storage tank double wall - KTD-4500-DB

Item number: KTD-4500-DB-01

KTD-4500-DB storage tank double-walled

  • Material: Steel S 235 JR
  • Gen. building inspection approval: Z-38.12-23
  • Volume 100%: 4,980 ltr.
  • Volume 95%: 4,700 ltr.
  • Medium: diesel / bio-diesel / fuel oil

Dimensions:

  • Length: 2,500 mm
  • Width: 1,500 mm
  • Total width: 1,510 mm
  • Height: 1,500 mm
  • Total height: 1,950 mm
  • Weight: 1,180 kg

Connections:

  • 9 x G 2 "
  • 1 x G 1 "flanged

Standard features:

Inspection opening DN 600
Entry steps in the tank for revision
4 x crane eyelets
Feet 130 x 100 x 4 mm
Preparation for LAZ (with demountable console)

Category: See all


Prices visible after login
Available

Delivery status: 10-12 weeks



Packing flat

The stated packaging flat rate applies exclusively to standard packaging and exclusively to truck transport. Seaworthy packaging will be charged separately.

  • without flat-rate packaging fee for exclusive delivery of accessories
  • packaging flat
    Fix costs for packing of of tanks over 2000 ltr. up to 5000 ltr.
Coating (inside) in m

price per 1 m - the total area to be calculated is stored in the system

  • without inside coating
    raw oiled inside
  • 1 m Coating inside - bottom tray - for oily mediums
    Single or multi-layer color structure  - bottom tray -
    Corrosion protection for endurance because of the use of oily, non-aggressive mediums like lubricant oil, fuel oil, Diesel, Biodiesel, Petrol, or cooling- or lubricating water that dont tend to static charges
    - Coating area: complete floor and 300 mm of the walls
    - Surface preparation: Sandblasting Grit (Sa 2,5; Rz 50-65)
    - Layers 2 ceramic-composite layers
    - Total layer thickness NDFT: 500m
    remaining areas are raw
  • 1 m Coating - inside the tank - for oily mediums
    Single or multi-layer color structure - inside the tank -
    Corrosion protection for endurance because of the use of oily, non-aggressive mediums like lubricant oil, fuel oil, Diesel, Biodiesel, Petrol, or cooling- or lubricating water that dont tend to static charges
    - Surface preparation: Sandblasting Grit (Sa 2,5; Rz 50-65)
    - Layers: 2 ceramic-composite layers
    - Total layer thickness NDFT: 500m
Color

* mandatory field

  • RAL-7032 "Pebble gray"
    Standard outside coating color. Other RAL colors are available for an added charge.
Standardfittings und -armaturen
  • Blanking plug 2" screwable PE with seal
    Blanking plug 2" screwable PE with seal
  • Reduction 2 "x 1" PE black, Krampitz
    Reduction 2 "x 1" PE black, Krampitz Attention! Only suitable for electronic components, not for media-carrying cables!
  • Reduction 2 "x 3/4" PE black, Krampitz
    Reducer 2 "x 3/4" PE black, with sealing rubber Krampitz Attention! Only suitable for electronic components, not for media-carrying cables!
  • Ventilation socket DN 50 with cap
    Ventilation socket DN 50 with cap
    - Ventilation cap 2" female
    - Ventilation pipe 2" x 250 mm
Special options

additional equipment

  • Suction pipe 1" with foot valve
    Suction pipe 1" with foot valve
    • flanged
    • diameter 160mm
    • 4-hole flange with welded bush 1?
    • and seal
    Installed!
  • Filling socket DN 50

    Filling socket DN 50

    - consists:
    Filling tube closure K,2"
    Angle 45 , 2 "AG / AG

  • Krampitz Sealfix M 10 ml
    Krampitz Sealfix M
    • Dichtmittel
    • Schraubensicherung
    • 10 ml
Leak monitoring device

*mandatory field

  • Vacuum meter static Type KÜR 5
    Vacuum meter static Type KR 5
    Z-65.22-158, Connection 1/2"AG
    Radial connector (bottom)
  • Vakuum leak detector Diesel
    Leak monitoring device Type Eurovac-HV
    • Voltage: 230 V
    • with potential free contact
    • KVU-No.: 312.011.15
  • Leak monitoring device Type VL-330
    Leak monitoring device Type VL-330
    • Voltage: 24 V DC
    • for double-walled tanks
Sensors: Content display
  • Level Sensor

    Elektronische Stabsonde

    • Widerstands-Reedkette mit Schwimmermagnet betätigt
    • Ausgangssignal: 4-20 mA
    • Tankhöhe: 1500 mm
    • Reduzierung PE 2" auf 1.1/4"
    • Anschlussstecker M12"
  • Pressure transducer Type AUR LC-Vs
    • Pressure transducer Type AUR LC-Vs
    • Output signal 4-20 mA
  • Level control module in percent 1K

    Analysis module for the recording of percentage values of the tank level.

    • Display in percent
    • Configuration of up to 4 switching points
    • In addition a  4 - 20 mA sensor is required
    • The 4 - 20 mA signal can also be routed to other analysis modules
    • Not required for container with PLC
Sensors: Level indicator
  • Level sensor (float switch)

    Level sensor (float switch) diesel / heating oil

    • Output: Reed Contact
    • Switching function: 1 closer, falling level
    • Ambient temperature range: -5 C to + 70 C
    • Medium temperature: -5 C to + 70 C
    • with floater made of stainless steel
    • adjustable height 50 - 2.000 mm
    • cable length 5 m
    • dry run protection
  • Level sensor (float switch)

    Level sensor (float switch) diesel / heating oil

    • Output: Reed Contact
    • Switching function: 1 closer, falling level
    • Ambient temperature range: -5 C to + 70 C
    • Medium temperature: -5 C to + 70 C
    • with floater made of stainless steel
    • adjustable height 50 - 2.000 mm
    • cable length 5 m
    • dry run protection
  • Level sensor (float switch)

    Level sensor (float switch) diesel / heating oil

    • Output: Reed Contact
    • Switching function: 1 closer, falling level
    • Ambient temperature range: -5 C to + 70 C
    • Medium temperature: -5 C to + 70 C
    • with floater made of stainless steel
    • adjustable height 50 - 2.000 mm
    • cable length 5 m
    • dry run protection
  • 1-fold cable screw

    1-fach Kabelverschraubung 2" PE mit Dichtung

  • 2-fold cable screw

    2-fach Kabelverschraubung 2" PE mit Dichtung

  • 4-fold cable screw
    4-fach Kabelverschraubung 2" PE mit Dichtung
Sensors: overfill protection
  • limiting level transmitter Type GWG 12-K1
    Limit value transmitter Type GWG 12-K1
    • for diesel / heating oil only
    • with 1,5 m cable and 2" / 1" reducer (OT/IT)
  • Overfill prevention, Sensor length 200 mmType 76 A, 200 mm
    Overfill prevention Sensor
    • Type 76 A, Sensor length 200 mm
    • Connection: G 3/4" male

    Only delivery!
  • Level Limiter Type: NB 220 H

    Level Limiter Type: NB 220 H

    • with potential free changer
    • Supply: 230 V, 50 Hz
    Only delivery!
  • Overfill prevention acknowlegdement-box
    Overfill prevention acknowlegdement-box
Sensors: Tank heating

Plant equipment for reliable prevention of paraffin excretion of the fuel at falling temperatures and maintenance of the pump and nozzle viscosity of the oil in the intake area (frost-free from 8C to 12C).

  • Tank heater

    Tank heater

    • certified for diesel and heating oil
    • with TÜV-certification (Germany)
    • Power: 1,5 kW
    • Voltage: 230 V / 50 Hz,
    • with integrated 1-phase controller (appr. 8-12C)
      (ON below 8C / OFF above 12C)
    • with 1-phase limiter at appr. 55C
    • recommende for tanks up to appr. 8.000 ltr.
    • For better effectiveness of the heater a  tank insulation is strongly recommended
  • Magnetic fixing for tank heating
    Magnetic fixing for tank heating
    consisting of:
    - 2x magnet 42mm x 9mm
    - 2x pipe clamp 40mm - 45mm
    - 2x countersunk screw and nut M6
Pumps

Z-PK is a combination of a hand vane pump and a centrifugal pump in one housing. In the event of a complete network failure, refilling of the day tank is also ensured manually with the hand vane pump.

  • Pump set 230 V

    Pumpenkombination für Heizöl und Diesel

    bestehend aus:

    • 1x Kreiselpumpe
    • Förderleistung: 5 bis 50 ltr./min.
    • 1x Handflügelpumpe
    • Förderleistung: 15 ltr./min.
    • Tropfwanne Typ Z-PK-2100
    • Korrosionsschutz
    • Nicht montiert, nur geliefert!
  • Pump set 400 V
    Pump set
    for heating fuel and diesel
    consisting of:
    • 1x centrifugal pump:
      • pump power: 5 up to 50 ltr./min.
      • pump height: 46 up to 10 m Fl.s.
      • Delivery pressure: 3 bar
      • Set pressure: 3 bar
      • suction height: 6 m
      • voltage: 400 V
      • current: 2,0 A
      • frequency: 50 Hz
      • electric power: 0,6 kW
      • revolution: 2.900 U/min.
    • 1x hand vane pump:
      • pump power: 15 ltr./min.
      • pump height: ca. 10 m Fl.s.
      • suction height: 4 m
    • 1x Twin pump body with
      • 4 fixing points
      • diameter: 11 mm
    • suction side two inlets DN 25 / 1"
    • pressure side one outlet DN 20 / 3/4"
    • Connection with screwing possible
      • 2 ball valves 1" installed on suction side
      • 1 ball valve 3/4" installed on pressure side
    • 1x drip tray
      • completely mounted and tubed on the console
    • Corrosion protection:
      • 2-C-Coating in RAL 7032
    Not mounted, only delivered!
  • Centrifugal pump Type PK-80-015

    Kreiselpumpe

    • Fördermenge:
    • 43 ltr./min. bei 5 m FLS
    • 11 ltr./min. bei 30 m FLS
    • Förderhöhe: 46 - 10 mWs
    • Spannung: 230 V
    • Motorleistung: 0,55 kW
    • Nennstrom: 5 A
    • Motorschutzart: IP 44
    • Korrosionsschutz
  • Centrifugal pump 43-11 ltr., 400 V

    Centrifugal pump

    • Flow rate:
      • 43 ltr./min. at 5 m FLS
      • 11 ltr./min. at 30 m FLS
    • Voltage: 400 V
    • Electrical power: 0,6 kW
    • Rated current: 2 A
    • Connections:
      • suction line: 1"
      • pressure line: 1"
    • Weight: 10,8 kg
  • Drip tray for centrifugal pump

    Drip tray for centrifugal pump for separate wall mounting

    Corrosion protection:

    • 2K paint in RAL 7032
  • packaging flat
    Fix costs for packing Z-PK
Manual

* mandarory field

  • Manual by download
    After delivery you will receive an email with the links for download.
  • Manual by letter at the owner's expense
    Die Bedienungsanleitungen, Datenbltter und Zertifikate werden Ihnen in Papierform per Brief zugestellt.
Your configuration



Description

KTD-4500-DB storage tank double-walled

  • Material: Steel S 235 JR
  • Gen. building inspection approval: Z-38.12-23
  • Volume 100%: 4,980 ltr.
  • Volume 95%: 4,700 ltr.
  • Medium: diesel / bio-diesel / fuel oil

Dimensions:

  • Length: 2,500 mm
  • Width: 1,500 mm
  • Total width: 1,510 mm
  • Height: 1,500 mm
  • Total height: 1,950 mm
  • Weight: 1,180 kg

Connections:

  • 9 x G 2 "
  • 1 x G 1 "flanged

Standard features:

  • Inspection opening DN 600
  • Entry steps in the tank for revision
  • 4 x crane eyelets
  • Feet 130 x 100 x 4 mm
  • Preparation for LAZ (with demountable console)

basic package
consisting of:

1x AM-595
Bursting protection 115mm

1x AM-001
Float content display type 1000 Unimes

  • Unimes Universal D, GB, F
  • adjustable for tank heights from 900 to 2,000 mm
  • Scoreboard in percent
  • Stepped thread: 2 "and 1 1/2"

1x AM-925.2
Filling tube 2 ", screwed

1x AM-090
nameplate

9x AM-948
Dust caps 2 "yellow conical

1x AM-947
Dust protection sealing screw 1 "yellow screwable

1x X-S-700-001
Dome cover DN 700 for dome entry DN 600

  • with opening rupture disc 115
  • Material S235 JR
  • Surface: galvanized
  • Weight 19 kg

1x N-502
Foam rubber square profile 8x12 mm, self-adhesive

1x X-S-1-021
Flange 160 mm with 1 "socket

Corrosion protection:

  • Outside: 2-component paint finish in RAL 7032
  • (Corrosion protection system L-A-1)
  • Inside: raw / oiled
  • Documentation:
  • Test documents in German, (sent by mail)
  • certificate
  • Assembly drawing
  • Building inspection approval
  • Operating Instructions Tank
  • Data sheets / operating instructions for accessories
  • Certificates WHG and ISO 9001
  • Additional documentation in paper form, on CD or by e-mail will be charged extra

Volume: 4500 ltr.
Type: Storagetank
Medium: Diesel-biodiesel
Place: Inside
Material: Steel
Wall Design: double walled
Level: Level 2

PDF-Documents

KTD Storage Tank Double Wall

KTD-S/A4 Storage Tank Double Wall in steel and stainless steel

KTD-A4 Storage Tank Double Wall in stainless steel