day tank single wall - TTE-100-DB

Item no.: TTE-100-DB-01

TTE-100-D
Single-walled day tank for supplying aggregates with fuel or lubricating oil.

- Material: steel S 235 JR
- Certified acc. German DIBT: Z-38.11-127
- Volume: 100% filling height approx.: 106 ltr
- Volume: 95% filling height approx.: 100 ltr

Standard dimension:

- Length: 510 mm
- Length total: 550 mm
- Width: 500 mm
- Width total: 525 mm
- Height: 500 mm
- Height total: 530 mm
- Weight: 38 kg (appr. without equipment, empty)

Category: day tank single-walled (100 ltr. - 1,950 ltr.)


Prices visible after login
Available

Delivery status: 6-8 weeks



Security concept

Protection against fuel leakage with leak monitoring for single-walled tanks. If there is no catchment room, a oil trap must be used.

  • Oil trap single-walled for TTE-100

    TW-100 Sump tray for TTE-100

    - Material: Steel S 235 JR
    - Allg. bauaufs. Approval: Z-38.11-86
    - Volume 100%: 130 ltr.

    Dimensions:

    - length: 510 mm
    - total length: 670 mm
    - width: 500 mm
    - total width: 660 mm
    - height: 500 mm
    - total height: 700 mm
    - Weight: 55 kg

  • Typ Oil detector OM 5 incl. Evaluation unit
    Oil warning probe type OM 5 incl. Evaluation unit

    - For storage rooms, dome shafts, drip pans, double-walled tanks
    - With visual / audible alarm, test / acknowledge button and relay output
    - Probe self-monitoring
    - max. 5 probes can be connected

  • Meßsonde für OM5
Mounting equipment
  • Feet (1 pair) for TTE/TTD-50/100/250

    Feet (1 pair) for TTE/TTD-50/100/250

    Material: steel S 235 JR
    2-C-Coating in RAL 7032
    Square pipe 100 x 100 x 3 mm
    Length: 500 mm
    Weight/Pair: 9kg

  • Column for TTE/TTD-50/100 H=500
    Column for TTE/TTD-50/100 H=500
    Material: Steel S235 JRG2
    2-C Coating in RAL like tank
    Height: 500 mm
    Width: 500 mm
    Length: 500 mm
    Weight: 30 kg
  • Column for TTE/TTD-50/100 H=1000
    Column for TTE/TTD-50/100 H=1000
    Material: Steel S235 JRG2
    2-C Coating in RAL like tank
    Height: 1.000 mm
    Width: 500 mm
    Length: 500 mm
    Weight: 34 kg
  • Column for TTE/TTD-50/100 H=1500
    Column for TTE/TTD-50/100 H=1500
    Material: Steel S235 JRG2
    2-C Coating in RAL like tank
    Height: 1.500 mm
    Width: 500 mm
    Length: 500 mm
    Weight: 38 kg
  • Wall bracket for TTE/TTD-100/250/500
    Wall bracket for TTE/TTD-100/250/500
    Steel S 235 JRG2
    Length: 500 mm
    Weight/Pair: 12 kg
    (incl. reinforcement discs, welded on each day tank)
Color

* mandatory field

  • RAL-7032 "Pebble gray"
    Standard outside coating color. Other RAL colors are available for an added charge.
Sensors: Content display
  • Level Sensor
    Stabsonde LC-Vs (Schwimmer) 500 mm
    Ausgangssignal: 4-20 mA
    Tankhöhe: 500 mm
    • Reduzierung PE 2" auf 1.1/4"
    • Anschlussstecker M12
  • Level control module in percent 1K

    Analysis module for the recording of percentage values of the tank level

    - Display in percent
    - Configuration of up to 4 switching points
    - In addition a  4 - 20 mA sensor is required
    - The 4 - 20 mA signal can also be routed to other analysis modules
    - Not required for container with PLC

Sensors: Level indicator
  • Level sensor (float switch)  (Bio-)Diesel

    - Output: Reed Contact
    - Switching function: 1 closer, falling level
    - Ambient temperature range: -5 C to + 70 C
    - Medium temperature: -5 C to + 70 C
    - with floater made of stainless steel
    - adjustable height 50 - 2.000 mm
    - cable length 5 m
    - dry run protection

  • Level sensor (float switch)  (Bio-)Diesel

    - Output: Reed Contact
    - Switching function: 1 closer, falling level
    - Ambient temperature range: -5 C to + 70 C
    - Medium temperature: -5 C to + 70 C
    - with floater made of stainless steel
    - adjustable height 50 - 2.000 mm
    - cable length 5 m
    - dry run protection

  • Level sensor (float switch)  (Bio-)Diesel

    - Output: Reed Contact
    - Switching function: 1 closer, falling level
    - Ambient temperature range: -5 C to + 70 C
    - Medium temperature: -5 C to + 70 C
    - with floater made of stainless steel
    - adjustable height 50 - 2.000 mm
    - cable length 5 m
    - dry run protection

  • Level indicator (float switch) lubricating oil/H?O
    - floater made of stainless steel
    - adjustable height 50 - 2.000 mm,
    - Cable length: 5,000 mm
    - for lubricating oil and water
    - T: max 40 C
    Only delivery!
  • 1-fold cable screw
    - Reducer G2" male - M16x1.5 female
    - Cable screw M16x1,5 AG PVC
    - 1x Sealing ring
    - Only delivery!
  • 2-fold cable screw

    - Red. "G2" AG
    - 2x M16 x 1.5 IG PE
    - 2x Cable gland M16x1.5 AG PVC
    - 1x seal ring 58 x 2,5 mm
    - Only delivery!

  • 4-fold cable screw

    - Red. "G2" AG
    - 4x M16 x 1.5 IG PE
    - 4x Cable gland M16x1.5 AG PVC
    - 1x seal ring 58 x 2,5 mm
    - 2x Seal plug
    - Only delivery!

Sensors: overfill protection

Equipment required under water law to limit the max. filling level when filled by a tanker or using fixed piping.

  • limiting level transmitter Type GWG 12-K1
    - only for diesel / heating oil with CE-mark
    - with 1,5 m cable
    - Reduction 2" x 1" (AG/IG)
    - Mandatory for tanks with a volume of 1000 litres or more
  • Overfill prevention Type 76 A

    Overfill prevention Sensor

    - Type 76 A, Sensor length 200 mm
    - Connection: G 3/4" male
    Only delivery!
  • Level Limiter Type: NB 220 H

    Level Limiter Type: NB 220 H

    - with potential free changer
    - Supply: 230 V, 50 Hz
    - not to be mounted directly on the tank for media such as kerosene or bioethanol

    Only delivery!
  • Overfill protection confirmation box

    - Mounting plate
    - Voltage 24 V/DC
    - Housing protection grade IP 54
    - switch-off-electronic
    - Receipt key
    - Flash light 1 Joule
    - Horn 95 Decibel
    - Road tanker connection 907-Z
    - not to be mounted directly on the tank for media such as kerosene or bioethanol

    Only Delivery!
Pumps

Z-PK is a combination of a hand vane pump and a centrifugal pump in one housing. In the event of a complete network failure, refilling of the day tank is also ensured manually with the hand vane pump.

  • Pump set 230 V

    Pumpenkombination für Heizöl und Diesel

    bestehend aus:

    • 1x Kreiselpumpe
    • Förderleistung: 5 bis 50 ltr./min.
    • 1x Handflügelpumpe
    • Förderleistung: 15 ltr./min.
    • Tropfwanne Typ Z-PK-2100
    • Korrosionsschutz
    • Nicht montiert, nur geliefert!
  • Pump set 400 V

    - Medium: diesel / heating oil
    - 1x centrifugal pump:
       - Delivery rate: 5 to 50 ltr./min.
       -Pumping height: 46 to 10 m Fl.s.
       -Pumping pressure: 3 bar
       -setting pressure: 3 bar
       -Suction height: 6 m
       -voltage: 400 V
       -current consumption: 2.0 A
       -frequency: 50 Hz
       -Electric power: 0.6 kW
       -speed: 2,900 rpm
    - 1x hand wing pump:
       - delivery rate: 15 ltr./min.
       - delivery head: approx. 10 m Fl.s.
       - suction height: 4 m
    - 1x twin pump body:
       - 4 pieces mounting holes
       - diameter: 11 mm
       - Two inlets DN 25 / 1" on the suction side
       - Outlet on the pressure side DN 20 / 3/4
       - Connection internal thread for:
       - 2 ball valves 1" for suction side
       - 1 ball valve 3/4" for pressure side
       - 1x drip tray
       - completely assembled and piped on console
    - Corrosion protection 2-component paint in RAL 7032

    Not assembled, only delivered!

  • Centrifugal pump Type PK-80-015

    Kreiselpumpe

    • Fördermenge:
    • 43 ltr./min. bei 5 m FLS
    • 11 ltr./min. bei 30 m FLS
    • Förderhöhe: 46 - 10 mWs
    • Spannung: 230 V
    • Motorleistung: 0,55 kW
    • Nennstrom: 5 A
    • Motorschutzart: IP 44
    • Korrosionsschutz
  • Centrifugal pump 43-11 ltr., 400 V

    Centrifugal pump

    • Flow rate:
      • 43 ltr./min. at 5 m FLS
      • 11 ltr./min. at 30 m FLS
    • Voltage: 400 V
    • Electrical power: 0,6 kW
    • Rated current: 2 A
    • Connections:
      • suction line: 1"
      • pressure line: 1"
    • Weight: 10,8 kg
  • Drip tray for centrifugal pump

    Drip tray for centrifugal pump for separate wall mounting

    Corrosion protection:

    • 2K paint in RAL 7032
  • Hand vane pump K1 3/4" 14 ltr/min

    - Material: cast iron
    - incl. wooden lever
    - Weight: 6,2 kg
    - Connection: 3/4"
    - Flow: 15 ltr/min
    - Flow height: 10 m
    - Suction height: 4 m
    - Corrosion protection: 2-C-coating in RAL 7032

  • Drip tray for hand vane pump
    - for separate wall mounting
    - Corrosion protection K paint in RAL 7032
  • Drip tray for hand vane pump
    - for separate wall mounting
    - Corrosion protection K paint in RAL 7032
  • Drip tray for hand vane pump
    - for separate wall mounting
    - Corrosion protection K paint in RAL 7032
  • Hand crank pump
    - Material: aluminium
    - Connection: 1".
    - Delivery rate: 100 ltr/min
    - Delivery head approx.: 10 m
    - Suction height approx.: 4 m
    - Corrosion protection: 2-component paint in RAL 7032
    - No documentation available!
Special options

additional equipment

  • Filling socket DN 50 45°

    Filling socket DN 50

    - filling pipe closure 2" x 2 1/2"
    - 1 x angle 2", 45 female
  • Fassstecker mit Köcher 3/4"
    - Barrel plug 3/4"
    - Quiver 2"
    - Suction hose 3/4"
    - Length 3000 mm
  • Suction connection for barrel, 1? with quiver
    - Barrel plug 1"
    - Quiver 2"
    - suction hose 1"
    - length 3000 mm
Manual

Manual by letter at the owner's expense

  • Manual by letter at the owner's expense
    The operating instructions, data sheets and certificates are available in paper form delivered by letter.
Price as configured:

Description

TTE-100-D
Single-walled day tank for supplying aggregates with fuel or lubricating oil.

- Material: steel S 235 JR
- Certified acc. German DIBT: Z-38.11-127
- Volume: 100% filling height approx.: 106 ltr
- Volume: 95% filling height approx.: 100 ltr

Standard dimension:

- Length: 510 mm
- Length total: 550 mm
- Width: 500 mm
- Width total: 525 mm
- Height: 500 mm
- Height total: 530 mm
- Weight: 38 kg (appr. without equipment, empty)

Standard Equipment

1x AM-595 Burst protection 115 mm
1x AM-004.1 Mechanical level indicator D/HEL
1x AM-090 Type plate
8x AM-948 Dust cover 2 "yellow conical
4x AM-941 Blanking plug 2" screwable PE with seal
2x AM-960-21P Reduction 2 "x 3/4" PE black, Krampitz
2x AM-960-22P Reduction 2 "x 1" PE black, Krampitz
1x F-MS-34-031 Ball valve 3/4", DN 20, IA thread
1x F-MS-34-038 Bracket 90, IA, 3/4", Brass
1x F-MS-12-018 KFE ball valve 1/2"
1x AM-911 Ventilation nozzle DN 50 250mm
1x V-10-001 Krampitz Sealfix M 10 ml
1x BE2 Manual by download

Basic package:
- Connection on top: 6x 2"
- Connection on the side top: 2x 2" (right/left)
- Bottom connection: 1x 3/4" flow / 1x 1/2" residual discharge

Corrosion protection:

- inside: raw, oiled
- outside: coating L-A-1, RAL 7032

Documentation:
- Test documents in German (Sending by mail)
- Test certificate
- Overview drawing
- Building inspection approval
- Operating Instructions Tank
- Datasheets / Operating Instructions for accessories
- Certificates WHG and ISO 9001
- additional documentation in Paper, on CD or by mail will be charged extra


Volume: 100 ltr.
Type: Daytank
Medium: Diesel-biodiesel
Place: Inside
Wall Design: single walled
Material: Steel
Level: Level 1

PDF-Documents

TTE/TTD Equipment Wand Bracket WK, Foot FS, Stand Column ST

TTE Day Tank Single Wall

TW Tank-Catch Sump

TW-A4 Tank-Catch Sump