day tank single wall - TTE-XL-2500-DB

Item number: TTE-XL-2500-DB-01

TTE-XL-2500-DB day tank XL, single-walled

  • Material: Steel S 235 JR
  • Gen. bauaufs. Approval: Z-38.11-127
  • Volume 100%: 2,900 ltr.
  • Volume 95%: 2,800 ltr.
  • Medium: diesel / bio-diesel / fuel oil

Dimensions:

  • Length: 2,000 mm
  • Total length: 2,135 mm
  • Width: 1,250 mm
  • Total width: 1,260 mm
  • Height: 1,250 mm
  • Total height: 1,450 mm
  • Weight: 530 kg

Connections:

  • top: 10x 2 "
  • sideways: 2x 2 "
  • down flow 1 "
  • bottom emptying 1/2 "

Standard features:

  • Inspection opening DN 500
  • Entry steps in the tank for revision
  • Measures 100 x 100 x 3 mm
  • 4x crane eyelets

Category: Tagestank einwandig (2500 L - 5.000 L)


Prices visible after login
Available

Delivery status: 10-12 weeks



Oil trap
  • Oil trap single-walled for TTE-XL-2500
    • Material: steel S 235 JR
    • General type approval: Z-38.11-127
    • Volume total: 3.000 ltr.
  • Packaging flat rate sump tray
    The stated packaging flat rate applies exclusively to standard packaging and exclusively to truck transport. Seaworthy packaging will be charged separately.
  • Typ Oil detector OM 5 incl. Evaluation unit
    Oil warning probe type OM 5 incl. Evaluation unit
    • For storage rooms, dome shafts, drip pans, double-walled tanks
    • With visual / audible alarm, test / acknowledge button and relay output
    • Probe self-monitoring
Packing flat

The stated packaging flat rate applies exclusively to standard packaging and exclusively to truck transport. Seaworthy packaging will be charged separately.

  • without flat-rate packaging fee for exclusive delivery of accessories
  • Packing flat rate tank
    Please only deselect if no tank is ordered!
Color

* mandatory field

  • RAL-7032 "Pebble gray"
    Standard outside coating color. Other RAL colors are available for an added charge.
Fitting
  • Blanking plug 2" screwable PE with seal
    Blanking plug 2" screwable PE with seal
  • Reduction 2 "x 1" PE black, Krampitz
    Reduction 2 "x 1" PE black, Krampitz Attention! Only suitable for electronic components, not for media-carrying cables!
  • Reduction 2 "x 3/4" PE black, Krampitz
    Reducer 2 "x 3/4" PE black, with sealing rubber Krampitz Attention! Only suitable for electronic components, not for media-carrying cables!
  • Bracket 90°, IA, 3/4", Brass
    bracket for floor outlet
    - Pivotable to connect ball valve
  • Ball valve 3/4", DN 20, IA thread

    Ball valve, 3/4", DN 20, inside outside thread
    PN 40 wing handle with type 98
    and screw-in connection

  • KFE ball valve 1/2"
    KFE ball valve 1/2"
    for residue outlet
  • Ventilation socket DN 50 with cap
    Ventilation socket DN 50 with cap
    - Ventilation cap 2" female
    - Ventilation pipe 2" x 250 mm
Sensors: Content display
  • Stabsonde  für Tanköhe 1250 mm

    Stabsonde NR 56 für Tanköhe 1250 mm

    • Tankinhaltsgeber für hochviskose Medien
    • Einbaulänge: 1270 mm
    • Ausgangssignal: 4-20 mA/3L
    • Betriebsspannug:9-32V DC
    • Anschluss: G1 1/4"
  • Pressure transducer Type AUR LC-Vs
    • Pressure transducer Type AUR LC-Vs
    • Output signal 4-20 mA
  • Level control module in percent 1K

    Analysis module for the recording of percentage values of the tank level.

    • Display in percent
    • Configuration of up to 4 switching points
    • In addition a  4 - 20 mA sensor is required
    • The 4 - 20 mA signal can also be routed to other analysis modules
    • Not required for container with PLC
Sensors: Level indicator
  • Level sensor (float switch)

    Level sensor (float switch) diesel / heating oil

    • Output: Reed Contact
    • Switching function: 1 closer, falling level
    • Ambient temperature range: -5 ° C to + 70 ° C
    • Medium temperature: -5 ° C to + 70 ° C
    • with floater made of stainless steel
    • adjustable height 50 - 2.000 mm
    • cable length 5 m
    • dry run protection
  • Level sensor (float switch)

    Level sensor (float switch) diesel / heating oil

    • Output: Reed Contact
    • Switching function: 1 closer, falling level
    • Ambient temperature range: -5 ° C to + 70 ° C
    • Medium temperature: -5 ° C to + 70 ° C
    • with floater made of stainless steel
    • adjustable height 50 - 2.000 mm
    • cable length 5 m
    • dry run protection
  • Level sensor (float switch)

    Level sensor (float switch) diesel / heating oil

    • Output: Reed Contact
    • Switching function: 1 closer, falling level
    • Ambient temperature range: -5 ° C to + 70 ° C
    • Medium temperature: -5 ° C to + 70 ° C
    • with floater made of stainless steel
    • adjustable height 50 - 2.000 mm
    • cable length 5 m
    • dry run protection
  • 1-fold cable screw

    1-fach Kabelverschraubung 2" PE mit Dichtung

  • 2-fold cable screw

    2-fach Kabelverschraubung 2" PE mit Dichtung

  • 4-fold cable screw
    4-fach Kabelverschraubung 2" PE mit Dichtung
Sensors: overfill protection

Equipment required under water law to limit the max. filling level when filled by a tanker or using fixed piping.

  • limiting level transmitter Type GWG 12-K1
    Limit value transmitter Type GWG 12-K1
    • for diesel / heating oil only
    • with 1,5 m cable and 2" / 1" reducer (OT/IT)
  • Overfill prevention, Sensor length 200 mmType 76 A, 200 mm
    Overfill prevention Sensor
    • Type 76 A, Sensor length 200 mm
    • Connection: G 3/4" male

    Only delivery!
  • Level Limiter Type: NB 220 H

    Level Limiter Type: NB 220 H

    • with potential free changer
    • Supply: 230 V, 50 Hz
    Only delivery!
  • Overfill prevention acknowlegdement-box
    Overfill prevention acknowlegdement-box
Sensors: Tank heating

Plant equipment for reliable prevention of paraffin excretion of the fuel at falling temperatures and maintenance of the pump and nozzle viscosity of the oil in the intake area (frost-free from 8°C to 12°C).

  • Tank heater

    Tank heater

    • certified for diesel and heating oil
    • with TÜV-certification (Germany)
    • Power: 1,5 kW
    • Voltage: 230 V / 50 Hz,
    • with integrated 1-phase controller (appr. 8-12°C)
      (ON below 8°C / OFF above 12°C)
    • with 1-phase limiter at appr. 55°C
    • recommende for tanks up to appr. 8.000 ltr.
    • For better effectiveness of the heater a  tank insulation is strongly recommended
  • Magnetic fixing for tank heating
    Magnetic fixing for tank heating
    consisting of:
    - 2x magnet 42mm x 9mm
    - 2x pipe clamp 40mm - 45mm
    - 2x countersunk screw and nut M6
Thermal insulation
  • Insulation incl. hood element
    Insulation of the tank walls
    consisting of:
    • mineral wool and zinc sheet cover with coating equal to position coating
    • incl. 2 x ventilation openings with weather and insect protection screen per length side
    • thickness 80 mm
    Hood element
    mounted on the tank top
    • dimensions adapted
    • 2 x pipe openings 300 x 100 mm with blind plate
    • gas pressureized springs
    The ladder is not applicable in case of tank insulation!
    The volume of the tank is getting smaler by tank insulation!
    The total dimensions can be changed by the tank insulation!
    Optionally a step plate can be offered after production of the drawing!

    Attention! Roof area not accessible!
Pumps

Z-PK is a combination of a hand vane pump and a centrifugal pump in one housing. In the event of a complete network failure, refilling of the day tank is also ensured manually with the hand vane pump.

  • Pump set 230 V

    Pumpenkombination für Heizöl und Diesel

    bestehend aus:

    • 1x Kreiselpumpe
    • Förderleistung: 5 bis 50 ltr./min.
    • 1x Handflügelpumpe
    • Förderleistung: 15 ltr./min.
    • Tropfwanne Typ Z-PK-2100
    • Korrosionsschutz
    • Nicht montiert, nur geliefert!
  • Pump set 400 V
    Pump set
    for heating fuel and diesel
    consisting of:
    • 1x centrifugal pump:
      • pump power: 5 up to 50 ltr./min.
      • pump height: 46 up to 10 m Fl.s.
      • Delivery pressure: 3 bar
      • Set pressure: 3 bar
      • suction height: 6 m
      • voltage: 400 V
      • current: 2,0 A
      • frequency: 50 Hz
      • electric power: 0,6 kW
      • revolution: 2.900 U/min.
    • 1x hand vane pump:
      • pump power: 15 ltr./min.
      • pump height: ca. 10 m Fl.s.
      • suction height: 4 m
    • 1x Twin pump body with
      • 4 fixing points
      • diameter: 11 mm
    • suction side two inlets DN 25 / 1"
    • pressure side one outlet DN 20 / 3/4"
    • Connection with screwing possible
      • 2 ball valves 1" installed on suction side
      • 1 ball valve 3/4" installed on pressure side
    • 1x drip tray
      • completely mounted and tubed on the console
    • Corrosion protection:
      • 2-C-Coating in RAL 7032
    Not mounted, only delivered!
  • Centrifugal pump Type PK-80-015

    Kreiselpumpe

    • Fördermenge:
    • 43 ltr./min. bei 5 m FLS
    • 11 ltr./min. bei 30 m FLS
    • Förderhöhe: 46 - 10 mWs
    • Spannung: 230 V
    • Motorleistung: 0,55 kW
    • Nennstrom: 5 A
    • Motorschutzart: IP 44
    • Korrosionsschutz
  • Centrifugal pump 43-11 ltr., 400 V

    Centrifugal pump

    • Flow rate:
      • 43 ltr./min. at 5 m FLS
      • 11 ltr./min. at 30 m FLS
    • Voltage: 400 V
    • Electrical power: 0,6 kW
    • Rated current: 2 A
    • Connections:
      • suction line: 1"
      • pressure line: 1"
    • Weight: 10,8 kg
  • Drip tray for centrifugal pump

    Drip tray for centrifugal pump for separate wall mounting

    Corrosion protection:

    • 2K paint in RAL 7032
  • packaging flat
    Fix costs for packing Z-PK
Special options

additional equipment

  • Filling socket DN 50

    Filling socket DN 50

    - consists:
    Filling tube closure K,2"
    Angle 45 °, 2 "AG / AG

  • Filling pipe 2"
    Filling pipe 2"
    Material: steel
    screwed
  • Krampitz Sealfix M 10 ml
    Krampitz Sealfix M
    • Dichtmittel
    • Schraubensicherung
    • 10 ml
Manual

* mandarory field

  • Manual by download
    After delivery you will receive an email with the links for download.
  • Manual by letter at the owner's expense
    Die Bedienungsanleitungen, Datenblätter und Zertifikate werden Ihnen in Papierform per Brief zugestellt.
Your configuration



Description

TTE-XL-2500-DB day tank XL, single-walled

  • Material: Steel S 235 JR
  • Gen. bauaufs. Approval: Z-38.11-127
  • Volume 100%: 2,900 ltr.
  • Volume 95%: 2,800 ltr.
  • Medium: diesel / bio-diesel / fuel oil

Dimensions:

  • Length: 2,000 mm
  • Total length: 2,135 mm
  • Width: 1,250 mm
  • Total width: 1,260 mm
  • Height: 1,250 mm
  • Total height: 1,450 mm
  • Weight: 530 kg

Connections:

  • top: 10x 2 "
  • sideways: 2x 2 "
  • down flow 1 "
  • bottom emptying 1/2 "

Standard features:

  • Inspection opening DN 500
  • Entry steps in the tank for revision
  • Measures 100 x 100 x 3 mm
  • 4x crane eyelets

basic package
consisting of:

1x AM-595
Bursting protection 115mm

1x AM-001
Float content display type 1000 Unimes

  • Unimes Universal D, GB, F
  • adjustable for tank heights from 900 to 2,000 mm
  • Scoreboard in percent
  • Stepped thread: 2 "and 1 1/2"

1x AM-925.2
Filling tube 2 "

1x AM-090
nameplate

1x X-S-600-002
Dome lid DN 600 for dome entry DN 500

8x AM-948
Dust caps 2 "yellow conical

Corrosion protection:

  • Outside: 2-component paint finish in RAL 7032
  • (Corrosion protection system L-A-1)
  • Inside: raw / oiled

Documentation:

  • Test documents in German (sent by mail)
  • certificate
  • Assembly drawing
  • Building inspection approval
  • Operating Instructions Tank
  • Data sheets / operating instructions for accessories
  • Certificates WHG and ISO 9001
  • Additional documentation in paper form, on CD or by e-mail will be charged extra

Volume: 2500 ltr.
Type: Daytank
Medium: Diesel-biodiesel
Place: Inside
Wall Design: single walled
Material: Steel
Level: Level 1

PDF-Documents

TW-XL Tank-Catch Sump

TW-XL-A4 Tank-Catch Sump

TTE-XL Day Tank Single Wall XL

TTE-XL-A4 Day Tank Single Wall XL