steel S 235 JR
    2-C-Coating in RAL 7032
    Square pipe 100 x 100 x 3 mm
    Length: 750 mm
    Weight/Pair: 14kg

  • Column for TTE/TTD-500/750 H=500
    Column for TTE/TTD-500/750 H=500
  • Column for TTE/TTD-500/750 H=1000
    Column for TTE/TTD-500/750 H=1000
  • Column for TTE/TTD-500/750 H=1500
    Column for TTE/TTD-500/750 H=1500
  • Wall bracket for TTE/TTD-100/250/500
    Wall bracket for TTE/TTD-100/250/500
    Steel S 235 JRG2
    Length: 500 mm
    Weight/Pair: 12 kg
    (incl. reinforcement discs, welded on each day tank)
Color

* mandatory field

  • RAL-7032 "Pebble gray"
    Standard outside coating color. Other RAL colors are available for an added charge.
Sensors: Content display
  • Level Sensor
    Stabsonde LC-Vs (Schwimmer) 500 mm
    Ausgangssignal: 4-20 mA
    Tankhöhe: 500 mm
    • Reduzierung PE 2" auf 1.1/4"
    • Anschlussstecker M12
  • Level control module in percent 1K

    Analysis module for the recording of percentage values of the tank level

    - Display in percent
    - Configuration of up to 4 switching points
    - In addition a  4 - 20 mA sensor is required
    - The 4 - 20 mA signal can also be routed to other analysis modules
    - Not required for container with PLC

Sensors: Level indicator
  • Level sensor (float switch) (Bio-)Diesel

    - Output: Reed Contact
    - Switching function: 1 closer, falling level
    - Ambient temperature range: -5 ° C to + 70 ° C
    - Medium temperature: -5 ° C to + 70 ° C
    - with floater made of stainless steel
    - adjustable height 50 - 2.000 mm
    - cable length 5 m
    - dry run protection

  • Level sensor (float switch) (Bio-)Diesel

    - Output: Reed Contact
    - Switching function: 1 closer, falling level
    - Ambient temperature range: -5 ° C to + 70 ° C
    - Medium temperature: -5 ° C to + 70 ° C
    - with floater made of stainless steel
    - adjustable height 50 - 2.000 mm
    - cable length 5 m
    - dry run protection

  • Level sensor (float switch) (Bio-)Diesel

    - Output: Reed Contact
    - Switching function: 1 closer, falling level
    - Ambient temperature range: -5 ° C to + 70 ° C
    - Medium temperature: -5 ° C to + 70 ° C
    - with floater made of stainless steel
    - adjustable height 50 - 2.000 mm
    - cable length 5 m
    - dry run protection

  • Level indicator (float switch) lubricating oil/H?O
    - floater made of stainless steel
    - adjustable height 50 - 2.000 mm,
    - Cable length: 5,000 mm
    - for lubricating oil and water
    - T: max 40 ° C
    Only delivery!
  • 1-fold cable screw
    - Reducer G2" male - M16x1.5 female
    - Cable screw M16x1,5 AG PVC
    - 1x Sealing ring
    - Only delivery!
  • 2-fold cable screw

    - Red. "G2" AG
    - 2x M16 x 1.5 IG PE
    - 2x Cable gland M16x1.5 AG PVC
    - 1x seal ring 58 x 2,5 mm
    - Only delivery!

  • 4-fold cable screw

    - Red. "G2" AG
    - 4x M16 x 1.5 IG PE
    - 4x Cable gland M16x1.5 AG PVC
    - 1x seal ring 58 x 2,5 mm
    - 2x Seal plug
    - Only delivery!

Sensors: overfill protection

Equipment required under water law to limit the max. filling level when filled by a tanker or using fixed piping.

  • limiting level transmitter Type GWG 12-K1
    - only for diesel / heating oil with CE-mark
    - with 1,5 m cable
    - Reduction 2" x 1" (AG/IG)
    - Mandatory for tanks with a volume of 1000 litres or more
  • Overfill prevention Type 76 A

    Overfill prevention Sensor

    - Type 76 A, Sensor length 200 mm
    - Connection: G 3/4" male
    Only delivery!
  • Level Limiter Type: NB 220 H

    Level Limiter Type: NB 220 H

    - with potential free changer
    - Supply: 230 V, 50 Hz
    - not to be mounted directly on the tank for media such as kerosene or bioethanol

    Only delivery!
  • Overfill protection confirmation box

    - Mounting plate
    - Voltage 24 V/DC
    - Housing protection grade IP 54
    - switch-off-electronic
    - Receipt key
    - Flash light 1 Joule
    - Horn 95 Decibel
    - Road tanker connection 907-Z
    - not to be mounted directly on the tank for media such as kerosene or bioethanol

    Only Delivery!
Sensors: Tank heating

Plant equipment for reliable prevention of paraffin excretion of the fuel at falling temperatures and maintenance of the pump and nozzle viscosity of the oil in the intake area (frost-free from 8°C to 12°C).

  • Tank heating system for diesel (Kl. A III)
    Tank heating system for diesel (Kl. A III) - Power: 220 Watt - Voltage: 230 V, 50 Hz
  • Magnetic fixing for tank heating
    Magnetic fixing for tank heating
    consisting of:
    - 2x magnet 42mm x 9mm
    - 2x pipe clamp 40mm - 45mm
    - 2x countersunk screw and nut M6
Pumps

Z-PK is a combination of a hand vane pump and a centrifugal pump in one housing. In the event of a complete network failure, refilling of the day tank is also ensured manually with the hand vane pump.

  • Pump set 230 V

    Pumpenkombination für Heizöl und Diesel

    bestehend aus:

    • 1x Kreiselpumpe
    • Förderleistung: 5 bis 50 ltr./min.
    • 1x Handflügelpumpe
    • Förderleistung: 15 ltr./min.
    • Tropfwanne Typ Z-PK-2100
    • Korrosionsschutz
    • Nicht montiert, nur geliefert!
  • Pump set 400 V

    - Medium: diesel / heating oil
    - 1x centrifugal pump:
       - Delivery rate: 5 to 50 ltr./min.
       -Pumping height: 46 to 10 m Fl.s.
       -Pumping pressure: 3 bar
       -setting pressure: 3 bar
       -Suction height: 6 m
       -voltage: 400 V
       -current consumption: 2.0 A
       -frequency: 50 Hz
       -Electric power: 0.6 kW
       -speed: 2,900 rpm
    - 1x hand wing pump:
       - delivery rate: 15 ltr./min.
       - delivery head: approx. 10 m Fl.s.
       - suction height: 4 m
    - 1x twin pump body:
       - 4 pieces mounting holes
       - diameter: 11 mm
       - Two inlets DN 25 / 1" on the suction side
       - Outlet on the pressure side DN 20 / 3/4
       - Connection internal thread for:
       - 2 ball valves 1" for suction side
       - 1 ball valve 3/4" for pressure side
       - 1x drip tray
       - completely assembled and piped on console
    - Corrosion protection 2-component paint in RAL 7032

    Not assembled, only delivered!

  • Centrifugal pump Type PK-80-015

    Kreiselpumpe

    • Fördermenge:
    • 43 ltr./min. bei 5 m FLS
    • 11 ltr./min. bei 30 m FLS
    • Förderhöhe: 46 - 10 mWs
    • Spannung: 230 V
    • Motorleistung: 0,55 kW
    • Nennstrom: 5 A
    • Motorschutzart: IP 44
    • Korrosionsschutz
  • Centrifugal pump 43-11 ltr., 400 V

    Centrifugal pump

    • Flow rate:
      • 43 ltr./min. at 5 m FLS
      • 11 ltr./min. at 30 m FLS
    • Voltage: 400 V
    • Electrical power: 0,6 kW
    • Rated current: 2 A
    • Connections:
      • suction line: 1"
      • pressure line: 1"
    • Weight: 10,8 kg
  • Drip tray for centrifugal pump

    Drip tray for centrifugal pump for separate wall mounting

    Corrosion protection:

    • 2K paint in RAL 7032
  • Drip tray for hand vane pump
    - for separate wall mounting
    - Corrosion protection K paint in RAL 7032
  • Drip tray for hand vane pump
    - for separate wall mounting
    - Corrosion protection K paint in RAL 7032
  • Drip tray for hand vane pump
    - for separate wall mounting
    - Corrosion protection K paint in RAL 7032
  • Hand crank pump
    - Material: aluminium
    - Connection: 1".
    - Delivery rate: 100 ltr/min
    - Delivery head approx.: 10 m
    - Suction height approx.: 4 m
    - Corrosion protection: 2-component paint in RAL 7032
    - No documentation available!
Special options

additional equipment

  • Filling socket DN 50 45°

    Filling socket DN 50

    - filling pipe closure 2" x 2 1/2"
    - 1 x angle 2", 45° female
  • Suction pipe 1" flanged with foot valve 500 mm
    - for tank height 500mm
    - flanged Ø 160mm
    - 4-hole flange with welded 1" socket
    - Seal
  • Fassstecker mit Köcher 3/4"
    - Barrel plug 3/4"
    - Quiver 2"
    - Suction hose 3/4"
    - Length 3000 mm
  • Suction connection for barrel, 1? with quiver
    - Barrel plug 1"
    - Quiver 2"
    - suction hose 1"
    - length 3000 mm
Manual

Manual by letter at the owner's expense

  • Manual by letter at the owner's expense
    The operating instructions, data sheets and certificates are available in paper form delivered by letter.
Price as configured:

Description

TTD-500-LO
Double-walled day tank for supplying aggregates with fuel or lubricating oil.

- Material: steel S 235 JR
- Certified acc. German DIBT: Z-38.12-23
- Volume: 100% filling height approx.: 470 ltr
- Volume: 95% filling height approx.: 440 ltr

Standard dimension:

- Length: 1,510 mm
- Length total: 1,530 mm
- Width: 750 mm
- Width total: 775 mm
- Height: 505 mm
- Height total: 640 mm
- Weight: 186 kg (appr. without equipment, empty)

Standard Equipment

1x AM-595 Burst protection Ø 115 mm
1x AM-S-380-002 Maintenance opening 380 x 440 mm
1x AM-002 Float level control MT Profil
1x AM-359 Vacuum meter static Type KÜR 5
1x F-MS-38-016 Ball valve 3/8" IG/AG wing
1x AM-090 Type plate
6x AM-948 Dust cover 2 "yellow conical
4x AM-941 Blanking plug 2" screwable PE with seal
1x AM-960-21P Reduction 2 "x 3/4" PE black, Krampitz
1x AM-960-22P Reduction 2 "x 1" PE black, Krampitz
1x AM-911 Ventilation nozzle DN 50 250mm
1x BE2 Manual by download

Basic package:
- Maintenance opening 380 x 440 mm
- Connection on top: 6x 2"
- Connection on top: 1x flange Ø160 mm, 1" socket
- Connection on the side top: 1x 2"
- Connection on top: 1x 3/8" vacuum connection
- Connection on top: 1x ½" Vacuum leak detector

Corrosion protection:

- inside: raw, oiled
- outside: coating L-A-1, RAL 7032

Documentation:

- Test documents in German (Sending by mail)
- Test certificate
- Overview drawing
- Building inspection approval
- Operating Instructions Tank
- Datasheets / Operating Instructions for accessories
- Certificates WHG and ISO 9001
- additional documentation in Paper, on CD or by mail will be charged extra
Volume: 500 ltr.
Type: Daytank
Place: Inside
Material: Steel
Wall Design: double walled
Level: Level 2
Medium: Lubricating oil

PDF-Documents

TTE/TTD Equipment Wand Bracket WK, Foot FS, Stand Column ST

PDF
TTE/TTD Equipment Wand Bracket WK, Foot FS, Stand Column ST

TTD Day Tank Double Wall

PDF
TTD Day Tank Double Wall

TTD-A4 Day Tank Double Wall

PDF
TTD-A4 Day Tank Double Wall

TTD-S/A4 Day Tank Double Wall

PDF
TTD-S/A4 Day Tank Double Wall