day tank single wall - TTE-50-LO

Item no.: TTE-50-LO-01

  • Material: steel S 235 JR
  • General type approval: Z-38.11-86
  • Volume total: 59 ltr.
  • Volume 95%: 50 ltr.
  • Medium: lubricating oil
Dimensions:
  • Length: 510 mm
  • Length total: 546 mm
  • Width: 500 mm
  • Height: 300 mm
  • Height total: 333 mm
  • Weight: 34 kg

Category: day tank single-walled (50 L - 9.000 L)


Prices visible after login
Available

Delivery status: 6-8 weeks



Security concept

Protection against fuel leakage with leak monitoring for single-walled tanks. If there is no catchment room, a oil trap must be used.

  • Oil trap single-walled for TTE-50
    Drip tray for TTE-50-DB-01

    • Material: Steel S 235 JR
    • Gen. bauaufs. Approval: Z-38.11-86
    • Volume 100%: 80 ltr.
    Dimensions:

    • Length: 510 mm
    • Total length: 670 mm
    • Width: 500 mm
    • Total width: 660 mm
    • Height: 300 mm
    • Total height: 500 mm
    • Weight: 45 kg
    Standard equipment:

    • Consoles for attachment to the tank
    • Feet with ground attachment
  • Packing flat rate sump tray
    The stated packaging flat rate applies exclusively to standard packaging and exclusively to truck transport. Seaworthy packaging will be charged separately.
  • Typ Oil detector OM 5 incl. Evaluation unit
    Oil warning probe type OM 5 incl. Evaluation unit

    - For storage rooms, dome shafts, drip pans, double-walled tanks
    - With visual / audible alarm, test / acknowledge button and relay output
    - Probe self-monitoring
    - max. 5 probes can be connected

Mounting equipment

For installation of the tank on a pair of feet (square tube), a stand bracket for raised floor installation by up to 1500 mm or for wall mounting (only economically useful) up to TTE-990.

  • Feet (1 pair) for TTE/TTD-50/100/250

    Feet (1 pair) for TTE/TTD-50/100/250

    Material: steel S 235 JR
    2-C-Coating in RAL 7032
    Square pipe 100 x 100 x 3 mm
    Length: 500 mm
    Weight/Pair: 9kg

  • Column for TTE/TTD-50/100 H=500
    Column for TTE/TTD-50/100 H=500
    Material: Steel S235 JRG2
    2-C Coating in RAL like tank
    Height: 500 mm
    Width: 500 mm
    Length: 500 mm
    Weight: 30 kg
  • Column for TTE/TTD-50/100 H=1000
    Column for TTE/TTD-50/100 H=1000
    Material: Steel S235 JRG2
    2-C Coating in RAL like tank
    Height: 1.000 mm
    Width: 500 mm
    Length: 500 mm
    Weight: 34 kg
  • Column for TTE/TTD-50/100 H=1500
    Column for TTE/TTD-50/100 H=1500
    Material: Steel S235 JRG2
    2-C Coating in RAL like tank
    Height: 1.500 mm
    Width: 500 mm
    Length: 500 mm
    Weight: 38 kg
  • Wall bracket for TTE-50
    Wall bracket for TTE-50
    Steel S 235 JRG2
    Length: 300 mm
    Weight/Pair: 10 kg
    (incl. reinforcement discs, welded on each day tank)
Packing flat

The stated packaging flat rate applies exclusively to standard packaging and exclusively to truck transport. Seaworthy packaging will be charged separately.

  • without flat-rate packaging fee for exclusive delivery of accessories
  • Packing flat rate tank
    Please only deselect if no tank is ordered!
Color

* mandatory field

  • RAL-7032 "Pebble gray"
    Standard outside coating color. Other RAL colors are available for an added charge.
Standard fittings and valves

Fittings and fittings permanently installed and required on the tank.

  • Blanking plug 2" screwable PE with seal
    Blanking plug 2" screwable PE with seal
  • Reduction 2 "x 1" PE black, Krampitz
    Reduction 2 "x 1" PE black, Krampitz Attention! Only suitable for electronic components, not for media-carrying cables!
  • Reduction 2 "x 3/4" PE black, Krampitz
    Reducer 2 "x 3/4" PE black, with sealing rubber Krampitz Attention! Only suitable for electronic components, not for media-carrying cables!
  • Bracket 90°, IA, 3/4", Brass
    bracket for floor outlet
    - Pivotable to connect ball valve
  • Ball valve 3/4", DN 20, IA thread

    Ball valve, 3/4", DN 20, inside outside thread
    PN 40 wing handle with type 98
    and screw-in connection

  • KFE ball valve 1/2"
    KFE ball valve 1/2"
    for residue outlet
  • Ventilation nozzle DN 50 250mm
    Ventilation socket DN 50 with cap
    - Ventilation cap 2" female
    - Ventilation pipe 2" x 250 mm
    - height: 250mm
Sensors: Content display
  • Level Sensor
    Stabsonde LC-Vs (Schwimmer) 500 mm
    Ausgangssignal: 4-20 mA
    Tankhöhe: 500 mm
    • Reduzierung PE 2" auf 1.1/4"
    • Anschlussstecker M12
  • Level control module in percent 1K

    Analysis module for the recording of percentage values of the tank level

    - Display in percent
    - Configuration of up to 4 switching points
    - In addition a  4 - 20 mA sensor is required
    - The 4 - 20 mA signal can also be routed to other analysis modules
    - Not required for container with PLC

Sensors: Level indicator
  • Level sensor (float switch)  (Bio-)Diesel

    - Output: Reed Contact
    - Switching function: 1 closer, falling level
    - Ambient temperature range: -5 C to + 70 C
    - Medium temperature: -5 C to + 70 C
    - with floater made of stainless steel
    - adjustable height 50 - 2.000 mm
    - cable length 5 m
    - dry run protection

  • Level sensor (float switch)  (Bio-)Diesel

    - Output: Reed Contact
    - Switching function: 1 closer, falling level
    - Ambient temperature range: -5 C to + 70 C
    - Medium temperature: -5 C to + 70 C
    - with floater made of stainless steel
    - adjustable height 50 - 2.000 mm
    - cable length 5 m
    - dry run protection

  • Level sensor (float switch)  (Bio-)Diesel

    - Output: Reed Contact
    - Switching function: 1 closer, falling level
    - Ambient temperature range: -5 C to + 70 C
    - Medium temperature: -5 C to + 70 C
    - with floater made of stainless steel
    - adjustable height 50 - 2.000 mm
    - cable length 5 m
    - dry run protection

  • Level indicator (float switch) lubricating oil/H?O
    - floater made of stainless steel
    - adjustable height 50 - 2.000 mm,
    - Cable length: 5,000 mm
    - for lubricating oil and water
    - T: max 40 C
    Only delivery!
  • 1-fold cable screw
    - Reducer G2" male - M16x1.5 female
    - Cable screw M16x1,5 AG PVC
    - 1x Sealing ring
    - Only delivery!
  • 2-fold cable screw

    - Red. "G2" AG
    - 2x M16 x 1.5 IG PE
    - 2x Cable gland M16x1.5 AG PVC
    - 1x seal ring 58 x 2,5 mm
    - Only delivery!

  • 4-fold cable screw

    - Red. "G2" AG
    - 4x M16 x 1.5 IG PE
    - 4x Cable gland M16x1.5 AG PVC
    - 1x seal ring 58 x 2,5 mm
    - 2x Seal plug
    - Only delivery!

Sensors: overfill protection

Equipment required under water law to limit the max. filling level when filled by a tanker or using fixed piping.

  • limiting level transmitter Type GWG 12-K1
    - only for diesel / heating oil with CE-mark
    - with 1,5 m cable
    - Reduction 2" x 1" (AG/IG)
    - Mandatory for tanks with a volume of 1000 litres or more
  • Level Limiter Type: NB 220 H

    Level Limiter Type: NB 220 H

    - with potential free changer
    - Supply: 230 V, 50 Hz
    - not to be mounted directly on the tank for media such as kerosene or bioethanol

    Only delivery!
  • Overfill prevention Type 76 A

    Overfill prevention Sensor

    - Type 76 A, Sensor length 200 mm
    - Connection: G 3/4" male
    Only delivery!
  • Overfill protection confirmation box

    - Mounting plate
    - Voltage 24 V/DC
    - Housing protection grade IP 54
    - switch-off-electronic
    - Receipt key
    - Flash light 1 Joule
    - Horn 95 Decibel
    - Road tanker connection 907-Z
    - not to be mounted directly on the tank for media such as kerosene or bioethanol

    Only Delivery!
  • Extra device Typ 907 Z
    - for automatic shutdown of the tanker pump
    - Additional device for interrupting the filling process
    - Control voltage: 24 V DC
    - steel
Sensors: Tank heating

Plant equipment for reliable prevention of paraffin excretion of the fuel at falling temperatures and maintenance of the pump and nozzle viscosity of the oil in the intake area (frost-free from 8C to 12C).

  • Tank heating system for diesel (Kl. A III)
    Tank heating system for diesel (Kl. A III) - Power: 220 Watt - Voltage: 230 V, 50 Hz
  • Magnetic fixing for tank heating
    Magnetic fixing for tank heating
    consisting of:
    - 2x magnet 42mm x 9mm
    - 2x pipe clamp 40mm - 45mm
    - 2x countersunk screw and nut M6
Pumps

Z-PK is a combination of a hand vane pump and a centrifugal pump in one housing. In the event of a complete network failure, refilling of the day tank is also ensured manually with the hand vane pump.

  • Pump set 230 V

    Pumpenkombination für Heizöl und Diesel

    bestehend aus:

    • 1x Kreiselpumpe
    • Förderleistung: 5 bis 50 ltr./min.
    • 1x Handflügelpumpe
    • Förderleistung: 15 ltr./min.
    • Tropfwanne Typ Z-PK-2100
    • Korrosionsschutz
    • Nicht montiert, nur geliefert!
  • Pump set 400 V

    - Medium: diesel / heating oil
    - 1x centrifugal pump:
       - Delivery rate: 5 to 50 ltr./min.
       -Pumping height: 46 to 10 m Fl.s.
       -Pumping pressure: 3 bar
       -setting pressure: 3 bar
       -Suction height: 6 m
       -voltage: 400 V
       -current consumption: 2.0 A
       -frequency: 50 Hz
       -Electric power: 0.6 kW
       -speed: 2,900 rpm
    - 1x hand wing pump:
       - delivery rate: 15 ltr./min.
       - delivery head: approx. 10 m Fl.s.
       - suction height: 4 m
    - 1x twin pump body:
       - 4 pieces mounting holes
       - diameter: 11 mm
       - Two inlets DN 25 / 1" on the suction side
       - Outlet on the pressure side DN 20 / 3/4
       - Connection internal thread for:
       - 2 ball valves 1" for suction side
       - 1 ball valve 3/4" for pressure side
       - 1x drip tray
       - completely assembled and piped on console
    - Corrosion protection 2-component paint in RAL 7032

    Not assembled, only delivered!

  • Centrifugal pump Type PK-80-015

    Kreiselpumpe

    • Fördermenge:
    • 43 ltr./min. bei 5 m FLS
    • 11 ltr./min. bei 30 m FLS
    • Förderhöhe: 46 - 10 mWs
    • Spannung: 230 V
    • Motorleistung: 0,55 kW
    • Nennstrom: 5 A
    • Motorschutzart: IP 44
    • Korrosionsschutz
  • Centrifugal pump 43-11 ltr., 400 V

    Centrifugal pump

    • Flow rate:
      • 43 ltr./min. at 5 m FLS
      • 11 ltr./min. at 30 m FLS
    • Voltage: 400 V
    • Electrical power: 0,6 kW
    • Rated current: 2 A
    • Connections:
      • suction line: 1"
      • pressure line: 1"
    • Weight: 10,8 kg
  • Drip tray for centrifugal pump

    Drip tray for centrifugal pump for separate wall mounting

    Corrosion protection:

    • 2K paint in RAL 7032
  • Hand vane pump K1 3/4" 14 ltr/min

    - Material: cast iron
    - incl. wooden lever
    - Weight: 6,2 kg
    - Connection: 3/4"
    - Flow: 15 ltr/min
    - Flow height: 10 m
    - Suction height: 4 m
    - Corrosion protection: 2-C-coating in RAL 7032

  • Drip tray for hand vane pump
    - for separate wall mounting
    - Corrosion protection K paint in RAL 7032
  • Drip tray for hand vane pump
    - for separate wall mounting
    - Corrosion protection K paint in RAL 7032
  • Drip tray for hand vane pump
    - for separate wall mounting
    - Corrosion protection K paint in RAL 7032
  • Hand crank pump
    - Material: aluminium
    - Connection: 1".
    - Delivery rate: 100 ltr/min
    - Delivery head approx.: 10 m
    - Suction height approx.: 4 m
    - Corrosion protection: 2-component paint in RAL 7032
    - No documentation available!
Special options

additional equipment

  • Filling socket DN 50 45°

    Filling socket DN 50

    - filling pipe closure 2" x 2 1/2"
    - 1 x angle 2", 45 female
  • Fassstecker mit Köcher 3/4"
    - Barrel plug 3/4"
    - Quiver 2"
    - Suction hose 3/4"
    - Length 3000 mm
  • Suction connection for barrel, 1? with quiver
    - Barrel plug 1"
    - Quiver 2"
    - suction hose 1"
    - length 3000 mm
Manual

* mandarory field

  • Manual by download
    After delivery you will receive an email with the links for download.
  • Manual by letter at the owner's expense
    The operating instructions, data sheets and certificates are available in paper form delivered by letter.
Price as configured:

Description

TTE-50-LO day tank, single-walled
  • Material: steel S 235 JR
  • General type approval: Z-38.11-86
  • Volume total: 59 ltr.
  • Volume 95%: 50 ltr.
  • Medium: lubricating oil
Dimensions:
  • Length: 510 mm
  • Length total: 546 mm
  • Width: 500 mm
  • Height: 300 mm
  • Height total: 333 mm
  • Weight: 34 kg

Connection bushings:

  • on tank top 6x 2"
  • side up 2x 2" (left and right)
  • bottom 1x 3/4"
  • bottom 1x 1/2"

Base package
consists of:

1x AM-595
Burst protection 115mm

1x AM-004.1
Mechanical level indicator
consisting of:

  • adjustable float with gear transfer to the pointer
  • mountinh with a flange 
  • Standardlenght 500 mm (can be cuted) 
  • display for tank height 250 to 900 mm

1x AM-090
Type plate

8x AM-948
Dust cover 2"yellow conical


Volume: 50 ltr.
Type: Daytank
Place: Inside
Wall Design: single walled
Material: Steel
Level: Level 1
Medium: Lubricating oil

PDF-Documents

TTE/TTD Equipment Wand Bracket WK, Foot FS, Stand Column ST

TW Tank-Catch Sump

TW-A4 Tank-Catch Sump

TTE Day Tank Single Wall

TTE-A4 Day Tank Single Wall