storage tank double wall - KTD-3000-LO
Note: The illustrations may also contain accessories and special equipment which are not included in the standardscope of delivery because of example illustration.

Item no.: KTD-3000-LO-01

  • Material: steel S 235 JR
  • General type approval: Z-38.12-23
  • Volume total: 3.500 ltr.
  • Volume 95%: 3.300 ltr.
  • Medium: lubricating oil
Dimensions:
  • Length: 2.000 mm
  • Width: 1.250 mm
  • Width total: 1.260 mm
  • Height: 1.500 mm
  • Height total: 1.950 mm
  • Weight: 920 kg

Category: storage tank double-walled (950 L - 20.000 L)

Prices visible after login
Available

Delivery status: 6-8 weeks

Packing flat

The stated packaging flat rate applies exclusively to standard packaging and exclusively to truck transport. Seaworthy packaging will be charged separately.

  • without flat-rate packaging fee for exclusive delivery of accessories
  • packaging flat
    Fix costs for packing of of tanks over 2000 ltr. up to 5000 ltr.
Coating (inside) in mē

The antistatic inner coating is a corrosion protection for resistance to stress caused by media such as kerosene or other fuels with a low discharge capacity and a tendency to static charging.

Color

* mandatory field

  • RAL-7032 "Pebble gray"
    Standard outside coating color. Other RAL colors are available for an added charge.
Standardfittings und -armaturen
  • Blanking plug 2" screwable PE with seal
    Blanking plug 2" screwable PE with seal
  • Reduction 2 "x 1" PE black, Krampitz
    Reduction 2 "x 1" PE black, Krampitz Attention! Only suitable for electronic components, not for media-carrying cables!
  • Reduction 2 "x 3/4" PE black, Krampitz
    Reducer 2 "x 3/4" PE black, with sealing rubber Krampitz Attention! Only suitable for electronic components, not for media-carrying cables!
  • Ventilation nozzle DN 50 250mm
    Ventilation socket DN 50 with cap
    - Ventilation cap 2" female
    - Ventilation pipe 2" x 250 mm
    - height: 250mm
Special options

additional equipment

  • Suction pipe 1" flanged with foot valve
    - for tank height up to 2000mm
    - flanged
    - diameter: 160mm
    - 4-hole flange with welded 1" socket
    - seal
  • Suction pipe 2" flanged with foot valve

    - foot valve
    - flanged
    - diameter 160mm
    - 4-hole flange with welded bush 1?
    - seal

  • Filling socket DN 50 45°

    Filling socket DN 50

    - filling pipe closure 2" x 2 1/2"
    - 1 x angle 2", 45° female
  • Filling nozzle DN 80 with tank truck coupling

    Filling nozzle DN 80 with tank truck coupling

    -father coupling VK 80Ms. DIN 28450
    -blind cover MK 80M
    -brass tanker chain L=300mm

  • Krampitz Sealfix M 10 ml
    Krampitz Sealfix M
    • Dichtmittel
    • Schraubensicherung
    • 10 ml
Leak monitoring device

*mandatory field

  • Vacuum meter static Type KÜR 5
    - General technical approval: Z-65.22-158
    - Connection 1/2 "AG
    - Radial connection (bottom)
  • cover Vacuum meter static Type KÜR 5

    cover Vacuum meter static Type KÜR 5

    - outdoor installation
    - Z-65.22-158
    - Material: steel
  • Vakuum leak detector Eurovac-HV (AC 230V)

    Leak monitoring device Type Eurovac-HV
    Medium: Diesel / heating oil     

    - Voltage: 230 V
    - with potential free contact
    - KVU-No.: 312.011.15

  • Leak monitoring device Type VL-330
    Leak monitoring device Type VL-330
    • Voltage: 24 V DC
    • for double-walled tanks
Sensors: Content display
  • Level Sensor
    - Resistance reed chain actuated by float magnet
    - Output signal: 4-20 mA
    - tank height: 1500 mm
    - Reduction PE 2" to 1.1/4
    - Connector plug M12
  • Level control module in percent 1K

    Analysis module for the recording of percentage values of the tank level

    - Display in percent
    - Configuration of up to 4 switching points
    - In addition a  4 - 20 mA sensor is required
    - The 4 - 20 mA signal can also be routed to other analysis modules
    - Not required for container with PLC

Sensors: Level indicator
  • Level sensor (float switch) (Bio-)Diesel

    - Output: Reed Contact
    - Switching function: 1 closer, falling level
    - Ambient temperature range: -5 ° C to + 70 ° C
    - Medium temperature: -5 ° C to + 70 ° C
    - with floater made of stainless steel
    - adjustable height 50 - 2.000 mm
    - cable length 5 m
    - dry run protection

  • Level sensor (float switch) (Bio-)Diesel

    - Output: Reed Contact
    - Switching function: 1 closer, falling level
    - Ambient temperature range: -5 ° C to + 70 ° C
    - Medium temperature: -5 ° C to + 70 ° C
    - with floater made of stainless steel
    - adjustable height 50 - 2.000 mm
    - cable length 5 m
    - dry run protection

  • Level sensor (float switch) (Bio-)Diesel

    - Output: Reed Contact
    - Switching function: 1 closer, falling level
    - Ambient temperature range: -5 ° C to + 70 ° C
    - Medium temperature: -5 ° C to + 70 ° C
    - with floater made of stainless steel
    - adjustable height 50 - 2.000 mm
    - cable length 5 m
    - dry run protection

  • Level indicator (float switch) lubricating oil/H?O
    - floater made of stainless steel
    - adjustable height 50 - 2.000 mm,
    - Cable length: 5,000 mm
    - for lubricating oil and water
    - T: max 40 ° C
    Only delivery!
  • 1-fold cable screw
    - Reducer G2" male - M16x1.5 female
    - Cable screw M16x1,5 AG PVC
    - 1x Sealing ring
    - Only delivery!
  • 2-fold cable screw

    - Red. "G2" AG
    - 2x M16 x 1.5 IG PE
    - 2x Cable gland M16x1.5 AG PVC
    - 1x seal ring 58 x 2,5 mm
    - Only delivery!

  • 4-fold cable screw

    - Red. "G2" AG
    - 4x M16 x 1.5 IG PE
    - 4x Cable gland M16x1.5 AG PVC
    - 1x seal ring 58 x 2,5 mm
    - 2x Seal plug
    - Only delivery!

Sensors: overfill protection

Equipment required under water law to limit the max. filling level when filled by a tanker or using fixed piping.

  • limiting level transmitter Type GWG 12-K1
    - only for diesel / heating oil with CE-mark
    - with 1,5 m cable
    - Reduction 2" x 1" (AG/IG)
    - Mandatory for tanks with a volume of 1000 litres or more
  • Overfill prevention Type 76 A

    Overfill prevention Sensor

    - Type 76 A, Sensor length 200 mm
    - Connection: G 3/4" male
    Only delivery!
  • Level Limiter Type: NB 220 H

    Level Limiter Type: NB 220 H

    - with potential free changer
    - Supply: 230 V, 50 Hz
    - not to be mounted directly on the tank for media such as kerosene or bioethanol

    Only delivery!
  • Overfill protection confirmation box

    - Mounting plate
    - Voltage 24 V/DC
    - Housing protection grade IP 54
    - switch-off-electronic
    - Receipt key
    - Flash light 1 Joule
    - Horn 95 Decibel
    - Road tanker connection 907-Z
    - not to be mounted directly on the tank for media such as kerosene or bioethanol

    Only Delivery!
Sensors: Tank heating

Plant equipment for reliable prevention of paraffin excretion of the fuel at falling temperatures and maintenance of the pump and nozzle viscosity of the oil in the intake area (frost-free from 8°C to 12°C).

  • Tank heater type TH 372 up to 8000 ltr.
    - approved for diesel and heating oil EL
       - (hazard class AIII according to VbF)
    - TÜV approval
    - Power: 1,5 kW
    - Voltage: 230 V 50 Hz
    - with 1-pole controller approx. 8-12°C
       - (switches on below 8°C and off above 12°C)
    - with 1-pole limiter approx. 55°C
       - (Safety switch, switches off above 55°C if controller is defective!)
    - incl. 1-fold cable gland (AM-986)
    - Red. G2" AG -M16x1,5 IG PE
    - Cable gland M16x1.5 ET PVC
    - Sealing ring
    - Connecting cable 6 m oil-resistant with rubber protective contact plug
    Attention: Only use the heater in liquid!
  • Magnetic fixing for tank heating
    Magnetic fixing for tank heating
    consisting of:
    - 2x magnet 42mm x 9mm
    - 2x pipe clamp 40mm - 45mm
    - 2x countersunk screw and nut M6
Pumps

Z-PK is a combination of a hand vane pump and a centrifugal pump in one housing. In the event of a complete network failure, refilling of the day tank is also ensured manually with the hand vane pump.

  • Pump set 230 V

    Pumpenkombination für Heizöl und Diesel

    bestehend aus:

    • 1x Kreiselpumpe
    • Förderleistung: 5 bis 50 ltr./min.
    • 1x Handflügelpumpe
    • Förderleistung: 15 ltr./min.
    • Tropfwanne Typ Z-PK-2100
    • Korrosionsschutz
    • Nicht montiert, nur geliefert!
  • Pump set 400 V

    - Medium: diesel / heating oil
    - 1x centrifugal pump:
       - Delivery rate: 5 to 50 ltr./min.
       -Pumping height: 46 to 10 m Fl.s.
       -Pumping pressure: 3 bar
       -setting pressure: 3 bar
       -Suction height: 6 m
       -voltage: 400 V
       -current consumption: 2.0 A
       -frequency: 50 Hz
       -Electric power: 0.6 kW
       -speed: 2,900 rpm
    - 1x hand wing pump:
       - delivery rate: 15 ltr./min.
       - delivery head: approx. 10 m Fl.s.
       - suction height: 4 m
    - 1x twin pump body:
       - 4 pieces mounting holes
       - diameter: 11 mm
       - Two inlets DN 25 / 1" on the suction side
       - Outlet on the pressure side DN 20 / 3/4
       - Connection internal thread for:
       - 2 ball valves 1" for suction side
       - 1 ball valve 3/4" for pressure side
       - 1x drip tray
       - completely assembled and piped on console
    - Corrosion protection 2-component paint in RAL 7032

    Not assembled, only delivered!

  • Centrifugal pump Type PK-80-015

    Kreiselpumpe

    • Fördermenge:
    • 43 ltr./min. bei 5 m FLS
    • 11 ltr./min. bei 30 m FLS
    • Förderhöhe: 46 - 10 mWs
    • Spannung: 230 V
    • Motorleistung: 0,55 kW
    • Nennstrom: 5 A
    • Motorschutzart: IP 44
    • Korrosionsschutz
  • Centrifugal pump 43-11 ltr., 400 V

    Centrifugal pump

    • Flow rate:
      • 43 ltr./min. at 5 m FLS
      • 11 ltr./min. at 30 m FLS
    • Voltage: 400 V
    • Electrical power: 0,6 kW
    • Rated current: 2 A
    • Connections:
      • suction line: 1"
      • pressure line: 1"
    • Weight: 10,8 kg
  • Drip tray for centrifugal pump

    Drip tray for centrifugal pump for separate wall mounting

    Corrosion protection:

    • 2K paint in RAL 7032
  • Hand vane pump K1 3/4" 14 ltr/min

    - Material: cast iron
    - incl. wooden lever
    - Weight: 6,2 kg
    - Connection: 3/4"
    - Flow: 15 ltr/min
    - Flow height: 10 m
    - Suction height: 4 m
    - Corrosion protection: 2-C-coating in RAL 7032

  • Drip tray for hand vane pump
    - for separate wall mounting
    - Corrosion protection K paint in RAL 7032
  • Drip tray for hand vane pump
    - for separate wall mounting
    - Corrosion protection K paint in RAL 7032
  • Drip tray for hand vane pump
    - for separate wall mounting
    - Corrosion protection K paint in RAL 7032
  • Hand crank pump
    - Material: aluminium
    - Connection: 1".
    - Delivery rate: 100 ltr/min
    - Delivery head approx.: 10 m
    - Suction height approx.: 4 m
    - Corrosion protection: 2-component paint in RAL 7032
    - No documentation available!
Manual

* mandarory field

  • Manual by download
    After delivery you will receive an email with the links for download.
  • Manual by letter at the owner's expense
    The operating instructions, data sheets and certificates are available in paper form delivered by letter.
Price as configured:

Description

KTD-3000-LO storage tank double-walled
  • Material: steel S 235 JR
  • General type approval: Z-38.12-23
  • Volume total: 3.500 ltr.
  • Volume 95%: 3.300 ltr.
  • Medium: lubricating oil
Dimensions:
  • Length: 2.000 mm
  • Width: 1.250 mm
  • Width total: 1.260 mm
  • Height: 1.500 mm
  • Height total: 1.950 mm
  • Weight: 920 kg
Standard equipment:
  • Inspection opening NB 600 
  • Access steps in the tank for revision 
  • 4 x crane eyelets
  • Feet 130 x 100 x 4 mm
  • Connection bushings on top of the tank:
    • 9 x G 2"
    • 1 x G 1" flanged
Base package
consists of:

1x AM-595
Burst protection 115mm

1x AM-001
Float level indicator TYPE 1000

  • adjustable for tank heights from 900 up to 2.000 mm
  • Indicator scala in percent
  • Variable thread: 2" and 1 1/2"

1x AM-090
Type plate

9x AM-948
Blind plug 2" yellow conical

1x AM-947
Blind plug 1" yellow, screwable

1x X-S-700-001
Dome cover DN 700 for dome entrance DN 600

  • with opening burst disc 115
  • Material S235 JR
  • Surface: galvanized
  • Weight: 19 kg

1x N-502
Moss rubber edge profile 8x12 mm, self-adhesive

Volume: 3000 ltr.
Type: Storagetank
Place: Inside
Material: Steel
Wall Design: double walled
Level: Level 2
Medium: Lubricating oil

PDF-Documents

KTD Storage Tank Double Wall

PDF
KTD Storage Tank Double Wall

KTD-S/A4 Storage Tank Double Wall in steel and stainless steel

PDF
KTD-S/A4 Storage Tank Double Wall in steel and stainless steel

KTD-A4 Storage Tank Double Wall in stainless steel

PDF
KTD-A4 Storage Tank Double Wall in stainless steel