day tank double wall - TTD-750-GA

Item number: TTD-750-GA-01

  • Material: steel S235 JR
  • Approval: Z-38.12-23
  • Volume 100%: 730 ltr.
  • Volume 95%: 700 ltr.
  • Medium: gasoline
Dimensions:
  • Length: 1.510 mm
  • Length total: 1.530 mm
  • Width: 750 mm
  • Height: 755 mm
  • Height overall: 880 mm
  • Weight: 248 kg

Category: See all


Prices visible after login
Available

Delivery status: 10-12 weeks



Mounting equipment
  • Feet (1 pair) for TTE/TTD-500/750/990

    Feet (1 pair) for TTE/TTD-500/750/990

    Material: steel S 235 JR
    2-C-Coating in RAL 7032
    Square pipe 100 x 100 x 3 mm
    Length: 750 mm
    Weight/Pair: 14kg

  • Column for TTE/TTD-500/750 H=500
    Column for TTE/TTD-500/750 H=500
  • Column for TTE/TTD-500/750 H=1000
    Column for TTE/TTD-500/750 H=1000
  • Column for TTE/TTD-500/750 H=1500
    Column for TTE/TTD-500/750 H=1500
  • Wall bracket for TTE/TTD-750/990
    Wall bracket for TTE/TTD-750/990
    Steel S 235 JRG2
    Length: 750 mm
    Weight/Pair: 18 kg
    (incl. reinforcement discs, welded on each day tank)
Packing flat

The stated packaging flat rate applies exclusively to standard packaging and exclusively to truck transport. Seaworthy packaging will be charged separately.

  • without flat-rate packaging fee for exclusive delivery of accessories
  • Packing flat rate tank
    Please only deselect if no tank is ordered!
Color

* mandatory field

  • RAL-7032 "Pebble gray"
    Standard outside coating color. Other RAL colors are available for an added charge.
tank equipment

EX equipment package

  • deflagration arrester 1" IG, MS, ISO16852
    Deflagration tube safety device 1" IG, MS, ISO16852
    - for the removal of the medium
  • deflagration arrester 2" AG/IG, MS, ISO16852
    Deflagration tube safety device 1" IG, MS, ISO16852
    - for filling with one medium
  • deflagration pressure vacuum Vent G2"
    The pressure vacuum vent is normally used in the vapour recovery system (Stage 1). It is designed to regulate the pressure inside the storage tank and to protect it in case of overpressure. It even helps to reduce the evaporation of fuel and environmental pollution. Flame arrester element is designed to isolate flames and protect the tank from tramsission of flames.
Fitting

Fittings permanently installed and required on the tank.

Sensors: Content display
  • Level Sensor
    Stabsonde LC-Vs (Schwimmer) 750 mm
    Ausgangssignal: 4-20 mA
    Tankhöhe: 750 mm
    • Reduzierung PE 2" auf 1.1/4"
    • Anschlussstecker M12
  • Pressure transducer Type AUR LC-Vs
    • Pressure transducer Type AUR LC-Vs
    • Output signal 4-20 mA
  • Level control module in percent 1K

    Analysis module for the recording of percentage values of the tank level.

    • Display in percent
    • Configuration of up to 4 switching points
    • In addition a  4 - 20 mA sensor is required
    • The 4 - 20 mA signal can also be routed to other analysis modules
    • Not required for container with PLC
Sensors: Level transmitter - Float switch

The level transmitter is usually used for the automatic request or switching off of pumps in the event of a signal from specified level points (underflow or overflow) in tanks.

  • Level switch EX
    Level transmitter (float switch) Reed
    • control mini float switch EX
    • made of stainless steel
    • Cable length 2 m-normally open
    • Cable material PVC shielded
    • Temperature -30°C to + 45°C
    • Dry-run protection
  • Level switch EX
    Level transmitter (float switch) Reed
    • control mini float switch EX
    • made of stainless steel
    • Cable length 2 m-normally open
    • Cable material PVC shielded
    • Temperature -30°C to + 45°C
    • Dry-run protection
  • Level switch EX
    Level transmitter (float switch) Reed
    • control mini float switch EX
    • made of stainless steel
    • Cable length 2 m-normally open
    • Cable material PVC shielded
    • Temperature -30°C to + 45°C
    • Dry-run protection
  • 1-fold cable gland 2" MS EX
    1x cable screw consists of: - Reduction 2"x 1" AI Ms - red. G1" male - M16x1.5 female - CEAG Ex Leitungseinführung M16x1,5 GHG9601955R0022
  • 1-fold cable gland 2" MS EX
    1x cable screw consists of: - Reduction 2"x 1" AI Ms - red. G1" male - M16x1.5 female - CEAG Ex Leitungseinführung M16x1,5 GHG9601955R0022
  • 1-fold cable gland 2" MS EX
    1x cable screw consists of: - Reduction 2"x 1" AI Ms - red. G1" male - M16x1.5 female - CEAG Ex Leitungseinführung M16x1,5 GHG9601955R0022
Sensors: overfill protection

Equipment required under water law to limit the max. filling level when filled by a tanker or using fixed piping.

  • Level Limiter Ex's fuel
    GWG 81-D-Ex 200 W Grenzwertgeber EX 
    • Edelstahl
    • incl. Wandarmatur 907-W
    • Sondenlänge 200 mm
    • Ansprechhöhe einstellbar
    • Anschlußgewinde: G 1" AG Messing
    • incl. GWG-Armatur W für Wandmontage
    • GWG-Armatur: Beipack, Montage und Anschluß erfolgt
  • Overfill protection EX
    Overfill protection EX
    • 1 per EX tank chamber
Special options

additional equipment

  • Filling socket DN 50

    Filling socket DN 50

    - consists:
    Filling tube closure K,2"
    Angle 45 °, 2 "AG / AG

  • Filling pipe 2"

    Filling pipe 2"

    - Material: steel
    - screwed
  • Vorbereitung für Rücklauf
    Für einen installierten Rücklauf muss auch die Deflagrationsrohrsicherung 1" IG, MS, ISO16852 verwendet werden!
  • deflagration arrester 1" IG, MS, ISO16852
    Deflagration tube safety device 1" IG, MS, ISO16852
    - for the removal of the medium
  • Krampitz Sealfix M 10 ml
    Krampitz Sealfix M
    • Dichtmittel
    • Schraubensicherung
    • 10 ml
Manual

* mandarory field

  • Manual by download
    After delivery you will receive an email with the links for download.
  • Manual by letter at the owner's expense
    Die Bedienungsanleitungen, Datenblätter und Zertifikate werden Ihnen in Papierform per Brief zugestellt.
Your configuration



Description

TTD-750-GA day tank, double-walled
  • Material: steel S235 JR
  • Approval: Z-38.12-23
  • Volume 100%: 730 ltr.
  • Volume 95%: 700 ltr.
  • Medium: gasoline
Dimensions:
  • Length: 1.510 mm
  • Length total: 1.530 mm
  • Width: 750 mm
  • Height: 755 mm
  • Height overall: 880 mm
  • Weight: 248 kg

Base package
consists of:

1x AM-596
Flange 240 mm for hand hole 115 mm

  • Lower flange 240 mm - 115 mm
    • incl. 8 x welding studs M 8 x 20
    • incl. 8 x washers M 8
    • incl. 8 x cap nuts M 8
  • Seal

Caution:
Rupture disc flange replaced. A suitable pressure-relief device is required!

1x AM-002
Float level control typ MT Profil R
universally adjustable, with interchangeable
scale (0 - 150 cm or 0 - 250 cm)
Connection: 1.1/2" AG incl. Red. 2" x 1.1/2"

1x F-KU-2-001
Fitting nipple 2"x1.1/2" AG/IG PVC long

1x F-MS-38-016
Ball valve type 510, PN 16, 3/8"

1x AM-090
Type plate

7x AM-948
Blind plug 2" yellow conical

1x AM-947
Blind plug 1" yellow, screwable

1x AM-359
Vacuum meter static Type KÜR 5

  • Z-65.22-158, Connection 1/2"AG
  • Radial connector (bottom)

Volume: 750 ltr.
Type: Daytank
Place: Inside
Material: Steel
Medium: Gasoline
Wall Design: double walled
Level: Level 2

PDF-Documents

TTE/TTD Equipment Wand Bracket WK, Foot FS, Stand Column ST

TTD Day Tank Double Wall

TTD-A4 Day Tank Double Wall

TTD-S/A4 Day Tank Double Wall


This product consists of
Float level control MT Profil

1 x Float level control MT Profil

Prices visible after login
Vacuum meter static Type KÜR 5

1 x Vacuum meter static Type KÜR 5

Prices visible after login