day tank single wall - TTE-100-LO

Item number: TTE-100-LO-01

  • Material: steel S 235 JR
  • General type approval: Z-38.11-86
  • Volume total: 106 ltr.
  • Volume 95%: 100 ltr.
  • Medium: lubricating oil
Dimensions:
  • Length: 510 mm
  • Length total: 546 mm
  • Width: 500 mm
  • Height: 500 mm
  • Height total: 533 mm
  • Weight: 49 kg

Category: See all


Prices visible after login
Available

Delivery status: 10-12 weeks



Security concept

Protection against fuel leakage with leak monitoring for single-walled tanks. If there is no catchment room, a oil trap must be used.

  • Oil trap single-walled for TTE-100
    TW-100 drip tray for TTE-100

    • Material: Steel S 235 JR
    • Gen. bauaufs. Approval: Z-38.11-86
    • Volume 100%: 130 ltr.
    Dimensions:

    • Length: 510 mm
    • Total length: 670 mm
    • Width: 500 mm
    • Total width: 660 mm
    • Height: 500 mm
    • Total height: 700 mm
    • Weight: 55 kg
  • Packaging flat rate sump tray
    The stated packaging flat rate applies exclusively to standard packaging and exclusively to truck transport. Seaworthy packaging will be charged separately.
  • Typ Oil detector OM 5 incl. Evaluation unit
    Oil warning probe type OM 5 incl. Evaluation unit
    • For storage rooms, dome shafts, drip pans, double-walled tanks
    • With visual / audible alarm, test / acknowledge button and relay output
    • Probe self-monitoring
Mounting equipment
  • Feet (1 pair) for TTE/TTD-50/100/250

    Feet (1 pair) for TTE/TTD-50/100/250

    Material: steel S 235 JR
    2-C-Coating in RAL 7032
    Square pipe 100 x 100 x 3 mm
    Length: 500 mm
    Weight/Pair: 9kg

  • Column for TTE/TTD-50/100 H=500
    Column for TTE/TTD-50/100 H=500
    Material: Steel S235 JRG2
    2-C Coating in RAL like tank
    Height: 500 mm
    Width: 500 mm
    Length: 500 mm
    Weight: 30 kg
  • Column for TTE/TTD-50/100 H=1000
    Column for TTE/TTD-50/100 H=1000
    Material: Steel S235 JRG2
    2-C Coating in RAL like tank
    Height: 1.000 mm
    Width: 500 mm
    Length: 500 mm
    Weight: 34 kg
  • Column for TTE/TTD-50/100 H=1500
    Column for TTE/TTD-50/100 H=1500
    Material: Steel S235 JRG2
    2-C Coating in RAL like tank
    Height: 1.500 mm
    Width: 500 mm
    Length: 500 mm
    Weight: 38 kg
  • Wall bracket for TTE/TTD-100/250/500
    Wall bracket for TTE/TTD-100/250/500
    Steel S 235 JRG2
    Length: 500 mm
    Weight/Pair: 12 kg
    (incl. reinforcement discs, welded on each day tank)
Packing flat

The stated packaging flat rate applies exclusively to standard packaging and exclusively to truck transport. Seaworthy packaging will be charged separately.

  • without flat-rate packaging fee for exclusive delivery of accessories
  • Packing flat rate tank
    Please only deselect if no tank is ordered!
Color

* mandatory field

  • RAL-7032 "Pebble gray"
    Standard outside coating color. Other RAL colors are available for an added charge.
Standard fittings and valves

Fittings and fittings permanently installed and required on the tank.

  • Blanking plug 2" screwable PE with seal
    Blanking plug 2" screwable PE with seal
  • Reduction 2 "x 1" PE black, Krampitz
    Reduction 2 "x 1" PE black, Krampitz Attention! Only suitable for electronic components, not for media-carrying cables!
  • Reduction 2 "x 3/4" PE black, Krampitz
    Reducer 2 "x 3/4" PE black, with sealing rubber Krampitz Attention! Only suitable for electronic components, not for media-carrying cables!
  • Bracket 90°, IA, 3/4", Brass
    bracket for floor outlet
    - Pivotable to connect ball valve
  • Ball valve 3/4", DN 20, IA thread

    Ball valve, 3/4", DN 20, inside outside thread
    PN 40 wing handle with type 98
    and screw-in connection

  • KFE ball valve 1/2"
    KFE ball valve 1/2"
    for residue outlet
  • Ventilation socket DN 50 with cap
    Ventilation socket DN 50 with cap
    - Ventilation cap 2" female
    - Ventilation pipe 2" x 250 mm
    - height: 250mm
Sensors: Content display
  • Level Sensor
    Stabsonde LC-Vs (Schwimmer) 500 mm
    Ausgangssignal: 4-20 mA
    Tankhöhe: 500 mm
    • Reduzierung PE 2" auf 1.1/4"
    • Anschlussstecker M12
  • Pressure transducer Type AUR LC-Vs
    • Pressure transducer Type AUR LC-Vs
    • Output signal 4-20 mA
  • Level control module in percent 1K

    Analysis module for the recording of percentage values of the tank level.

    • Display in percent
    • Configuration of up to 4 switching points
    • In addition a  4 - 20 mA sensor is required
    • The 4 - 20 mA signal can also be routed to other analysis modules
    • Not required for container with PLC
Sensors: Level indicator
  • Level sensor (float switch)

    Level sensor (float switch) diesel / heating oil

    • Output: Reed Contact
    • Switching function: 1 closer, falling level
    • Ambient temperature range: -5 ° C to + 70 ° C
    • Medium temperature: -5 ° C to + 70 ° C
    • with floater made of stainless steel
    • adjustable height 50 - 2.000 mm
    • cable length 5 m
    • dry run protection
  • Level sensor (float switch)

    Level sensor (float switch) diesel / heating oil

    • Output: Reed Contact
    • Switching function: 1 closer, falling level
    • Ambient temperature range: -5 ° C to + 70 ° C
    • Medium temperature: -5 ° C to + 70 ° C
    • with floater made of stainless steel
    • adjustable height 50 - 2.000 mm
    • cable length 5 m
    • dry run protection
  • Level sensor (float switch)

    Level sensor (float switch) diesel / heating oil

    • Output: Reed Contact
    • Switching function: 1 closer, falling level
    • Ambient temperature range: -5 ° C to + 70 ° C
    • Medium temperature: -5 ° C to + 70 ° C
    • with floater made of stainless steel
    • adjustable height 50 - 2.000 mm
    • cable length 5 m
    • dry run protection
  • 1-fold cable screw

    1-fach Kabelverschraubung 2" PE mit Dichtung

  • 2-fold cable screw

    2-fach Kabelverschraubung 2" PE mit Dichtung

  • 4-fold cable screw
    4-fach Kabelverschraubung 2" PE mit Dichtung
Sensors: overfill protection

Equipment required under water law to limit the max. filling level when filled by a tanker or using fixed piping.

  • limiting level transmitter Type GWG 12-K1
    Limit value transmitter Type GWG 12-K1
    • for diesel / heating oil only
    • with 1,5 m cable and 2" / 1" reducer (OT/IT)
  • Level Limiter Type: NB 220 H

    Level Limiter Type: NB 220 H

    • with potential free changer
    • Supply: 230 V, 50 Hz
    • not to be mounted directly on the tank for media such as kerosene or bioethanol
    Only delivery!
  • Overfill prevention, Sensor length 200 mmType 76 A, 200 mm
    Overfill prevention Sensor
    • Type 76 A, Sensor length 200 mm
    • Connection: G 3/4" male

    Only delivery!
  • Overfill prevention acknowlegdement-box
    Overfill prevention acknowlegdement-box
    with road tanker switch-off-electronic
    consisting of:
    • Mounting plate
    • Voltage 24 V/DC
    • Housing protection grade IP 54
    • Receipt key
    • Flash light 1 Joule
    • Horn 95 Decibel
    • Road tanker connection 907-W (24 V/DC)
    • not to be mounted directly on the tank for media such as kerosene or bioethanol
    Only Delivery!
  • Extra device Typ 907 Z
    Tank Truck Plug Type 907 Z, 24 V DC - Additional device for interrupting the filling process - Control voltage: 24 V DC
Sensors: Tank heating

Plant equipment for reliable prevention of paraffin excretion of the fuel at falling temperatures and maintenance of the pump and nozzle viscosity of the oil in the intake area (frost-free from 8°C to 12°C).

  • Tank heating system for diesel (Kl. A III)
    Tank heating system for diesel (Kl. A III) - Power: 220 Watt - Voltage: 230 V, 50 Hz
  • Magnetic fixing for tank heating
    Magnetic fixing for tank heating
    consisting of:
    - 2x magnet 42mm x 9mm
    - 2x pipe clamp 40mm - 45mm
    - 2x countersunk screw and nut M6
Pumps

Z-PK is a combination of a hand vane pump and a centrifugal pump in one housing. In the event of a complete network failure, refilling of the day tank is also ensured manually with the hand vane pump.

  • Pump set 230 V

    Pumpenkombination für Heizöl und Diesel

    bestehend aus:

    • 1x Kreiselpumpe
    • Förderleistung: 5 bis 50 ltr./min.
    • 1x Handflügelpumpe
    • Förderleistung: 15 ltr./min.
    • Tropfwanne Typ Z-PK-2100
    • Korrosionsschutz
    • Nicht montiert, nur geliefert!
  • Pump set 400 V
    Pump set
    for heating fuel and diesel
    consisting of:
    • 1x centrifugal pump:
      • pump power: 5 up to 50 ltr./min.
      • pump height: 46 up to 10 m Fl.s.
      • Delivery pressure: 3 bar
      • Set pressure: 3 bar
      • suction height: 6 m
      • voltage: 400 V
      • current: 2,0 A
      • frequency: 50 Hz
      • electric power: 0,6 kW
      • revolution: 2.900 U/min.
    • 1x hand vane pump:
      • pump power: 15 ltr./min.
      • pump height: ca. 10 m Fl.s.
      • suction height: 4 m
    • 1x Twin pump body with
      • 4 fixing points
      • diameter: 11 mm
    • suction side two inlets DN 25 / 1"
    • pressure side one outlet DN 20 / 3/4"
    • Connection with screwing possible
      • 2 ball valves 1" installed on suction side
      • 1 ball valve 3/4" installed on pressure side
    • 1x drip tray
      • completely mounted and tubed on the console
    • Corrosion protection:
      • 2-C-Coating in RAL 7032
    Not mounted, only delivered!
  • Centrifugal pump Type PK-80-015

    Kreiselpumpe

    • Fördermenge:
    • 43 ltr./min. bei 5 m FLS
    • 11 ltr./min. bei 30 m FLS
    • Förderhöhe: 46 - 10 mWs
    • Spannung: 230 V
    • Motorleistung: 0,55 kW
    • Nennstrom: 5 A
    • Motorschutzart: IP 44
    • Korrosionsschutz
  • Centrifugal pump 43-11 ltr., 400 V

    Centrifugal pump

    • Flow rate:
      • 43 ltr./min. at 5 m FLS
      • 11 ltr./min. at 30 m FLS
    • Voltage: 400 V
    • Electrical power: 0,6 kW
    • Rated current: 2 A
    • Connections:
      • suction line: 1"
      • pressure line: 1"
    • Weight: 10,8 kg
  • Drip tray for centrifugal pump

    Drip tray for centrifugal pump for separate wall mounting

    Corrosion protection:

    • 2K paint in RAL 7032
  • packaging flat
    Fix costs for packing Z-PK
Special options

additional equipment

  • Filling socket DN 50

    Filling socket DN 50

    - consists:
    Filling tube closure K,2"
    Angle 45 °, 2 "AG / AG

  • Filling pipe 2"

    Filling pipe 2"

    - Material: steel
    - screwed
  • Krampitz Sealfix M 10 ml
    Krampitz Sealfix M
    • Dichtmittel
    • Schraubensicherung
    • 10 ml
Manual

* mandarory field

  • Manual by download
    After delivery you will receive an email with the links for download.
  • Manual by letter at the owner's expense
    Die Bedienungsanleitungen, Datenblätter und Zertifikate werden Ihnen in Papierform per Brief zugestellt.
Your configuration



Description

TTE-100-LO day tank, single-walled
  • Material: steel S 235 JR
  • General type approval: Z-38.11-86
  • Volume total: 106 ltr.
  • Volume 95%: 100 ltr.
  • Medium: lubricating oil
Dimensions:
  • Length: 510 mm
  • Length total: 546 mm
  • Width: 500 mm
  • Height: 500 mm
  • Height total: 533 mm
  • Weight: 49 kg

Connection bushings:

  • on tank top 6x 2"
  • side up 2x 2" (left and right)
  • bottom 1x 3/4"
  • bottom 1x 1/2"

Base package
consists of:

1x AM-595
Burst protection 115mm

1x AM-004.1
Mechanical level indicator
consisting of:

  • adjustable float with gear transfer to the pointer
  • mountinh with a flange 
  • Standardlenght 500 mm (can be cuted) 
  • display for tank height 250 to 900 mm

1x AM-090
Type plate

8x AM-948
Dust cover 2"yellow conical


Volume: 100 ltr.
Type: Daytank
Place: Inside
Wall Design: single walled
Material: Steel
Level: Level 1
Medium: Lubricating oil

PDF-Documents

TTE/TTD Equipment Wand Bracket WK, Foot FS, Stand Column ST

TW Tank-Catch Sump

TW-A4 Tank-Catch Sump

TTE Day Tank Single Wall

TTE-A4 Day Tank Single Wall


This product consists of
Mechanical level indicator

1 x Mechanical level indicator

Prices visible after login