storage tank double wall - KTD-9000-LO

Item number: KTD-9000-LO-01

  • Material: steel S 235 JR
  • General type approval: Z-38.12-23
  • Volume total: 9.350 ltr.
  • Volume 95%: 8.900 ltr.
  • Medium: lubricating oil
Dimensions:
  • Length: 3.400 mm
  • Width: 2.000 mm
  • Width total: 2.030 mm
  • Height: 1.500 mm
  • Height total: 1.950 mm
  • Weight: 1.840 kg

Category: See all


Prices visible after login
Available

Delivery status: 10-12 weeks



Packing flat

The stated packaging flat rate applies exclusively to standard packaging and exclusively to truck transport. Seaworthy packaging will be charged separately.

Coating (inside) in m²

The antistatic inner coating is a corrosion protection for resistance to stress caused by media such as kerosene or other fuels with a low discharge capacity and a tendency to static charging.

  • without inside coating
    raw oiled inside
  • 1 m² Coating inside - bottom tray - for oily mediums
    Single or multi-layer color structure - bottom tray -
  • 1 m²  Coating - inside the tank - for oily mediums
    Single or multi-layer color structure inside the tank
Color

* mandatory field

  • RAL-7032 "Pebble gray"
    Standard outside coating color. Other RAL colors are available for an added charge.
Standardfittings und -armaturen
  • Blanking plug 2" screwable PE with seal
    Blanking plug 2" screwable PE with seal
  • Reduction 2 "x 1" PE black, Krampitz
    Reduction 2 "x 1" PE black, Krampitz Attention! Only suitable for electronic components, not for media-carrying cables!
  • Reduction 2 "x 3/4" PE black, Krampitz
    Reducer 2 "x 3/4" PE black, with sealing rubber Krampitz Attention! Only suitable for electronic components, not for media-carrying cables!
  • Ventilation socket DN 50 with cap
    Ventilation socket DN 50 with cap
    - Ventilation cap 2" female
    - Ventilation pipe 2" x 250 mm
    - height: 250mm
Special options

additional equipment

  • Suction pipe 1" with foot valve
    Saugrohr 1" mit Fußventil
    • für Tankhöhe 2000mm, geflanscht
    • Durchmesser: 160mm
    • 4-Loch Flansch mit eingeschweißter Muffe 1"
    • Dichtung
    Montiert!
  • Filling socket DN 50

    Filling socket DN 50

    - consists:
    Filling tube closure K,2"
    Angle 45 °, 2 "AG / AG

  • Krampitz Sealfix M 10 ml
    Krampitz Sealfix M
    • Dichtmittel
    • Schraubensicherung
    • 10 ml
Leak monitoring device

*mandatory field

  • Vacuum meter static Type KÜR 5
    Vacuum meter static Type KÜR 5
    Z-65.22-158, Connection 1/2"AG
    Radial connector (bottom)
  • Vakuum leak detector Diesel
    Leak monitoring device Type Eurovac-HV
    • Voltage: 230 V
    • with potential free contact
    • KVU-No.: 312.011.15
  • Leak monitoring device Type VL-330
    Leak monitoring device Type VL-330
    • Voltage: 24 V DC
    • for double-walled tanks
Sensors: Content display
  • Level Sensor

    Elektronische Stabsonde

    • Widerstands-Reedkette mit Schwimmermagnet betätigt
    • Ausgangssignal: 4-20 mA
    • Tankhöhe: 1500 mm
    • Reduzierung PE 2" auf 1.1/4"
    • Anschlussstecker M12"
  • Pressure transducer Type AUR LC-Vs
    • Pressure transducer Type AUR LC-Vs
    • Output signal 4-20 mA
  • Level control module in percent 1K

    Analysis module for the recording of percentage values of the tank level.

    • Display in percent
    • Configuration of up to 4 switching points
    • In addition a  4 - 20 mA sensor is required
    • The 4 - 20 mA signal can also be routed to other analysis modules
    • Not required for container with PLC
Sensors: Level indicator
  • Level sensor (float switch)

    Level sensor (float switch) diesel / heating oil

    • Output: Reed Contact
    • Switching function: 1 closer, falling level
    • Ambient temperature range: -5 ° C to + 70 ° C
    • Medium temperature: -5 ° C to + 70 ° C
    • with floater made of stainless steel
    • adjustable height 50 - 2.000 mm
    • cable length 5 m
    • dry run protection
  • Level sensor (float switch)

    Level sensor (float switch) diesel / heating oil

    • Output: Reed Contact
    • Switching function: 1 closer, falling level
    • Ambient temperature range: -5 ° C to + 70 ° C
    • Medium temperature: -5 ° C to + 70 ° C
    • with floater made of stainless steel
    • adjustable height 50 - 2.000 mm
    • cable length 5 m
    • dry run protection
  • Level sensor (float switch)

    Level sensor (float switch) diesel / heating oil

    • Output: Reed Contact
    • Switching function: 1 closer, falling level
    • Ambient temperature range: -5 ° C to + 70 ° C
    • Medium temperature: -5 ° C to + 70 ° C
    • with floater made of stainless steel
    • adjustable height 50 - 2.000 mm
    • cable length 5 m
    • dry run protection
  • 1-fold cable screw

    1-fach Kabelverschraubung 2" PE mit Dichtung

  • 2-fold cable screw

    2-fach Kabelverschraubung 2" PE mit Dichtung

  • 4-fold cable screw
    4-fach Kabelverschraubung 2" PE mit Dichtung
Sensors: overfill protection

Equipment required under water law to limit the max. filling level when filled by a tanker or using fixed piping.

  • limiting level transmitter Type GWG 12-K1
    Limit value transmitter Type GWG 12-K1
    • for diesel / heating oil only
    • with 1,5 m cable and 2" / 1" reducer (OT/IT)
  • Overfill prevention, Sensor length 200 mmType 76 A, 200 mm
    Overfill prevention Sensor
    • Type 76 A, Sensor length 200 mm
    • Connection: G 3/4" male

    Only delivery!
  • Level Limiter Type: NB 220 H

    Level Limiter Type: NB 220 H

    • with potential free changer
    • Supply: 230 V, 50 Hz
    • not to be mounted directly on the tank for media such as kerosene or bioethanol
    Only delivery!
  • Overfill prevention acknowlegdement-box
    Overfill prevention acknowlegdement-box
    with road tanker switch-off-electronic
    consisting of:
    • Mounting plate
    • Voltage 24 V/DC
    • Housing protection grade IP 54
    • Receipt key
    • Flash light 1 Joule
    • Horn 95 Decibel
    • Road tanker connection 907-W (24 V/DC)
    • not to be mounted directly on the tank for media such as kerosene or bioethanol
    Only Delivery!
Sensors: Tank heating

Plant equipment for reliable prevention of paraffin excretion of the fuel at falling temperatures and maintenance of the pump and nozzle viscosity of the oil in the intake area (frost-free from 8°C to 12°C).

  • Tank heating system TH 380/3<br/><br/>- Power:      3.00
    Tank heating system TH 380/3

    - Power: 3.000 Watt
    - Voltage: 230/400 V, 50 Hz

    incl. Switch cabinet Typ AE-811
Pumps

Z-PK is a combination of a hand vane pump and a centrifugal pump in one housing. In the event of a complete network failure, refilling of the day tank is also ensured manually with the hand vane pump.

  • Pump set 230 V

    Pumpenkombination für Heizöl und Diesel

    bestehend aus:

    • 1x Kreiselpumpe
    • Förderleistung: 5 bis 50 ltr./min.
    • 1x Handflügelpumpe
    • Förderleistung: 15 ltr./min.
    • Tropfwanne Typ Z-PK-2100
    • Korrosionsschutz
    • Nicht montiert, nur geliefert!
  • Pump set 400 V
    Pump set
    for heating fuel and diesel
    consisting of:
    • 1x centrifugal pump:
      • pump power: 5 up to 50 ltr./min.
      • pump height: 46 up to 10 m Fl.s.
      • Delivery pressure: 3 bar
      • Set pressure: 3 bar
      • suction height: 6 m
      • voltage: 400 V
      • current: 2,0 A
      • frequency: 50 Hz
      • electric power: 0,6 kW
      • revolution: 2.900 U/min.
    • 1x hand vane pump:
      • pump power: 15 ltr./min.
      • pump height: ca. 10 m Fl.s.
      • suction height: 4 m
    • 1x Twin pump body with
      • 4 fixing points
      • diameter: 11 mm
    • suction side two inlets DN 25 / 1"
    • pressure side one outlet DN 20 / 3/4"
    • Connection with screwing possible
      • 2 ball valves 1" installed on suction side
      • 1 ball valve 3/4" installed on pressure side
    • 1x drip tray
      • completely mounted and tubed on the console
    • Corrosion protection:
      • 2-C-Coating in RAL 7032
    Not mounted, only delivered!
  • Centrifugal pump Type PK-80-015

    Kreiselpumpe

    • Fördermenge:
    • 43 ltr./min. bei 5 m FLS
    • 11 ltr./min. bei 30 m FLS
    • Förderhöhe: 46 - 10 mWs
    • Spannung: 230 V
    • Motorleistung: 0,55 kW
    • Nennstrom: 5 A
    • Motorschutzart: IP 44
    • Korrosionsschutz
  • Centrifugal pump 43-11 ltr., 400 V

    Centrifugal pump

    • Flow rate:
      • 43 ltr./min. at 5 m FLS
      • 11 ltr./min. at 30 m FLS
    • Voltage: 400 V
    • Electrical power: 0,6 kW
    • Rated current: 2 A
    • Connections:
      • suction line: 1"
      • pressure line: 1"
    • Weight: 10,8 kg
  • Drip tray for centrifugal pump

    Drip tray for centrifugal pump for separate wall mounting

    Corrosion protection:

    • 2K paint in RAL 7032
  • packaging flat
    Fix costs for packing Z-PK
Manual

* mandarory field

  • Manual by download
    After delivery you will receive an email with the links for download.
  • Manual by letter at the owner's expense
    Die Bedienungsanleitungen, Datenblätter und Zertifikate werden Ihnen in Papierform per Brief zugestellt.
Your configuration



Description

KTD-9000-LO storage tank double-walled
  • Material: steel S 235 JR
  • General type approval: Z-38.12-23
  • Volume total: 9.350 ltr.
  • Volume 95%: 8.900 ltr.
  • Medium: lubricating oil
Dimensions:
  • Length: 3.400 mm
  • Width: 2.000 mm
  • Width total: 2.030 mm
  • Height: 1.500 mm
  • Height total: 1.950 mm
  • Weight: 1.840 kg
Standard equipment:
  • Inspection opening NB 600 
  • Access steps in the tank for revision 
  • 4 x crane eyelets
  • Ladder outside
  • Feet 130 x 100 x 4 mm
  • Connection bushings on top of the tank:
    • 9 x G 2"
    • 1 x G 1" flanged
Base package
consists of:

1x AM-595
Burst protection 115mm

1x AM-001
Float level indicator TYPE 1000

  • adjustable for tank heights from 900 up to 2.000 mm
  • Indicator scala in percent
  • Variable thread: 2" and 1 1/2"

1x AM-090
Type plate

9x AM-948
Blind plug 2" yellow conical

1x AM-947
Blind plug 1" yellow, screwable

1x X-S-700-001
Dome cover DN 700 for dome entrance DN 600

  • with opening burst disc 115
  • Material S235 JR
  • Surface: galvanized
  • Weight: 19 kg

1x N-502
Moss rubber edge profile 8x12 mm, self-adhesive


Volume: 9000 ltr.
Type: Storagetank
Place: Inside
Material: Steel
Wall Design: double walled
Level: Level 2
Medium: Lubricating oil

PDF-Documents

KTD Storage Tank Double Wall

KTD-S/A4 Storage Tank Double Wall in steel and stainless steel

KTD-A4 Storage Tank Double Wall in stainless steel