day tank single wall - TTE-500-DB

Note: The illustrations may also contain accessories and special equipment which are not included in the standardscope of delivery because of example illustration.

day tank single wall - TTE-500-DB

Item no.: TTE-500-DB-01

TTE-500-D
Single-walled day tank for supplying aggregates with fuel or lubricating oil.

- Material: steel S 235 JR
- Certified acc. German DIBT: Z-38.11-127
- Volume: 100% filling height approx.: 500 ltr
- Volume: 95% filling height approx.: 470 ltr

Standard dimension:

- Length: 1,510 mm
- Length total: 1,550 mm
- Width: 750 mm
- Width total: 775 mm
- Height: 505 mm
- Height total: 530 mm
- Weight: 115 kg (appr. without equipment, empty)

Category: day tank single-walled (100 ltr. - 1,950 ltr.)

Prices visible after login

Available

Delivery status: 6-8 weeks

Oil trap

1x Oil trap single-walled for TTE-500
Show description
Drip tray for TTE-500

Material: Steel S 235 JR

Gen. bauaufs. Approval: Z-38.11-86

Volume 100%: 550 ltr.
Dimensions:

Length: 1,510 mm

Total length: 1,670 mm

Width: 750 mm

Total width: 910 mm

Height: 500 mm

Total height: 700 mm

Weight: 115 kg
Standard equipment:

Consoles for attachment to the tank

Feet with ground attachment
1x Typ Oil detector OM 5 incl. Evaluation unit
Show description

Oil warning probe type OM 5 incl. Evaluation unit
- For storage rooms, dome shafts, drip pans, double-walled tanks
- With visual / audible alarm, test / acknowledge button and relay output
- Probe self-monitoring
- max. 5 probes can be connected

Mounting equipment

1x Feet (1 pair) for TTE/TTD-500/750/990
Show description

Feet (1 pair) for TTE/TTD-500/750/990

Material: steel S 235 JR
2-C-Coating in RAL 7032
Square pipe 100 x 100 x 3 mm
Length: 750 mm
Weight/Pair: 14kg
1x Column for TTE/TTD-500/750 H=500
Show description

Column for TTE/TTD-500/750 H=500
1x Column for TTE/TTD-500/750 H=1000
Show description

Column for TTE/TTD-500/750 H=1000
1x Column for TTE/TTD-500/750 H=1500
Show description

Column for TTE/TTD-500/750 H=1500
1x Wall bracket for TTE/TTD-100/250/500
Show description

Wall bracket for TTE/TTD-100/250/500
Steel S 235 JRG2
Length: 500 mm
Weight/Pair: 12 kg
(incl. reinforcement discs, welded on each day tank)

Color

* mandatory field

RAL-7032 "Pebble gray"
Show description

Standard outside coating color. Other RAL colors are available for an added charge.

Sensors: Content display

1x Level Sensor
Show description
Stabsonde LC-Vs (Schwimmer) 500 mm
Ausgangssignal: 4-20 mA
Tankhöhe: 500 mm
- Reduzierung PE 2" auf 1.1/4"
- Anschlussstecker M12
1x Level control module in percent 1K
Show description

Analysis module for the recording of percentage values of the tank level

- Display in percent
- Configuration of up to 4 switching points
- In addition a 4 - 20 mA sensor is required
- The 4 - 20 mA signal can also be routed to other analysis modules
- Not required for container with PLC

Sensors: Level indicator

1x Level sensor (float switch) (Bio-)Diesel
Show description

- Output: Reed Contact
- Switching function: 1 closer, falling level
- Ambient temperature range: -5 ° C to + 70 ° C
- Medium temperature: -5 ° C to + 70 ° C
- with floater made of stainless steel
- adjustable height 50 - 2.000 mm
- cable length 5 m
- dry run protection
2x Level sensor (float switch) (Bio-)Diesel
Show description

- Output: Reed Contact
- Switching function: 1 closer, falling level
- Ambient temperature range: -5 ° C to + 70 ° C
- Medium temperature: -5 ° C to + 70 ° C
- with floater made of stainless steel
- adjustable height 50 - 2.000 mm
- cable length 5 m
- dry run protection
3x Level sensor (float switch) (Bio-)Diesel
Show description

- Output: Reed Contact
- Switching function: 1 closer, falling level
- Ambient temperature range: -5 ° C to + 70 ° C
- Medium temperature: -5 ° C to + 70 ° C
- with floater made of stainless steel
- adjustable height 50 - 2.000 mm
- cable length 5 m
- dry run protection
1x Level indicator (float switch) lubricating oil/H?O
Show description

- floater made of stainless steel
- adjustable height 50 - 2.000 mm,
- Cable length: 5,000 mm
- for lubricating oil and water
- T: max 40 ° C
Only delivery!
1x 1-fold cable screw
Show description

- Reducer G2" male - M16x1.5 female
- Cable screw M16x1,5 AG PVC
- 1x Sealing ring
- Only delivery!
1x 2-fold cable screw
Show description

- Red. "G2" AG
- 2x M16 x 1.5 IG PE
- 2x Cable gland M16x1.5 AG PVC
- 1x seal ring 58 x 2,5 mm
- Only delivery!
1x 4-fold cable screw
Show description

- Red. "G2" AG
- 4x M16 x 1.5 IG PE
- 4x Cable gland M16x1.5 AG PVC
- 1x seal ring 58 x 2,5 mm
- 2x Seal plug
- Only delivery!

Sensors: overfill protection

Equipment required under water law to limit the max. filling level when filled by a tanker or using fixed piping.

1x limiting level transmitter Type GWG 12-K1
Show description

- only for diesel / heating oil with CE-mark
- with 1,5 m cable
- Reduction 2" x 1" (AG/IG)
- Mandatory for tanks with a volume of 1000 litres or more
1x Overfill prevention Type 76 A
Show description

Overfill prevention Sensor
- Type 76 A, Sensor length 200 mm
- Connection: G 3/4" male
Only delivery!
1x Level Limiter Type: NB 220 H
Show description

Level Limiter Type: NB 220 H

- with potential free changer
- Supply: 230 V, 50 Hz
- not to be mounted directly on the tank for media such as kerosene or bioethanol
Only delivery!
1x Overfill protection confirmation box
Show description

- Mounting plate
- Voltage 24 V/DC
- Housing protection grade IP 54
- switch-off-electronic
- Receipt key
- Flash light 1 Joule
- Horn 95 Decibel
- Road tanker connection 907-Z
- not to be mounted directly on the tank for media such as kerosene or bioethanol
Only Delivery!

Sensors: Tank heating

Plant equipment for reliable prevention of paraffin excretion of the fuel at falling temperatures and maintenance of the pump and nozzle viscosity of the oil in the intake area (frost-free from 8°C to 12°C).

1x Tank heating system for diesel (Kl. A III)
Show description

Tank heating system for diesel (Kl. A III) - Power: 220 Watt - Voltage: 230 V, 50 Hz
1x Magnetic fixing for tank heating
Show description

Magnetic fixing for tank heating
consisting of:
- 2x magnet 42mm x 9mm
- 2x pipe clamp 40mm - 45mm
- 2x countersunk screw and nut M6

Pumps

Z-PK is a combination of a hand vane pump and a centrifugal pump in one housing. In the event of a complete network failure, refilling of the day tank is also ensured manually with the hand vane pump.

1x Pump set 230 V
Show description
Pumpenkombination für Heizöl und Diesel

bestehend aus:
- 1x Kreiselpumpe
- Förderleistung: 5 bis 50 ltr./min.
- 1x Handflügelpumpe
- Förderleistung: 15 ltr./min.
- Tropfwanne Typ Z-PK-2100
- Korrosionsschutz
- Nicht montiert, nur geliefert!
1x Pump set 400 V
Show description

- Medium: diesel / heating oil
- 1x centrifugal pump:
   - Delivery rate: 5 to 50 ltr./min.
   -Pumping height: 46 to 10 m Fl.s.
   -Pumping pressure: 3 bar
   -setting pressure: 3 bar
   -Suction height: 6 m
   -voltage: 400 V
   -current consumption: 2.0 A
   -frequency: 50 Hz
   -Electric power: 0.6 kW
   -speed: 2,900 rpm
- 1x hand wing pump:
   - delivery rate: 15 ltr./min.
   - delivery head: approx. 10 m Fl.s.
   - suction height: 4 m
- 1x twin pump body:
   - 4 pieces mounting holes
   - diameter: 11 mm
   - Two inlets DN 25 / 1" on the suction side
   - Outlet on the pressure side DN 20 / 3/4
   - Connection internal thread for:
   - 2 ball valves 1" for suction side
   - 1 ball valve 3/4" for pressure side
   - 1x drip tray
   - completely assembled and piped on console
- Corrosion protection 2-component paint in RAL 7032

Not assembled, only delivered!
1x Centrifugal pump Type PK-80-015
Show description
Kreiselpumpe
- Fördermenge:
- 43 ltr./min. bei 5 m FLS
- 11 ltr./min. bei 30 m FLS
- Förderhöhe: 46 - 10 mWs
- Spannung: 230 V
- Motorleistung: 0,55 kW
- Nennstrom: 5 A
- Motorschutzart: IP 44
- Korrosionsschutz
1x Centrifugal pump 43-11 ltr., 400 V
Show description
Centrifugal pump
- Flow rate:
  - 43 ltr./min. at 5 m FLS
  - 11 ltr./min. at 30 m FLS
- Voltage: 400 V
- Electrical power: 0,6 kW
- Rated current: 2 A
- Connections:
  - suction line: 1"
  - pressure line: 1"
- Weight: 10,8 kg
1x Drip tray for centrifugal pump
Show description
Drip tray for centrifugal pump for separate wall mounting

Corrosion protection:
- 2K paint in RAL 7032
1x Drip tray for hand vane pump
Show description

- for separate wall mounting
- Corrosion protection K paint in RAL 7032
1x Drip tray for hand vane pump
Show description

- for separate wall mounting
- Corrosion protection K paint in RAL 7032
1x Drip tray for hand vane pump
Show description

- for separate wall mounting
- Corrosion protection K paint in RAL 7032
1x Hand crank pump
Show description

- Material: aluminium
- Connection: 1".
- Delivery rate: 100 ltr/min
- Delivery head approx.: 10 m
- Suction height approx.: 4 m
- Corrosion protection: 2-component paint in RAL 7032
- No documentation available!

Special options

additional equipment

1x Filling socket DN 50 45°
Show description

Filling socket DN 50
- filling pipe closure 2" x 2 1/2"
- 1 x angle 2", 45° female
1x Fassstecker mit Köcher 3/4"
Show description

- Barrel plug 3/4"
- Quiver 2"
- Suction hose 3/4"
- Length 3000 mm
1x Suction connection for barrel, 1? with quiver
Show description

- Barrel plug 1"
- Quiver 2"
- suction hose 1"
- length 3000 mm

Manual

Manual by letter at the owner's expense

1x Manual by letter at the owner's expense
Show description

The operating instructions, data sheets and certificates are available in paper form delivered by letter.

Price as configured:

Description

TTE-500-D
Single-walled day tank for supplying aggregates with fuel or lubricating oil.

- Material: steel S 235 JR
- Certified acc. German DIBT: Z-38.11-127
- Volume: 100% filling height approx.: 500 ltr
- Volume: 95% filling height approx.: 470 ltr

Standard dimension:

- Length: 1,510 mm
- Length total: 1,550 mm
- Width: 750 mm
- Width total: 775 mm
- Height: 505 mm
- Height total: 530 mm
- Weight: 115 kg (appr. without equipment, empty)

Standard Equipment

1x	AM-595	Burst protection Ø 115 mm
1x	AM-004.1	Mechanical level indicator D/HEL
1x	AM-090	Type plate
8x	AM-948	Dust cover 2 "yellow conical
4x	AM-941	Blanking plug 2" screwable PE with seal
2x	AM-960-21P	Reduction 2 "x 3/4" PE black, Krampitz
2x	AM-960-22P	Reduction 2 "x 1" PE black, Krampitz
1x	F-MS-34-031	Ball valve 3/4", DN 20, IA thread
1x	F-MS-34-038	Bracket 90°, IA, 3/4", Brass
1x	F-MS-12-018	KFE ball valve 1/2"
1x	AM-911	Ventilation nozzle DN 50 250mm
1x	V-10-001	Krampitz Sealfix M 10 ml
1x	BE2	Manual by download

Basic package:
- Connection on top: 6x 2"
- Connection on the side top: 2x 2" (right/left)
- Bottom connection: 1x 3/4" flow / 1x 1/2" residual discharge

Corrosion protection:

- inside: raw, oiled
- outside: coating L-A-1, RAL 7032

Documentation:

- Test documents in German (Sending by mail)
- Test certificate
- Overview drawing
- Building inspection approval
- Operating Instructions Tank
- Datasheets / Operating Instructions for accessories
- Certificates WHG and ISO 9001
- additional documentation in Paper, on CD or by mail will be charged extra